kernel/linux.git/drivers/pci/hotplug/shpchp_ctrl.c, branch v6.19.11

PCI: shpchp: Remove hpc_ops

2024-08-02T16:39:59+00:00

Remove the hpc_ops struct from shpchp. This struct is unnecessary and no other hotplug controller implements it. A similar thing has already been done in pciehp with 82a9e79ef132 ("PCI: pciehp: remove hpc_ops"). Link: https://lore.kernel.org/r/Zp-XXVW4hlcMASEc@archbtw Signed-off-by: ngn Signed-off-by: Bjorn Helgaas

Merge tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2020-10-22T19:41:00+00:00

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...

PCI: shpchp: Remove unused 'rc' assignment

2020-09-28T22:26:02+00:00

The value of the constant POWER_FAILURE assigned to the variable rc after the power fault check is never used for anything, so remove it. Addresses-Coverity-ID: 1226899 ("Unused value") Link: https://lore.kernel.org/r/20200923025225.471459-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

PCI: shpchp: Make shpchp_unconfigure_device() void

2020-05-21T20:23:20+00:00

shpchp_unconfigure_device() always returned 0, so there's no reason for a return value. In addition, remove_board() checked the return value for possible error which is unnecessary. Convert shpchp_unconfigure_device() to a void function and remove the return value check. This addresses the following Coccinelle warning: drivers/pci/hotplug/shpchp_pci.c:66:5-7: Unneeded variable: "rc". Return "0" on line 86 Link: https://lore.kernel.org/r/20200521190457.1066600-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski Signed-off-by: Bjorn Helgaas

PCI: hotplug: Drop hotplug_slot_info

2018-09-18T22:52:15+00:00

Ever since the PCI hotplug core was introduced in 2002, drivers had to allocate and register a struct hotplug_slot_info for every slot: https://git.kernel.org/tglx/history/c/a8a2069f432c Apparently the idea was that drivers furnish the hotplug core with an up-to-date card presence status, power status, latch status and attention indicator status as well as notify the hotplug core of changes thereof. However only 4 out of 12 hotplug drivers bother to notify the hotplug core with pci_hp_change_slot_info() and the hotplug core never made any use of the information: There is just a single macro in pci_hotplug_core.c, GET_STATUS(), which uses the hotplug_slot_info if the driver lacks the corresponding callback in hotplug_slot_ops. The macro is called when the user reads the attribute via sysfs. Now, if the callback isn't defined, the attribute isn't exposed in sysfs in the first place (see e.g. has_power_file()). There are only two situations when the hotplug_slot_info would actually be accessed: * If the driver defines ->enable_slot or ->disable_slot but not ->get_power_status. * If the driver defines ->set_attention_status but not ->get_attention_status. There is no driver doing the former and just a single driver doing the latter, namely pnv_php.c. Amend it with a ->get_attention_status callback. With that, the hotplug_slot_info becomes completely unused by the PCI hotplug core. But a few drivers use it internally as a cache: cpcihp uses it to cache the latch_status and adapter_status. cpqhp uses it to cache the adapter_status. pnv_php and rpaphp use it to cache the attention_status. shpchp uses it to cache all four values. Amend these drivers to cache the information in their private slot struct. shpchp's slot struct already contains members to cache the power_status and adapter_status, so additional members are only needed for the other two values. In the case of cpqphp, the cached value is only accessed in a single place, so instead of caching it, read the current value from the hardware. Caution: acpiphp, cpci, cpqhp, shpchp, asus-wmi and eeepc-laptop populate the hotplug_slot_info with initial values on probe. That code is herewith removed. There is a theoretical chance that the code has side effects without which the driver fails to function, e.g. if the ACPI method to read the adapter status needs to be executed at least once on probe. That seems unlikely to me, still maintainers should review the changes carefully for this possibility. Rafael adds: "I'm not aware of any case in which it will break anything, [...] but if that happens, it may be necessary to add the execution of the control methods in question directly to the initialization part." Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki Acked-by: Tyrel Datwyler # drivers/pci/hotplug/rpa* Acked-by: Sebastian Ott # drivers/pci/hotplug/s390* Acked-by: Andy Shevchenko # drivers/platform/x86 Cc: Len Brown Cc: Scott Murray Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Oliver OHalloran Cc: Gavin Shan Cc: Gerald Schaefer Cc: Corentin Chary Cc: Darren Hart

PCI: Mark fall-through switch cases before enabling -Wimplicit-fallthrough

2018-07-12T21:55:57+00:00

In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva Signed-off-by: Bjorn Helgaas

PCI: shpchp: Fix AMD POGO identification

2018-06-04T17:07:31+00:00

The fix for an AMD POGO erratum related to SHPC incorrectly identified the device. The workaround should be applied only for AMD POGO devices, but it was instead applied to: - all AMD bridges, and - all devices from any vendor with device ID 0x7458 Fixes: 53044f357448 ("[PATCH] PCI Hotplug: shpchp: AMD POGO errata fix") Signed-off-by: Bjorn Helgaas Reviewed-by: Mika Westerberg Reviewed-by: Rafael J. Wysocki

PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate

2018-01-28T21:49:06+00:00

Add SPDX GPL-2.0+ to all PCI files that specified the GPL and allowed either GPL version 2 or any later version. Remove the boilerplate GPL version 2 or later language, relying on the assertion in b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") that the SPDX identifier may be used instead of the full boilerplate text. Signed-off-by: Bjorn Helgaas Reviewed-by: Greg Kroah-Hartman

PCI: Remove assignment from "if" conditions

2014-09-24T13:50:53+00:00

The following Coccinelle semantic patch was used to find and correct cases of assignments in "if" conditions: @@ expression var, expr; statement S; @@ + var = expr; if( - (var = expr) + var ) S Signed-off-by: Quentin Lambert Signed-off-by: Bjorn Helgaas