kernel/linux.git/drivers/pci/controller, branch v6.1.124

PCI: vmd: Create domain symlink before pci_bus_add_devices()

2024-12-27T12:52:51+00:00

[ Upstream commit f24c9bfcd423e2b2bb0d198456412f614ec2030a ] The vmd driver creates a "domain" symlink in sysfs for each VMD bridge. Previously this symlink was created after pci_bus_add_devices() added devices below the VMD bridge and emitted udev events to announce them to userspace. This led to a race between userspace consumers of the udev events and the kernel creation of the symlink. One such consumer is mdadm, which assembles block devices into a RAID array, and for devices below a VMD bridge, mdadm depends on the "domain" symlink. If mdadm loses the race, it may be unable to assemble a RAID array, which may cause a boot failure or other issues, with complaints like this: (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: Unable to get real path for '/sys/bus/pci/drivers/vmd/0000:c7:00.5/domain/device'' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: /dev/nvme1n1 is not attached to Intel(R) RAID controller.' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: No OROM/EFI properties for /dev/nvme1n1' (udev-worker)[2149]: nvme1n1: '/sbin/mdadm -I /dev/nvme1n1'(err) 'mdadm: no RAID superblock on /dev/nvme1n1.' (udev-worker)[2149]: nvme1n1: Process '/sbin/mdadm -I /dev/nvme1n1' failed with exit code 1. This symptom prevents the OS from booting successfully. After a NVMe disk is probed/added by the nvme driver, udevd invokes mdadm to detect if there is a mdraid associated with this NVMe disk, and mdadm determines if a NVMe device is connected to a particular VMD domain by checking the "domain" symlink. For example: Thread A Thread B Thread mdadm vmd_enable_domain pci_bus_add_devices __driver_probe_device ... work_on_cpu schedule_work_on : wakeup Thread B nvme_probe : wakeup scan_work to scan nvme disk and add nvme disk then wakeup udevd : udevd executes mdadm command flush_work main : wait for nvme_probe done ... __driver_probe_device find_driver_devices : probe next nvme device : 1) Detect domain symlink ... 2) Find domain symlink ... from vmd sysfs ... 3) Domain symlink not ... created yet; failed sysfs_create_link : create domain symlink Create the VMD "domain" symlink before invoking pci_bus_add_devices() to avoid this race. Suggested-by: Adrian Huang Link: https://lore.kernel.org/linux-pci/20240605124844.24293-1-sjiwei@163.com Signed-off-by: Jiwei Sun Signed-off-by: Krzysztof Wilczyński [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Nirmal Patel Signed-off-by: Sasha Levin

PCI: Use preserve_config in place of pci_flags

2024-12-27T12:52:51+00:00

[ Upstream commit 7246a4520b4bf1494d7d030166a11b5226f6d508 ] Use preserve_config in place of checking for PCI_PROBE_ONLY flag to enable support for "linux,pci-probe-only" on a per host bridge basis. This also obviates the use of adding PCI_REASSIGN_ALL_BUS flag if !PCI_PROBE_ONLY, as pci_assign_unassigned_root_bus_resources() takes care of reassigning the resources that are not already claimed. Link: https://lore.kernel.org/r/20240508174138.3630283-5-vidyas@nvidia.com Signed-off-by: Vidya Sagar Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: rockchip-ep: Fix address translation unit programming

2024-12-14T18:54:16+00:00

commit 64f093c4d99d797b68b407a9d8767aadc3e3ea7a upstream. The Rockchip PCIe endpoint controller handles PCIe transfers addresses by masking the lower bits of the programmed PCI address and using the same number of lower bits masked from the CPU address space used for the mapping. For a PCI mapping of bytes starting from , the number of bits masked is the number of address bits changing in the address range [pci_addr..pci_addr + size - 1]. However, rockchip_pcie_prog_ep_ob_atu() calculates num_pass_bits only using the size of the mapping, resulting in an incorrect number of mask bits depending on the value of the PCI address to map. Fix this by introducing the helper function rockchip_pcie_ep_ob_atu_num_bits() to correctly calculate the number of mask bits to use to program the address translation unit. The number of mask bits is calculated depending on both the PCI address and size of the mapping, and clamped between 8 and 20 using the macros ROCKCHIP_PCIE_AT_MIN_NUM_BITS and ROCKCHIP_PCIE_AT_MAX_NUM_BITS. As defined in the Rockchip RK3399 TRM V1.3 Part2, Sections 17.5.5.1.1 and 17.6.8.2.1, this clamping is necessary because: 1) The lower 8 bits of the PCI address to be mapped by the outbound region are ignored. So a minimum of 8 address bits are needed and imply that the PCI address must be aligned to 256. 2) The outbound memory regions are 1MB in size. So while we can specify up to 63-bits for the PCI address (num_bits filed uses bits 0 to 5 of the outbound address region 0 register), we must limit the number of valid address bits to 20 to match the memory window maximum size (1 << 20 = 1MB). Fixes: cf590b078391 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller") Link: https://lore.kernel.org/r/20241017015849.190271-2-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Add link up check to ks_pcie_other_map_bus()

2024-12-14T18:54:15+00:00

commit 9e9ec8d8692a6f64d81ef67d4fb6255af6be684b upstream. K2G forwards the error triggered by a link-down state (e.g., no connected endpoint device) on the system bus for PCI configuration transactions; these errors are reported as an SError at system level, which is fatal and hangs the system. So, apply fix similar to how it was done in the DesignWare Core driver commit 15b23906347c ("PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus()"). Fixes: 10a797c6e54a ("PCI: dwc: keystone: Use pci_ops for config space accessors") Link: https://lore.kernel.org/r/20240524105714.191642-3-s-vadapalli@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Siddharth Vadapalli [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Set mode as Root Complex for "ti,keystone-pcie" compatible

2024-12-14T18:54:15+00:00

commit 5a938ed9481b0c06cb97aec45e722a80568256fd upstream. commit 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") introduced configuring "enum dw_pcie_device_mode" as part of device data ("struct ks_pcie_of_data"). However it failed to set the mode for "ti,keystone-pcie" compatible. Since the mode defaults to "DW_PCIE_UNKNOWN_TYPE", the following error message is displayed for the v3.65a controller: "INVALID device type 0" Despite the driver probing successfully, the controller may not be functional in the Root Complex mode of operation. So, set the mode as Root Complex for "ti,keystone-pcie" compatible to fix this. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Link: https://lore.kernel.org/r/20240524105714.191642-2-s-vadapalli@ti.com Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Siddharth Vadapalli [kwilczynski: commit log, added tag for stable releases] Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: xilinx-nwl: Fix off-by-one in INTx IRQ handler

2024-10-17T13:21:15+00:00

commit 0199d2f2bd8cd97b310f7ed82a067247d7456029 upstream. MSGF_LEG_MASK is laid out with INTA in bit 0, INTB in bit 1, INTC in bit 2, and INTD in bit 3. Hardware IRQ numbers start at 0, and we register PCI_NUM_INTX IRQs. So to enable INTA (aka hwirq 0) we should set bit 0. Remove the subtraction of one. This bug would cause INTx interrupts not to be delivered, as enabling INTB would actually enable INTA, and enabling INTA wouldn't enable anything at all. It is likely that this got overlooked for so long since most PCIe hardware uses MSIs. This fixes the following UBSAN error: UBSAN: shift-out-of-bounds in ../drivers/pci/controller/pcie-xilinx-nwl.c:389:11 shift exponent 18446744073709551615 is too large for 32-bit type 'int' CPU: 1 PID: 61 Comm: kworker/u10:1 Not tainted 6.6.20+ #268 Hardware name: xlnx,zynqmp (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace (arch/arm64/kernel/stacktrace.c:235) show_stack (arch/arm64/kernel/stacktrace.c:242) dump_stack_lvl (lib/dump_stack.c:107) dump_stack (lib/dump_stack.c:114) __ubsan_handle_shift_out_of_bounds (lib/ubsan.c:218 lib/ubsan.c:387) nwl_unmask_leg_irq (drivers/pci/controller/pcie-xilinx-nwl.c:389 (discriminator 1)) irq_enable (kernel/irq/internals.h:234 kernel/irq/chip.c:170 kernel/irq/chip.c:439 kernel/irq/chip.c:432 kernel/irq/chip.c:345) __irq_startup (kernel/irq/internals.h:239 kernel/irq/chip.c:180 kernel/irq/chip.c:250) irq_startup (kernel/irq/chip.c:270) __setup_irq (kernel/irq/manage.c:1800) request_threaded_irq (kernel/irq/manage.c:2206) pcie_pme_probe (include/linux/interrupt.h:168 drivers/pci/pcie/pme.c:348) Fixes: 9a181e1093af ("PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts") Link: https://lore.kernel.org/r/20240531161337.864994-3-sean.anderson@linux.dev Signed-off-by: Sean Anderson Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

PCI: imx6: Fix missing call to phy_power_off() in error handling

2024-10-17T13:21:15+00:00

commit 5b04d44d5c74e4d8aab1678496b84700b4b343fe upstream. Fix missing call to phy_power_off() in the error path of imx6_pcie_host_init(). Remove unnecessary check for imx6_pcie->phy as the PHY API already handles NULL pointers. Fixes: cbcf8722b523 ("phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on()") Link: https://lore.kernel.org/linux-pci/20240729-pci2_upstream-v8-3-b68ee5ef2b4d@nxp.com Signed-off-by: Frank Li [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Cc: # 6.1+ Signed-off-by: Greg Kroah-Hartman

PCI: kirin: Fix buffer overflow in kirin_pcie_parse_port()

2024-10-17T13:21:06+00:00

[ Upstream commit c500a86693a126c9393e602741e348f80f1b0fc5 ] Within kirin_pcie_parse_port(), the pcie->num_slots is compared to pcie->gpio_id_reset size (MAX_PCI_SLOTS) which is correct and would lead to an overflow. Thus, fix condition to pcie->num_slots + 1 >= MAX_PCI_SLOTS and move pcie->num_slots increment below the if-statement to avoid out-of-bounds array access. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b22dbbb24571 ("PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge") Link: https://lore.kernel.org/linux-pci/20240903115823.30647-1-adiupina@astralinux.ru Signed-off-by: Alexandra Diupina [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

PCI: xilinx-nwl: Clean up clock on probe failure/removal

2024-10-17T13:21:04+00:00

[ Upstream commit cfd67903977b13f63340a4eb5a1cc890994f2c62 ] Make sure we turn off the clock on probe failure and device removal. Fixes: de0a01f52966 ("PCI: xilinx-nwl: Enable the clock through CCF") Link: https://lore.kernel.org/r/20240531161337.864994-6-sean.anderson@linux.dev Signed-off-by: Sean Anderson Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin

PCI: xilinx-nwl: Fix register misspelling

2024-10-17T13:21:04+00:00

[ Upstream commit a437027ae1730b8dc379c75fa0dd7d3036917400 ] MSIC -> MISC Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging") Link: https://lore.kernel.org/r/20240531161337.864994-4-sean.anderson@linux.dev Signed-off-by: Sean Anderson Signed-off-by: Bjorn Helgaas Signed-off-by: Sasha Levin