kernel/linux.git/drivers/pci/controller, branch v5.15.209

PCI: tegra194: Disable direct speed change for Endpoint mode

2026-06-01T15:35:32+00:00

[ Upstream commit 976f6763f57970388bcd7118931f33f447916927 ] Pre-silicon simulation showed the controller operating in Endpoint mode initiating link speed change after completing Secondary Bus Reset. Ideally, the Root Port or the Switch Downstream Port should initiate the link speed change post SBR, not the Endpoint. So, as per the hardware team recommendation, disable direct speed change for the Endpoint mode to prevent it from initiating speed change after the physical layer link is up at Gen1, leaving speed change ownership with the host. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Vidya Sagar Signed-off-by: Manikanta Maddireddy [mani: commit log] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Jon Hunter Reviewed-by: Jon Hunter Reviewed-by: Vidya Sagar Link: https://patch.msgid.link/20260324190755.1094879-8-mmaddireddy@nvidia.com Signed-off-by: Sasha Levin

PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"

2026-06-01T15:35:32+00:00

[ Upstream commit f62bc7917de1374dce86a852ffba8baf9cb7a56a ] The GPIO DT property "nvidia,refclk-select", to select the PCIe reference clock is optional. Use devm_gpiod_get_optional() to get it. Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194") Signed-off-by: Vidya Sagar Signed-off-by: Manikanta Maddireddy Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Jon Hunter Reviewed-by: Jon Hunter Reviewed-by: Vidya Sagar Link: https://patch.msgid.link/20260324190755.1094879-7-mmaddireddy@nvidia.com Signed-off-by: Sasha Levin

PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down

2026-06-01T15:35:32+00:00

[ Upstream commit 9fa0c242f8d7acf1b124d4462d18f4023573ac1c ] After the link reaches a Detect-related LTSSM state, disable LTSSM so it does not keep toggling between Polling and Detect. Do this by polling for the Detect state first, then clearing APPL_CTRL_LTSSM_EN in both tegra_pcie_dw_pme_turnoff() and pex_ep_event_pex_rst_assert(). Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar Signed-off-by: Manikanta Maddireddy Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Jon Hunter Reviewed-by: Jon Hunter Link: https://patch.msgid.link/20260324190755.1094879-4-mmaddireddy@nvidia.com Signed-off-by: Sasha Levin

PCI: tegra194: Increase LTSSM poll time on surprise link down

2026-06-01T15:35:32+00:00

[ Upstream commit 74dd8efe4d6cead433162147333af989a568aac7 ] On surprise link down, LTSSM state transits from L0 -> Recovery.RcvrLock -> Recovery.RcvrSpeed -> Gen1 Recovery.RcvrLock -> Detect. Recovery.RcvrLock and Recovery.RcvrSpeed transit times are 24 ms and 48 ms respectively, so the total time from L0 to Detect is ~96 ms. Increase the poll timeout to 120 ms to account for this. While at it, add LTSSM state defines for Detect-related states and use them in the poll condition. Use readl_poll_timeout() instead of readl_poll_timeout_atomic() in tegra_pcie_dw_pme_turnoff() since that path runs in non-atomic context. Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar Signed-off-by: Manikanta Maddireddy Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Jon Hunter Reviewed-by: Jon Hunter Link: https://patch.msgid.link/20260324190755.1094879-3-mmaddireddy@nvidia.com Signed-off-by: Sasha Levin

PCI: tegra194: Fix polling delay for L2 state

2026-06-01T15:35:32+00:00

[ Upstream commit adaffed907f14f954096555665ad6af2ae724d83 ] As per PCIe r7.0, sec 5.3.3.2.1, after sending PME_Turn_Off message, Root Port should wait for 1-10 msec for PME_TO_Ack message. Currently, driver is polling for 10 msec with 1 usec delay which is aggressive. Use existing macro PCIE_PME_TO_L2_TIMEOUT_US to poll for 10 msec with 1 msec delay. Since this function is used in non-atomic context only, use non-atomic poll function. Fixes: 56e15a238d92 ("PCI: tegra: Add Tegra194 PCIe support") Signed-off-by: Vidya Sagar Signed-off-by: Manikanta Maddireddy Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Tested-by: Jon Hunter Reviewed-by: Jon Hunter Link: https://patch.msgid.link/20260324190755.1094879-2-mmaddireddy@nvidia.com Signed-off-by: Sasha Levin

PCI: hv: Set default NUMA node to 0 for devices without affinity info

2026-06-01T15:35:02+00:00

[ Upstream commit 7b3b1e5a87b2f5e35c52b5386d7c327be869454f ] When hv_pci_assign_numa_node() processes a device that does not have HV_PCI_DEVICE_FLAG_NUMA_AFFINITY set or has an out-of-range virtual_numa_node, the device NUMA node is left unset. On x86_64, the uninitialized default happens to be 0, but on ARM64 it is NUMA_NO_NODE (-1). Tests show that when no NUMA information is available from the Hyper-V host, devices perform best when assigned to node 0. With NUMA_NO_NODE the kernel may spread work across NUMA nodes, which degrades performance on Hyper-V, particularly for high-throughput devices like MANA. Always set the device NUMA node to 0 before the conditional NUMA affinity check, so that devices get a performant default when the host provides no NUMA information, and behavior is consistent on both x86_64 and ARM64. Fixes: 999dd956d838 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2") Signed-off-by: Long Li Reviewed-by: Michael Kelley Signed-off-by: Wei Liu Signed-off-by: Sasha Levin

PCI: mediatek: Fix IRQ domain leak when MSI allocation fails

2026-03-04T12:19:33+00:00

[ Upstream commit 7f0cdcddf8bef1c8c18f9be6708073fd3790a20f ] In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains() fails after port->irq_domain has been successfully created via irq_domain_create_linear(), the function returns directly without cleaning up the allocated IRQ domain, resulting in a resource leak. Add irq_domain_remove() call in the error path to properly release the INTx IRQ domain before returning the error. Fixes: 43e6409db64d ("PCI: mediatek: Add MSI support for MT2712 and MT7622") Signed-off-by: Haotian Zhang Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn Signed-off-by: Sasha Levin

PCI: brcmstb: Fix disabling L0s capability

2026-01-19T12:10:09+00:00

[ Upstream commit 9583f9d22991d2cfb5cc59a2552040c4ae98d998 ] caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb). But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are Linux-created values that only coincidentally matched the PCIe spec. b478e162f227 ("PCI/ASPM: Consolidate link state defines") later changed them so they no longer matched the PCIe spec, so the bits ended up in the wrong place in PCI_EXP_LNKCAP. Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an 'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or L1 support otherwise. Fixes: caab002d5069 ("PCI: brcmstb: Disable L0s component of ASPM if requested") Reported-by: Bjorn Helgaas Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas Signed-off-by: Jim Quinlan [mani: reworded subject and description, added closes tag and CCed stable] Signed-off-by: Manivannan Sadhasivam [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas Reviewed-by: Florian Fainelli Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com [ Adjust context in variable declaration ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

PCI: dwc: Fix wrong PORT_LOGIC_LTSSM_STATE_MASK definition

2026-01-19T12:09:32+00:00

[ Upstream commit bcc9a4a0bca3aee4303fa4a20302e57b24ac8f68 ] As per DesignWare Cores PCI Express Controller Databook, section 5.50, SII: Debug Signals, cxpl_debug_info[63:0]: [5:0] smlh_ltssm_state: LTSSM current state. Encoding is same as the dedicated smlh_ltssm_state output. The mask should be 6 bits, from 0 to 5. Hence, fix the mask definition. Fixes: 23fe5bd4be90 ("PCI: keystone: Cleanup ks_pcie_link_up()") Signed-off-by: Shawn Lin [mani: reworded description] Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/1763122140-203068-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Sasha Levin

PCI: keystone: Exit ks_pcie_probe() for invalid mode

2026-01-19T12:09:29+00:00

[ Upstream commit 95d9c3f0e4546eaec0977f3b387549a8463cd49f ] Commit under Fixes introduced support for PCIe EP mode on AM654x platforms. When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE", the PCIe Controller is configured accordingly. However, when the mode is neither of them, an error message is displayed, but the driver probe succeeds. Since this "invalid" mode is not associated with a functional PCIe Controller, the probe should fail. Fix the behavior by exiting "ks_pcie_probe()" with the return value of "-EINVAL" in addition to displaying the existing error message when the mode is invalid. Fixes: 23284ad677a9 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms") Signed-off-by: Siddharth Vadapalli Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com Signed-off-by: Sasha Levin