kernel/linux.git/drivers/pci/controller/vmd.c, branch v6.19.11

Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-12-05T01:29:41+00:00

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan Williams) - Switch vmd from custom domain number allocator to the common allocator to prevent a potential race with new non-VMD buses (Dan Williams) - Enable Precision Time Measurement (PTM) only if device advertises support for a relevant role, to prevent invalid PTM Requests that cause ACS violations that are reported as AER Uncorrectable Non-Fatal errors (Mika Westerberg) Resource management: - Prevent resource tree corruption when BAR resize fails (Ilpo Järvinen) - Restore BARs to the original size if a BAR resize fails (Ilpo Järvinen) - Remove BAR release from BAR resize attempts by the xe, i915, and amdgpu drivers so the PCI core can restore BARs if the resize fails (Ilpo Järvinen) - Move Resizable BAR code to rebar.c (Ilpo Järvinen) - Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo Järvinen) - Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo Järvinen) Power management and error handling: - For drivers using PCI legacy suspend, save config state at suspend so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - For devices with no driver or a driver that lacks power management, save config state at hibernate so that state (not any earlier state from enumeration, probe, or error recovery) will be restored when resuming (Lukas Wunner) - Save device config space on device addition, before driver binding, so error recovery works more reliably (Lukas Wunner) - Drop pci_save_state() from several drivers that no longer need it since the PCI core always does it and pci_restore_state() no longer invalidates the saved state (Lukas Wunner) - Document use of pci_save_state() by drivers to capture the state they want restored during error recovery (Lukas Wunner) Power control: - Add a struct pci_ops.assert_perst() function pointer to assert/deassert PCIe PERST# and implement it for the qcom driver (Krishna Chaitanya Chundru) - Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe switch, which must be held in reset after poweron so the pwrctrl driver can configure the switch via I2C before bringing up the links (Krishna Chaitanya Chundru) Endpoint framework: - Convert the endpoint doorbell test to use a threaded IRQ to fix a 'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri) - Add endpoint VNTB MSI doorbell support to reduce latency between host and endpoint (Frank Li) New native PCIe controller drivers: - Add CIX Sky1 host controller DT binding and driver (Hans Zhang) - Add NXP S32G host controller DT binding and driver (Vincent Guittot) - Add Renesas RZ/G3S host controller DT binding and driver (Claudiu Beznea) - Add SpacemiT K1 host controller DT binding and driver (Alex Elder) Amlogic Meson PCIe controller driver: - Update DT binding to name DBI region 'dbi', not 'elbi', and update driver to support both (Manivannan Sadhasivam) Apple PCIe controller driver: - Move struct pci_host_bridge allocation from pci_host_common_init() to callers, which significantly simplifies pcie-apple (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable advertising ASPM L0s support correctly (Jim Quinlan) - Add a panic/die handler to print diagnostic info in case PCIe caused an unrecoverable abort (Jim Quinlan) Cadence PCIe controller driver: - Add module support for Cadence platform host and endpoint controller driver (Manikandan K Pillai) - Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare for new CIX Sky1 driver (Manikandan K Pillai) MediaTek PCIe controller driver: - Convert DT binding to YAML schema (Christian Marangi) - Add Airoha AN7583 DT compatible and driver support (Christian Marangi) Qualcomm PCIe controller driver: - Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu) - Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280, sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT schemas (Krzysztof Kozlowski) - Look up OPP using both frequency and data rate (not just frequency) so RPMh votes can account for both (Krishna Chaitanya Chundru) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK3528 compatible strings in DT binding (Yao Zi) STMicroelectronics STM32MP25 PCIe controller driver: - Fix a race between link training and endpoint register initialization (Christian Bruel) - Align endpoint allocations to match the ATU requirements (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Clear L1 PM Substate Capability 'Supported' bits unless glue driver says it's supported, which prevents users from enabling non-working L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas) - Remove now-superfluous L1SS disable code from tegra194 (Bjorn Helgaas) - Configure L1SS support in dw-rockchip when DT says 'supports-clkreq' (Shawn Lin) TI Keystone PCIe controller driver: - Fail the probe instead of silently succeeding if ks_pcie_of_data didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli) - Make keystone buildable as a loadable module, except on ARM32 where hook_fault_code() is __init (Siddharth Vadapalli)" * tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits) MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer PCI: sky1: Add PCIe host support for CIX Sky1 dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings PCI: cadence: Add support for High Perf Architecture (HPA) controller MAINTAINERS: Add NXP S32G PCIe controller driver maintainer PCI: s32g: Add NXP S32G PCIe controller driver (RC) PCI: dwc: Add register and bitfield definitions dt-bindings: PCI: s32g: Add NXP S32G PCIe controller PCI: Add Renesas RZ/G3S host controller driver PCI: host-generic: Move bridge allocation outside of pci_host_common_init() dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding PCI: Validate pci_rebar_size_supported() input Documentation: PCI: Amend error recovery doc with pci_save_state() rules treewide: Drop pci_save_state() after pci_restore_state() PCI/ERR: Ensure error recoverability at all times PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths PCI: dw-rockchip: Configure L1SS support PCI: tegra194: Remove unnecessary L1SS disable code ...

PCI: vmd: Switch to pci_bus_find_emul_domain_nr()

2025-10-28T17:38:06+00:00

The new common domain number allocator can replace the custom allocator in VMD. Beyond some code reuse benefits it does close a potential race whereby vmd_find_free_domain() collides with new PCI buses coming online with a conflicting domain number. Such a race has not been observed in practice, hence not tagging this change as a fix. As VMD uses pci_create_root_bus() rather than pci_alloc_host_bridge() + pci_scan_root_bus_bridge() it has no chance to set ->domain_nr in the bridge so needs to manage freeing the domain number on its own. Signed-off-by: Dan Williams Signed-off-by: Bjorn Helgaas Cc: Szymon Durawa Cc: Nirmal Patel Link: https://patch.msgid.link/20251024224622.1470555-3-dan.j.williams@intel.com

PCI: vmd: Override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info()

2025-10-17T13:30:34+00:00

Since commit 54f45a30c0d0 ("PCI/MSI: Add startup/shutdown for per device domains") set callback irq_startup() and irq_shutdown() of the struct pci_msi[x]_template, __irq_startup() will always invokes irq_startup() callback instead of irq_enable() callback overridden in vmd_init_dev_msi_info(). This will not start the IRQ correctly. Also override irq_startup()/irq_shutdown() in vmd_init_dev_msi_info(), so the irq_startup() can invoke the real logic. Fixes: 54f45a30c0d0 ("PCI/MSI: Add startup/shutdown for per device domains") Reported-by: Kenneth Crudup Closes: https://lore.kernel.org/r/8a923590-5b3a-406f-a324-7bd1cf894d8f@panix.com/ Reported-by: Genes Lists Closes: https://lore.kernel.org/r/4b392af8847cc19720ffcd53865f60ab3edc56b3.camel@sapience.com Reported-by: Todd Brandt Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220658 Reported-by: Oliver Hartkopp Closes: https://lore.kernel.org/r/8d6887a5-60bc-423c-8f7a-87b4ab739f6a@hartkopp.net Reported-by: Hervé Signed-off-by: Inochi Amaoto Signed-off-by: Bjorn Helgaas Tested-by: Kenneth R. Crudup Tested-by: Genes Lists Tested-by: Oliver Hartkopp Tested-by: Todd Brandt Tested-by: Hervé Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251014014607.612586-1-inochiama@gmail.com

PCI: vmd: Remove MSI-X check on child devices

2025-08-12T18:45:01+00:00

d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") added a WARN_ON sanity check that child devices support MSI-X, because VMD document says [1]: Intel VMD only supports MSIx Interrupts from child devices and therefore the BIOS must enable PCIe Hot Plug and MSIx interrups [sic]. However, the VMD device can't even tell the difference between a child device using MSI and one using MSI-X. Per 185a383ada2e ("x86/PCI: Add driver for Intel Volume Management Device (VMD)"), VMD does not support INTx interrupts, but does support child devices using either MSI or MSI-X. Remove the sanity check to avoid the WARN_ON and allow child devices to use MSI, reported by Ammar. Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") Link: https://cdrdv2-public.intel.com/776857/VMD_White_Paper.pdf [1] Reported-by: Ammar Faizi Closes: https://lore.kernel.org/linux-pci/aJXYhfc%2F6DfcqfqF@linux.gnuweeb.org/ Signed-off-by: Nam Cao [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas Tested-by: Ammar Faizi Link: https://patch.msgid.link/20250811053935.4049211-1-namcao@linutronix.de

PCI: vmd: Fix wrong kfree() in vmd_msi_free()

2025-08-07T16:30:12+00:00

vmd_msi_alloc() allocates struct vmd_irq and stashes it into irq_data->chip_data associated with the VMD's interrupt domain. vmd_msi_free() extracts the pointer by calling irq_get_chip_data() and frees it. irq_get_chip_data() returns the chip_data associated with the top interrupt domain. This worked in the past because VMD's interrupt domain was the top domain. But d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") changed the interrupt domain hierarchy so VMD's interrupt domain is not the top domain anymore. irq_get_chip_data() now returns the chip_data at the MSI devices' interrupt domains. It is therefore broken for vmd_msi_free() to kfree() this chip_data. Fix by extracting the chip_data associated with the VMD's interrupt domain. Fixes: d7d8ab87e3e7 ("PCI: vmd: Switch to msi_create_parent_irq_domain()") Reported-by: Kenneth Crudup Closes: https://lore.kernel.org/linux-pci/dfa40e48-8840-4e61-9fda-25cdb3ad81c1@panix.com/ Reported-by: Ammar Faizi Closes: https://lore.kernel.org/linux-pci/ed53280ed15d1140700b96cca2734bf327ee92539e5eb68e80f5bbbf0f01@linux.gnuweeb.org/ Tested-by: Ammar Faizi Tested-by: Kenneth Crudup Signed-off-by: Nam Cao Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner Reviewed-by: Jinjie Ruan Acked-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20250807081051.2253962-1-namcao@linutronix.de

Merge branch 'pci/controller/vmd'

2025-07-31T21:12:18+00:00

- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo) * pci/controller/vmd: PCI: vmd: Add VMD Device ID Support for Panther Lake (PTL)-H/P/U

PCI: vmd: Switch to msi_create_parent_irq_domain()

2025-07-24T21:24:16+00:00

Switch to msi_create_parent_irq_domain() from pci_msi_create_irq_domain() which was using legacy MSI domain setup. Signed-off-by: Nam Cao [mani: reworded commit message] Signed-off-by: Manivannan Sadhasivam [bhelgaas: rebase on dev_fwnode() conversion, wrap long lines, squash fix from https://lore.kernel.org/r/20250716201216.TsY3Kn45@linutronix.de] Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner Link: https://patch.msgid.link/de3f1d737831b251e9cd2cbf9e4c732a5bbba13a.1750858083.git.namcao@linutronix.de

PCI: vmd: Convert to lock guards

2025-07-24T21:24:16+00:00

Convert lock/unlock pairs to lock guard and tidy up the code. Signed-off-by: Nam Cao Signed-off-by: Manivannan Sadhasivam [bhelgaas: rebase on dev_fwnode() conversion] Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner Link: https://patch.msgid.link/836cca37449c70922a2bea1fb13f37940a7a7132.1750858083.git.namcao@linutronix.de

PCI: vmd: Add VMD Device ID Support for Panther Lake (PTL)-H/P/U

2025-06-23T11:37:04+00:00

Add VMD Device ID Support for PTL-H/P/U processors. Signed-off-by: George D Sworo [mani: expanded PTL] Signed-off-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20250606210230.340803-2-george.d.sworo@intel.com

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-03-29T02:36:53+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Enable Configuration RRS SV, which makes device readiness visible, early instead of during child bus scanning (Bjorn Helgaas) - Log debug messages about reset methods being used (Bjorn Helgaas) - Avoid reset when it has been disabled via sysfs (Nishanth Aravamudan) - Add common pci-ep-bus.yaml schema for exporting several peripherals of a single PCI function via devicetree (Andrea della Porta) - Create DT nodes for PCI host bridges to enable loading device tree overlays to create platform devices for PCI devices that have several features that require multiple drivers (Herve Codina) Resource management: - Enlarge devres table[] to accommodate bridge windows, ROM, IOV BARs, etc., and validate BAR index in devres interfaces (Philipp Stanner) - Fix typo that repeatedly distributed resources to a bridge instead of iterating over subordinate bridges, which resulted in too little space to assign some BARs (Kai-Heng Feng) - Relax bridge window tail sizing for optional resources, e.g., IOV BARs, to avoid failures when removing and re-adding devices (Ilpo Järvinen) - Allow drivers to enable devices even if we haven't assigned optional IOV resources to them (Ilpo Järvinen) - Rework handling of optional resources (IOV BARs, ROMs) to reduce failures if we can't allocate them (Ilpo Järvinen) - Fix a NULL dereference in the SR-IOV VF creation error path (Shay Drory) - Fix s390 mmio_read/write syscalls, which didn't cause page faults in some cases, which broke vfio-pci lazy mapping on first access (Niklas Schnelle) - Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which was disabled only for s390 (Niklas Schnelle) - Support mmap of PCI resources on s390 except for ISM devices (Niklas Schnelle) ASPM: - Delay pcie_link_state deallocation to avoid dangling pointers that cause invalid references during hot-unplug (Daniel Stodden) Power management: - Allow PCI bridges to go to D3Hot when suspending on all non-x86 systems (Manivannan Sadhasivam) Power control: - Create pwrctrl devices in pci_scan_device() to make it more symmetric with pci_pwrctrl_unregister() and make pwrctrl devices for PCI bridges possible (Manivannan Sadhasivam) - Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc. can still access devices after pci_stop_dev() (Manivannan Sadhasivam) - If there's a pwrctrl device for a PCI device, skip scanning it because the pwrctrl core will rescan the bus after the device is powered on (Manivannan Sadhasivam) - Add a pwrctrl driver for PCI slots based on voltage regulators described via devicetree (Manivannan Sadhasivam) Bandwidth control: - Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the set_pcie_cooling_state.sh test case (Yi Lai) - Avoid a NULL pointer dereference when we run out of bus numbers to assign for a bridge secondary bus (Lukas Wunner) Hotplug: - Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and NULL pointer checks (Lukas Wunner) - Drop shpchp module init/exit logging, replace shpchp dbg() with ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers (Ilpo Järvinen) - Drop 'shpchp_debug' module parameter in favor of standard dynamic debugging (Ilpo Järvinen) - Drop unused cpcihp .get_power(), .set_power() function pointers (Guilherme Giacomo Simoes) - Disable hotplug interrupts in portdrv only when pciehp is not enabled to avoid issuing two hotplug commands too close together (Feng Tang) - Skip pciehp 'device replaced' check if the device has been removed to address a deadlock when resuming after a device was removed during system sleep (Lukas Wunner) - Don't enable pciehp hotplug interupt when resuming in poll mode (Ilpo Järvinen) Virtualization: - Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar Dave) DOE: - Expose supported DOE features via sysfs (Alistair Francis) - Allow DOE support to be enabled even if CXL isn't enabled (Alistair Francis) Endpoint framework: - Convert PCI device data so pci-epf-test works correctly on big-endian endpoint systems (Niklas Cassel) - Add BAR_RESIZABLE type to endpoint framework and add DWC core support for EPF drivers to set BAR_RESIZABLE type and size (Niklas Cassel) - Fix pci-epf-test double free that causes an oops if the host reboots and PERST# deassertion restarts endpoint BAR allocation (Christian Bruel) - Fix endpoint BAR testing so tests can skip disabled BARs instead of reporting them as failures (Niklas Cassel) - Widen endpoint test BAR size variable to accommodate BARs larger than INT_MAX (Niklas Cassel) - Remove unused tools 'pci' build target left over after moving tests to tools/testing/selftests/pci_endpoint (Jianfeng Liu) Altera PCIe controller driver: - Add DT binding and driver support for Agilex family (P-Tile, F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar) AMD MDB PCIe controller driver: - Add DT binding and driver for AMD MDB (Multimedia DMA Bridge) (Thippeswamy Havalige) Broadcom STB PCIe controller driver: - Add BCM2712 MSI-X DT binding and interrupt controller drivers and add softdep on irq_bcm2712_mip driver to ensure that it is loaded first (Stanimir Varbanov) - Expand inbound window map to 64GB so it can accommodate BCM2712 (Stanimir Varbanov) - Add BCM2712 support and DT updates (Stanimir Varbanov) - Apply link speed restriction before bringing link up, not after (Jim Quinlan) - Update Max Link Speed in Link Capabilities via the internal writable register, not the read-only config register (Jim Quinlan) - Handle regulator_bulk_get() error to avoid panic when we call regulator_bulk_free() later (Jim Quinlan) - Disable regulators only when removing the bus immediately below a Root Port because we don't support regulators deeper in the hierarchy (Jim Quinlan) - Make const read-only arrays static (Colin Ian King) Cadence PCIe endpoint driver: - Correct MSG TLP generation so endpoints can generate INTx messages (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Identify the second controller on i.MX8MQ based on devicetree 'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu) - Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Freescale Layerscape PCIe controller driver: - Drop deprecated 'num-ib-windows' and 'num-ob-windows' and unnecessary 'status' from example (Krzysztof Kozlowski) - Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg") arg_count to fix probe failure on LS1043A (Ioana Ciornei) HiSilicon STB PCIe controller driver: - Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe JAILLET) Intel Gateway PCIe controller driver: - Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU input address (using parent_bus_offset) from devicetree (Frank Li) Intel VMD host bridge driver: - Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so pci_ops.read() will never sleep, even on PREEMPT_RT where spinlock_t becomes a sleepable lock, to avoid calling a sleeping function from invalid context (Ryo Takakura) MediaTek PCIe Gen3 controller driver: - Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo Bianconi) - Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and program host bridge memory aperture to this syscon node (Lorenzo Bianconi) Qualcomm PCIe controller driver: - Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan) - Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander Stein) - Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry Baryshkov) - Make DT iommu property required for SA8775P and prohibited for SDX55 (Dmitry Baryshkov) - Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry Baryshkov) - Add endpoint DT properties for SAR2130P and enable endpoint mode in driver (Dmitry Baryshkov) - Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as RESERVED (Manivannan Sadhasivam) Rockchip DesignWare PCIe controller driver: - Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas Cassel) Synopsys DesignWare PCIe controller driver: - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip support for DWC debugfs features (Niklas Cassel) - Add dw_pcie_parent_bus_offset() to look up the parent bus address of a specified 'reg' property and return the offset from the CPU physical address (Frank Li) - Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset via 'reg[config]' for host controllers and 'reg[addr_space]' for endpoint controllers (Frank Li) - Apply struct dw_pcie.parent_bus_offset in ATU users to remove use of .cpu_addr_fixup() when programming ATU (Frank Li) TI J721E PCIe driver: - Correct the 'link down' interrupt bit for J784S4 (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce alignment requirement from 1MB to 64KB (Niklas Cassel) Xilinx Versal CPM PCIe controller driver: - Free IRQ domain in probe error path to avoid leaking it (Thippeswamy Havalige) - Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for Versal Net CPM5NC Root Port controller (Thippeswamy Havalige) - Add driver support for CPM5_HOST1 (Thippeswamy Havalige) Miscellaneous: - Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer) - Use for_each_available_child_of_node_scoped() to simplify apple, kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)" * tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits) PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args() PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4 misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts PCI: endpoint: Add intx_capable to epc_features struct dt-bindings: PCI: Add common schema for devices accessible through PCI BARs PCI: intel-gw: Remove intel_pcie_cpu_addr() PCI: imx6: Remove imx_pcie_cpu_addr_fixup() PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup() PCI: dwc: ep: Ensure proper iteration over outbound map windows PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources() PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init() PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug PCI: dwc: Add dw_pcie_parent_bus_offset() PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant PCI: brcmstb: Make const read-only arrays static ...