kernel/linux.git/drivers/pci/controller/dwc, branch v6.1.87

PCI: dwc: endpoint: Fix advertised resizable BAR size

2024-04-03T13:19:34+00:00

[ Upstream commit 72e34b8593e08a0ee759b7a038e0b178418ea6f8 ] The commit message in commit fc9a77040b04 ("PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size") claims that it modifies the Resizable BAR capability to only advertise support for 1 MB size BARs. However, the commit writes all zeroes to PCI_REBAR_CAP (the register which contains the possible BAR sizes that a BAR be resized to). According to the spec, it is illegal to not have a bit set in PCI_REBAR_CAP, and 1 MB is the smallest size allowed. Set bit 4 in PCI_REBAR_CAP, so that we actually advertise support for a 1 MB BAR size. Before: Capabilities: [2e8 v1] Physical Resizable BAR BAR 0: current size: 1MB BAR 1: current size: 1MB BAR 2: current size: 1MB BAR 3: current size: 1MB BAR 4: current size: 1MB BAR 5: current size: 1MB After: Capabilities: [2e8 v1] Physical Resizable BAR BAR 0: current size: 1MB, supported: 1MB BAR 1: current size: 1MB, supported: 1MB BAR 2: current size: 1MB, supported: 1MB BAR 3: current size: 1MB, supported: 1MB BAR 4: current size: 1MB, supported: 1MB BAR 5: current size: 1MB, supported: 1MB Fixes: fc9a77040b04 ("PCI: designware-ep: Configure Resizable BAR cap to advertise the smallest size") Link: https://lore.kernel.org/linux-pci/20240307111520.3303774-1-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Cc: # 5.2 Signed-off-by: Sasha Levin

PCI: qcom: Enable BDF to SID translation properly

2024-04-03T13:19:34+00:00

[ Upstream commit bf79e33cdd89db498e00a6131e937259de5f2705 ] Qcom SoCs making use of ARM SMMU require BDF to SID translation table in the driver to properly map the SID for the PCIe devices based on their BDF identifier. This is currently achieved with the help of qcom_pcie_config_sid_1_9_0() function for SoCs supporting the 1_9_0 config. But With newer Qcom SoCs starting from SM8450, BDF to SID translation is set to bypass mode by default in hardware. Due to this, the translation table that is set in the qcom_pcie_config_sid_1_9_0() is essentially unused and the default SID is used for all endpoints in SoCs starting from SM8450. This is a security concern and also warrants swapping the DeviceID in DT while using the GIC ITS to handle MSIs from endpoints. The swapping is currently done like below in DT when using GIC ITS: /* * MSIs for BDF (1:0.0) only works with Device ID 0x5980. * Hence, the IDs are swapped. */ msi-map = <0x0 &gic_its 0x5981 0x1>, <0x100 &gic_its 0x5980 0x1>; Here, swapping of the DeviceIDs ensure that the endpoint with BDF (1:0.0) gets the DeviceID 0x5980 which is associated with the default SID as per the iommu mapping in DT. So MSIs were delivered with IDs swapped so far. But this also means the Root Port (0:0.0) won't receive any MSIs (for PME, AER etc...) So let's fix these issues by clearing the BDF to SID bypass mode for all SoCs making use of the 1_9_0 config. This allows the PCIe devices to use the correct SID, thus avoiding the DeviceID swapping hack in DT and also achieving the isolation between devices. Fixes: 4c9398822106 ("PCI: qcom: Add support for configuring BDF to SID mapping for SM8250") Link: https://lore.kernel.org/linux-pci/20240307-pci-bdf-sid-fix-v1-1-9423a7e2d63c@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Cc: stable@vger.kernel.org # 5.11 Signed-off-by: Sasha Levin

PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version

2024-04-03T13:19:34+00:00

[ Upstream commit 1f70939871b260b52e9d1941f1cad740b7295c2c ] qcom_pcie_config_sid_sm8250() function no longer applies only to SM8250. So let's rename it to reflect the actual IP version and also move its definition to keep it sorted as per IP revisions. Link: https://lore.kernel.org/r/20230316081117.14288-15-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Stable-dep-of: bf79e33cdd89 ("PCI: qcom: Enable BDF to SID translation properly") Signed-off-by: Sasha Levin

PCI: layerscape: Add workaround for lost link capabilities during reset

2024-03-06T14:45:05+00:00

[ Upstream commit 17cf8661ee0f065c08152e611a568dd1fb0285f1 ] The endpoint controller loses the Maximum Link Width and Supported Link Speed value from the Link Capabilities Register - initially configured by the Reset Configuration Word (RCW) - during a link-down or hot reset event. Address this issue in the endpoint event handler. Link: https://lore.kernel.org/r/20230720135834.1977616-2-Frank.Li@nxp.com Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support") Signed-off-by: Xiaowei Bao Signed-off-by: Hou Zhiqiang Signed-off-by: Frank Li Signed-off-by: Lorenzo Pieralisi Acked-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin

PCI: layerscape: Add the endpoint linkup notifier support

2024-03-06T14:45:05+00:00

[ Upstream commit 061cbfab09fb35898f2907d42f936cf9ae271d93 ] Layerscape has PME interrupt, which can be used as linkup notifier. Set CFG_READY bit of PEX_PF0_CONFIG to enable accesses from root complex when linkup detected. Link: https://lore.kernel.org/r/20230515151049.2797105-1-Frank.Li@nxp.com Signed-off-by: Xiaowei Bao Signed-off-by: Frank Li Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Acked-by: Manivannan Sadhasivam Signed-off-by: Sasha Levin

PCI: dwc: Fix a 64bit bug in dw_pcie_ep_raise_msix_irq()

2024-03-01T12:26:25+00:00

commit b5d1b4b46f856da1473c7ba9a5cdfcb55c9b2478 upstream. The "msg_addr" variable is u64. However, the "aligned_offset" is an unsigned int. This means that when the code does: msg_addr &= ~aligned_offset; it will unintentionally zero out the high 32 bits. Use ALIGN_DOWN() to do the alignment instead. Fixes: 2217fffcd63f ("PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support") Link: https://lore.kernel.org/r/af59c7ad-ab93-40f7-ad4a-7ac0b14d37f5@moroto.mountain Signed-off-by: Dan Carpenter Signed-off-by: Bjorn Helgaas Reviewed-by: Niklas Cassel Reviewed-by: Ilpo Järvinen Reviewed-by: Manivannan Sadhasivam Cc: Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

PCI: keystone: Fix race condition when initializing PHYs

2024-01-25T23:27:48+00:00

[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ] The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli Signed-off-by: Krzysztof Wilczyński Acked-by: Ravi Gunasekaran Signed-off-by: Sasha Levin

PCI: dwc: endpoint: Fix dw_pcie_ep_raise_msix_irq() alignment support

2024-01-25T23:27:44+00:00

commit 2217fffcd63f86776c985d42e76daa43a56abdf1 upstream. Commit 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") modified dw_pcie_ep_raise_msix_irq() to support iATUs which require a specific alignment. However, this support cannot have been properly tested. The whole point is for the iATU to map an address that is aligned, using dw_pcie_ep_map_addr(), and then let the writel() write to ep->msi_mem + aligned_offset. Thus, modify the address that is mapped such that it is aligned. With this change, dw_pcie_ep_raise_msix_irq() matches the logic in dw_pcie_ep_raise_msi_irq(). Link: https://lore.kernel.org/linux-pci/20231128132231.2221614-1-nks@flawful.org Fixes: 6f5e193bfb55 ("PCI: dwc: Fix dw_pcie_ep_raise_msix_irq() to get correct MSI-X table address") Signed-off-by: Niklas Cassel Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Cc: stable@vger.kernel.org # 5.7 Cc: Kishon Vijay Abraham I Signed-off-by: Greg Kroah-Hartman

PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers

2023-12-08T07:51:18+00:00

[ Upstream commit a07d2497ed657eb2efeb967af47e22f573dcd1d6 ] The DWC core driver exposes the write_dbi2() callback for writing to the DBI2 registers in a vendor-specific way. On the Qcom EP platforms, the DBI_CS2 bit in the ELBI region needs to be asserted before writing to any DBI2 registers and deasserted once done. So, let's implement the callback for the Qcom PCIe EP driver so that the DBI2 writes are correctly handled in the hardware. Without this callback, the DBI2 register writes like BAR size won't go through and as a result, the default BAR size is set for all BARs. [kwilczynski: commit log, renamed function to match the DWC convention] Fixes: f55fee56a631 ("PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver") Suggested-by: Serge Semin Link: https://lore.kernel.org/linux-pci/20231025130029.74693-2-manivannan.sadhasivam@linaro.org Signed-off-by: Manivannan Sadhasivam Signed-off-by: Krzysztof Wilczyński Reviewed-by: Serge Semin Cc: stable@vger.kernel.org # 5.16+ Signed-off-by: Sasha Levin

PCI: exynos: Don't discard .remove() callback

2023-11-28T17:07:11+00:00

commit 83a939f0fdc208ff3639dd3d42ac9b3c35607fd2 upstream. With CONFIG_PCI_EXYNOS=y and exynos_pcie_remove() marked with __exit, the function is discarded from the driver. In this case a bound device can still get unbound, e.g via sysfs. Then no cleanup code is run resulting in resource leaks or worse. The right thing to do is do always have the remove callback available. This fixes the following warning by modpost: WARNING: modpost: drivers/pci/controller/dwc/pci-exynos: section mismatch in reference: exynos_pcie_driver+0x8 (section: .data) -> exynos_pcie_remove (section: .exit.text) (with ARCH=x86_64 W=1 allmodconfig). Fixes: 340cba6092c2 ("pci: Add PCIe driver for Samsung Exynos") Link: https://lore.kernel.org/r/20231001170254.2506508-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Bjorn Helgaas Reviewed-by: Alim Akhtar Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman