kernel/linux.git/drivers/pci/controller/Kconfig, branch v5.15.210

PCI: controller: PCI_IXP4XX should depend on ARCH_IXP4XX

2021-07-23T15:10:05+00:00

The Intel IXP4xx PCI controller is only present on Intel IXP4xx XScale-based network processor SoCs. Add a dependency on ARCH_IXP4XX, to prevent asking the user about this driver when configuring a kernel without support for the XScale processor family. Link: https://lore.kernel.org/r/6a88e55fe58fc280f4ff1ca83c154e4895b6dcbf.1624972789.git.geert+renesas@glider.be Fixes: f7821b4934584824 ("PCI: ixp4xx: Add a new driver for IXP4xx") Signed-off-by: Geert Uytterhoeven [lorenzo.pieralisi@arm.com: commit log] Signed-off-by: Lorenzo Pieralisi Reviewed-by: Linus Walleij

PCI: ixp4xx: Add a new driver for IXP4xx

2021-06-17T09:42:48+00:00

This adds a new PCI controller driver for the Intel IXP4xx (IX425, IXP435 etc), based on the XScale microarchitecture. This replaces the old driver in arch/arm/mach-ixp4xx/common-pci.c which utilized the ARM-specific BIOS32 PCI framework, and all parameterization for such things as memory and IO space as well as interrupt swizzling is done from the device tree. The plan is to phase out and delete the old driver piecemal. The __raw_writel() and __raw_readl() are used for accessing the PCI controller for the same reason that these accessors are used in the timer, IRQ and GPIO drivers: the platform will alter its address bus pattern based on whether the system is booted in big- or little-endian mode. For this reason all register on IXP4xx must always be accessed in native (CPU) endianness. This driver supports 64MB of PCI memory space, but not the indirect access of 1GB that is available in the old driver. We can address that later if and only if there are users that need all 1GB of PCI address space. Krzysztof reports having to use indirect MMIO only once for a VGA card. There is work ongoing for general indirect MMIO. (In practice the indirect MMIO is performed by writing address and writing and reading values into/from a controller register.) Tested by booting the NSLU2, attaching a USB stick, mounting and browsing the drive. Link: https://lore.kernel.org/linux-arm-kernel/m37edwuv8m.fsf@t19.piap.pl/ Cc: Arnd Bergmann Cc: Imre Kaloz Cc: Krzysztof Halasa Cc: Zoltan HERPAI Cc: Raylynn Knight Acked-by: Bjorn Helgaas Reviewed-by: Arnd Bergmann Acked-by: Lorenzo Pieralisi Signed-off-by: Linus Walleij

Merge branch 'remotes/lorenzo/pci/msi'

2021-05-04T15:43:30+00:00

- Convert tegra to MSI domains (Marc Zyngier) - Use rcar controller address as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert rcar to MSI domains (Marc Zyngier) - Use xilinx port structure as MSI doorbell instead of allocating a page (Marc Zyngier) - Convert xilinx to MSI domains (Marc Zyngier) - Remove unused Hyper-V msi_controller structure (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) * remotes/lorenzo/pci/msi: PCI: Refactor HT advertising of NO_MSI flag PCI/MSI: Document the various ways of ending up with NO_MSI PCI: mediatek: Advertise lack of built-in MSI handling PCI/MSI: Make pci_host_common_probe() declare its reliance on MSI domains PCI/MSI: Let PCI host bridges declare their reliance on MSI domains PCI/MSI: Kill default_teardown_msi_irqs() PCI/MSI: Kill msi_controller structure PCI/MSI: Drop use of msi_controller from core code PCI: hv: Drop msi_controller structure PCI: xilinx: Convert to MSI domains PCI: xilinx: Don't allocate extra memory for the MSI capture address PCI: rcar: Convert to MSI domains PCI: rcar: Don't allocate extra memory for the MSI capture address PCI: tegra: Convert to MSI domains

PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192

2021-04-29T16:34:09+00:00

MediaTek's PCIe host controller has three generation HWs, the new generation HW is an individual bridge, it supports Gen3 speed and compatible with Gen2, Gen1 speed. Add support for new Gen3 controller which can be found on MT8192. Link: https://lore.kernel.org/r/20210420061723.989-4-jianjun.wang@mediatek.com Signed-off-by: Jianjun Wang Signed-off-by: Lorenzo Pieralisi Acked-by: Ryder Lee

PCI: xilinx: Convert to MSI domains

2021-04-20T13:11:21+00:00

In anticipation of the removal of the msi_controller structure, convert the ancient xilinx host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being xilinx-specific and handling the actual HW interrupt allocation. This allows us to fix some of the most appaling MSI programming, where the message programmed in the device is the virtual IRQ number instead of the allocated vector number. The allocator is also made safe with a mutex. This should allow support for MultiMSI, but I decided not to even try, since I cannot test it. Link: https://lore.kernel.org/r/20210330151145.997953-6-maz@kernel.org Tested-by: Bharat Kumar Gogada Signed-off-by: Marc Zyngier Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas

PCI: rcar: Convert to MSI domains

2021-04-20T13:11:21+00:00

In anticipation of the removal of the msi_controller structure, convert the Rcar host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being Rcar-specific and handling the actual HW interrupt allocation. Link: https://lore.kernel.org/r/20210330151145.997953-4-maz@kernel.org Tested-by: Marek Vasut Signed-off-by: Marc Zyngier [lorenzo.pieralisi@arm.com: merged fix https://lore.kernel.org/linux-pci/87y2e2p9wk.wl-maz@kernel.org] Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas

PCI: tegra: Convert to MSI domains

2021-04-20T13:11:01+00:00

In anticipation of the removal of the msi_controller structure, convert the Tegra host controller driver to MSI domains. We end-up with the usual two domain structure, the top one being a generic PCI/MSI domain, the bottom one being Tegra-specific and handling the actual HW interrupt allocation. While at it, convert the normal interrupt handler to a chained handler, handle the controller's MSI IRQ edge triggered, support multiple MSIs per device and use the AFI_MSI_EN_VEC* registers to provide MSI masking. [treding@nvidia.com: fix, clean up and address TODOs from Marc's draft] Link: https://lore.kernel.org/r/20210330151145.997953-2-maz@kernel.org Signed-off-by: Thierry Reding Signed-off-by: Marc Zyngier Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas

Merge branch 'remotes/lorenzo/pci/misc'

2021-02-24T20:59:25+00:00

- Remove IRQ handler & data together for altera, brcmstb, dwc (Martin Kaiser) - Fix xgene race in installing chained IRQ handler (Martin Kaiser) - Drop PCIE_RCAR config option (replaced by PCIE_RCAR_HOST) (Lad Prabhakar) - Fix xgene comment about CRS vs CRS SV (Bjorn Helgaas) * remotes/lorenzo/pci/misc: PCI: hv: Fix typo PCI: xgene: Fix CRS SV comment PCI: brcmstb: Remove chained IRQ handler and data in one go PCI: Drop PCIE_RCAR config option PCI: xgene-msi: Fix race in installing chained irq handler PCI: dwc: Remove IRQ handler and data in one go PCI: altera-msi: Remove IRQ handler and data in one go

Merge branch 'remotes/lorenzo/pci/tango'

2021-02-24T20:59:25+00:00

- Remove tango host controller driver (Arnd Bergmann) * remotes/lorenzo/pci/tango: PCI: Remove tango host controller driver # Conflicts: # drivers/pci/controller/Makefile

Merge branch 'pci/microchip'

2021-02-24T20:59:22+00:00

- Call platform_set_drvdata() earlier so drivers can do window setup in init functions instead of custom probe (Daire McNamara) - Add DT binding and host mode driver for Microchip PolarFire PCIe controller (Daire McNamara) * pci/microchip: MAINTAINERS: Add Daire McNamara as Microchip PCIe driver maintainer PCI: microchip: Add Microchip PolarFire PCIe controller driver dt-bindings: PCI: microchip: Add Microchip PolarFire host binding PCI: Call platform_set_drvdata earlier in devm_pci_alloc_host_bridge