kernel/linux.git/drivers/opp/opp.h, branch v5.9.12

opp: Don't drop reference for an OPP table that was never parsed

2020-08-31T09:19:47+00:00

dev_pm_opp_remove_table() should drop a reference to the OPP table only if the DT OPP table was parsed earlier with a call to dev_pm_opp_of_add_table() earlier. Else it may end up dropping the reference to the OPP table, which was added as a result of other calls like dev_pm_opp_set_clkname(). And would hence result in undesirable behavior later on when caller would try to free the resource again. Fixes: 03758d60265c ("opp: Replace list_kref with a local counter") Reported-by: Naresh Kamboju Reported-by: Anders Roxell Tested-by: Naresh Kamboju Signed-off-by: Viresh Kumar

opp: core: add regulators enable and disable

2020-05-29T04:45:12+00:00

Add enable regulators to dev_pm_opp_set_regulators() and disable regulators to dev_pm_opp_put_regulators(). Even if bootloader leaves regulators enabled, they should be enabled in kernel in order to increase the reference count. Tested-by: Marek Szyprowski Acked-by: Clément Péron Tested-by: Clément Péron Signed-off-by: Kamil Konieczny [ Viresh: Enable the regulator only after it is programmed and add a flag to track its status. ] Signed-off-by: Viresh Kumar

opp: Add support for parsing interconnect bandwidth

2020-05-29T04:45:08+00:00

The OPP bindings now support bandwidth values, so add support to parse it from device tree and store it into the new dev_pm_opp_icc_bw struct, which is part of the dev_pm_opp. Signed-off-by: Georgi Djakov Reviewed-by: Matthias Kaehlcke [ Viresh: Create _read_bw() and use it, renamed _of_find_icc_paths() to dev_pm_opp_of_find_icc_paths(), exported it and made opp_table argument optional. Also drop the depends on from Kconfig. ] Signed-off-by: Viresh Kumar

OPP: Add helpers for reading the binding properties

2020-05-13T06:18:13+00:00

The opp-hz DT property is not mandatory and we may use another property as a key in the OPP table. Add helper functions to simplify the reading and comparing the keys. Signed-off-by: Saravana Kannan Signed-off-by: Georgi Djakov Reviewed-by: Matthias Kaehlcke Reviewed-by: Sibi Sankar [ Viresh: Removed an unnecessary comment ] Signed-off-by: Viresh Kumar

opp: Replace list_kref with a local counter

2019-12-10T10:27:00+00:00

A kref or refcount isn't the right tool to be used here for counting number of devices that are sharing the static OPPs created for the OPP table. For example, we are reinitializing the kref again, after it reaches a value of 0 and frees the resources, if the static OPPs get added for the same OPP table structure (as the OPP table structure was never freed). That is messy and very unclear. This patch makes parsed_static_opps an unsigned integer and uses it to count the number of users of the static OPPs. The increment and decrement to parsed_static_opps is done under opp_table->lock now to make sure no races are possible if the OPP table is getting added and removed in parallel (which doesn't happen in practice, but can in theory). Signed-off-by: Viresh Kumar

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-03-06T20:59:46+00:00

Pull power management updates from Rafael Wysocki: "These are PM-runtime framework changes to use ktime instead of jiffies for accounting, new PM core flag to mark devices that don't need any form of power management, cpuidle updates including driver API documentation and a new governor, cpufreq updates including a new driver for Armada 8K, thermal cleanups and more, some energy-aware scheduling (EAS) enabling changes, new chips support in the intel_idle and RAPL drivers and assorted cleanups in some other places. Specifics: - Update the PM-runtime framework to use ktime instead of jiffies for accounting (Thara Gopinath, Vincent Guittot) - Optimize the autosuspend code in the PM-runtime framework somewhat (Ladislav Michl) - Add a PM core flag to mark devices that don't need any form of power management (Sudeep Holla) - Introduce driver API documentation for cpuidle and add a new cpuidle governor for tickless systems (Rafael Wysocki) - Add Jacobsville support to the intel_idle driver (Zhang Rui) - Clean up a cpuidle core header file and the cpuidle-dt and ACPI processor-idle drivers (Yangtao Li, Joseph Lo, Yazen Ghannam) - Add new cpufreq driver for Armada 8K (Gregory Clement) - Fix and clean up cpufreq core (Rafael Wysocki, Viresh Kumar, Amit Kucheria) - Add support for light-weight tear-down and bring-up of CPUs to the cpufreq core and use it in the cpufreq-dt driver (Viresh Kumar) - Fix cpu_cooling Kconfig dependencies, add support for CPU cooling auto-registration to the cpufreq core and use it in multiple cpufreq drivers (Amit Kucheria) - Fix some minor issues and do some cleanups in the davinci, e_powersaver, ap806, s5pv210, qcom and kryo cpufreq drivers (Bartosz Golaszewski, Gustavo Silva, Julia Lawall, Paweł Chmiel, Taniya Das, Viresh Kumar) - Add a Hisilicon CPPC quirk to the cppc_cpufreq driver (Xiongfeng Wang) - Clean up the intel_pstate and acpi-cpufreq drivers (Erwan Velu, Rafael Wysocki) - Clean up multiple cpufreq drivers (Yangtao Li) - Update cpufreq-related MAINTAINERS entries (Baruch Siach, Lukas Bulwahn) - Add support for exposing the Energy Model via debugfs and make multiple cpufreq drivers register an Energy Model to support energy-aware scheduling (Quentin Perret, Dietmar Eggemann, Matthias Kaehlcke) - Add Ice Lake mobile and Jacobsville support to the Intel RAPL power-capping driver (Gayatri Kammela, Zhang Rui) - Add a power estimation helper to the operating performance points (OPP) framework and clean up a core function in it (Quentin Perret, Viresh Kumar) - Make minor improvements in the generic power domains (genpd), OPP and system suspend frameworks and in the PM core (Aditya Pakki, Douglas Anderson, Greg Kroah-Hartman, Rafael Wysocki, Yangtao Li)" * tag 'pm-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (80 commits) cpufreq: kryo: Release OPP tables on module removal cpufreq: ap806: add missing of_node_put after of_device_is_available cpufreq: acpi-cpufreq: Report if CPU doesn't support boost technologies cpufreq: Pass updated policy to driver ->setpolicy() callback cpufreq: Fix two debug messages in cpufreq_set_policy() cpufreq: Reorder and simplify cpufreq_update_policy() cpufreq: Add kerneldoc comments for two core functions PM / core: Add support to skip power management in device/driver model cpufreq: intel_pstate: Rework iowait boosting to be less aggressive cpufreq: intel_pstate: Eliminate intel_pstate_get_base_pstate() cpufreq: intel_pstate: Avoid redundant initialization of local vars powercap/intel_rapl: add Ice Lake mobile ACPI / processor: Set P_LVL{2,3} idle state descriptions cpufreq / cppc: Work around for Hisilicon CPPC cpufreq ACPI / CPPC: Add a helper to get desired performance cpufreq: davinci: move configuration to include/linux/platform_data cpufreq: speedstep: convert BUG() to BUG_ON() cpufreq: powernv: fix missing check of return value in init_powernv_pstates() cpufreq: longhaul: remove unneeded semicolon cpufreq: pcc-cpufreq: remove unneeded semicolon ..

opp: no need to check return value of debugfs_create functions

2019-02-07T04:28:32+00:00

When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Viresh Kumar Cc: Nishanth Menon Cc: Stephen Boyd Cc: linux-pm@vger.kernel.org Reviewed-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman Signed-off-by: Viresh Kumar

OPP: Add support for parsing the 'opp-level' property

2019-01-22T21:06:11+00:00

Now that the OPP bindings are updated to include an optional 'opp-level' property, add support to parse it from device tree and store it as part of dev_pm_opp structure. Also add and export an helper 'dev_pm_opp_get_level()' that can be used to get the level value read from device tree when present. Reviewed-by: Stephen Boyd Acked-by: Viresh Kumar Signed-off-by: Rajendra Nayak Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross

Merge branch 'opp/genpd/propagation' into opp/linux-next

2018-12-14T10:58:52+00:00