kernel/linux.git/drivers/of, branch v4.17.1

Merge tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-05-07T15:33:29+00:00

Pull DeviceTree fixes from Rob Herring: - fix path to display timing binding - fix some typos in interrupt-names and clock-names - fix a resource leak on overlay removal - add missing documentation for R8A77965 DMA, serial, and net - cleanup sunxi pinctrl description - add Kieback & Peter GmbH vendor prefix * tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: panel: lvds: Fix path to display timing bindings dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/ dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/ of: overlay: Stop leaking resources on overlay removal dtc: checks: drop warning for missing PCI bridge bus-range dt-bindings: dmaengine: rcar-dmac: document R8A77965 support dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF dt-bindings: net: ravb: Add support for r8a77965 SoC dt-bindings: pinctrl: sunxi: Fix reference to driver doc: Add vendor prefix for Kieback & Peter GmbH

of: overlay: Stop leaking resources on overlay removal

2018-04-27T02:18:13+00:00

Only the overlay notifier callbacks have a chance to potentially get hold of references to those two resources, but they are not supposed to store them beyond OF_OVERLAY_POST_REMOVE. Document the overlay notifier API, its constraint regarding pointer lifetime, and then remove intentional leaks of ovcs->overlay_tree and ovcs->fdt from free_overlay_changeset. See also https://lkml.org/lkml/2018/4/23/1063 and following. Signed-off-by: Jan Kiszka Reviewed-by: Frank Rowand Signed-off-by: Rob Herring

earlycon: Use a pointer table to fix __earlycon_table stride

2018-04-23T08:06:59+00:00

Commit 99492c39f39f ("earlycon: Fix __earlycon_table stride") tried to fix __earlycon_table stride by forcing the earlycon_id struct alignment to 32 and asking the linker to 32-byte align the __earlycon_table symbol. This fix was based on commit 07fca0e57fca92 ("tracing: Properly align linker defined symbols") which tried a similar fix for the tracing subsystem. However, this fix doesn't quite work because there is no guarantee that gcc will place structures packed into an array format. In fact, gcc 4.9 chooses to 64-byte align these structs by inserting additional padding between the entries because it has no clue that they are supposed to be in an array. If we are unlucky, the linker will assign symbol "__earlycon_table" to a 32-byte aligned address which does not correspond to the 64-byte aligned contents of section "__earlycon_table". To address this same problem, the fix to the tracing system was subsequently re-implemented using a more robust table of pointers approach by commits: 3d56e331b653 ("tracing: Replace syscall_meta_data struct array with pointer array") 654986462939 ("tracepoints: Fix section alignment using pointer array") e4a9ea5ee7c8 ("tracing: Replace trace_event struct array with pointer array") Let's use this same "array of pointers to structs" approach for EARLYCON_TABLE. Fixes: 99492c39f39f ("earlycon: Fix __earlycon_table stride") Signed-off-by: Daniel Kurtz Suggested-by: Aaron Durbin Reviewed-by: Rob Herring Tested-by: Guenter Roeck Reviewed-by: Guenter Roeck Cc: stable Signed-off-by: Greg Kroah-Hartman

Merge tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-04-16T00:21:30+00:00

Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables

proc: add seq_put_decimal_ull_width to speed up /proc/pid/smaps

2018-04-11T17:28:33+00:00

seq_put_decimal_ull_w(m, str, val, width) prints a decimal number with a specified minimal field width. It is equivalent of seq_printf(m, "%s%*d", str, width, val), but it works much faster. == test_smaps.py num = 0 with open("/proc/1/smaps") as f: for x in xrange(10000): data = f.read() f.seek(0, 0) == == Before patch == $ time python test_smaps.py real 0m4.593s user 0m0.398s sys 0m4.158s == After patch == $ time python test_smaps.py real 0m3.828s user 0m0.413s sys 0m3.408s $ perf -g record python test_smaps.py == Before patch == - 79.01% 3.36% python [kernel.kallsyms] [k] show_smap.isra.33 - 75.65% show_smap.isra.33 + 48.85% seq_printf + 15.75% __walk_page_range + 9.70% show_map_vma.isra.23 0.61% seq_puts == After patch == - 75.51% 4.62% python [kernel.kallsyms] [k] show_smap.isra.33 - 70.88% show_smap.isra.33 + 24.82% seq_put_decimal_ull_w + 19.78% __walk_page_range + 12.74% seq_printf + 11.08% show_map_vma.isra.23 + 1.68% seq_puts [akpm@linux-foundation.org: fix drivers/of/unittest.c build] Link: http://lkml.kernel.org/r/20180212074931.7227-1-avagin@openvz.org Signed-off-by: Andrei Vagin Cc: Alexey Dobriyan Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers

2018-04-07T10:04:02+00:00

GNU Make automatically deletes intermediate files that are updated in a chain of pattern rules. Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts Example 2) %.o <- %.c <- %.c_shipped A couple of makefiles mark such targets as .PRECIOUS to prevent Make from deleting them, but the correct way is to use .SECONDARY. .SECONDARY Prerequisites of this special target are treated as intermediate files but are never automatically deleted. .PRECIOUS When make is interrupted during execution, it may delete the target file it is updating if the file was modified since make started. If you mark the file as precious, make will never delete the file if interrupted. Both can avoid deletion of intermediate files, but the difference is the behavior when Make is interrupted; .SECONDARY deletes the target, but .PRECIOUS does not. The use of .PRECIOUS is relatively rare since we do not want to keep partially constructed (possibly corrupted) targets. Another difference is that .PRECIOUS works with pattern rules whereas .SECONDARY does not. .PRECIOUS: $(obj)/%.lex.c works, but .SECONDARY: $(obj)/%.lex.c has no effect. However, for the reason above, I do not want to use .PRECIOUS which could cause obscure build breakage. The targets specified as .SECONDARY must be explicit. $(targets) contains all targets that need to include .*.cmd files. So, the intermediates you want to keep are mostly in there. Therefore, mark $(targets) as .SECONDARY. It means primary targets are also marked as .SECONDARY, but I do not see any drawback for this. I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This will make Kbuild search for non-existing .*.cmd files, but this is not a noticeable performance issue. Signed-off-by: Masahiro Yamada Acked-by: Frank Rowand Acked-by: Ingo Molnar

kbuild: add %.dtb.S and %.dtb to 'targets' automatically

2018-04-07T10:04:02+00:00

Another common pattern that consists of chained commands is to compile a DTB as binary data into the kernel image or a module. It is used in several places in the source tree. Support it in the core Makefile. $(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb) in case cmd_dt_S_dtb is changed in the future. Signed-off-by: Masahiro Yamada Acked-by: Frank Rowand

Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2018-04-07T01:31:06+00:00

Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...

Merge tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-04-06T04:03:42+00:00

Pull DeviceTree updates from Rob Herring: - Sync dtc to upstream version v1.4.6-9-gaadd0b65c987. This adds a bunch more warnings (hidden behind W=1). - Build dtc lexer and parser files instead of using shipped versions. - Rework overlay apply API to take an FDT as input and apply overlays in a single step. - Add a phandle lookup cache. This improves boot time by hundreds of msec on systems with large DT. - Add trivial mcp4017/18/19 potentiometers bindings. - Remove VLA stack usage in DT code. * tag 'devicetree-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (26 commits) of: unittest: fix an error code in of_unittest_apply_overlay() of: unittest: move misplaced function declaration of: unittest: Remove VLA stack usage of: overlay: Fix forgotten reference to of_overlay_apply() of: Documentation: Fix forgotten reference to of_overlay_apply() of: unittest: local return value variable related cleanups of: unittest: remove unneeded local return value variables dt-bindings: trivial: add various mcp4017/18/19 potentiometers of: unittest: fix an error test in of_unittest_overlay_8() of: cache phandle nodes to reduce cost of of_find_node_by_phandle() dt-bindings: rockchip-dw-mshc: use consistent clock names MAINTAINERS: Add linux/of_*.h headers to appropriate subsystems scripts: turn off some new dtc warnings by default scripts/dtc: Update to upstream version v1.4.6-9-gaadd0b65c987 scripts/dtc: generate lexer and parser during build instead of shipping powerpc: boot: add strrchr function of: overlay: do not include path in full_name of added nodes of: unittest: clean up changeset test arm64/efi: Make strrchr() available to the EFI namespace ARM: boot: add strrchr function ...

of: Add missing I/O range exception for indirect-IO devices

2018-04-04T13:42:47+00:00

There are some special ISA/LPC devices that work on a specific I/O range where it is not correct to specify a 'ranges' property in the DTS parent node as CPU addresses translated from DTS node are only for memory space on some architectures, such as ARM64. Without the parent 'ranges' property, of_translate_address() returns an error. Here we add special handling for this case. During the OF address translation, some checking will be performed to identify whether the device node is registered as indirect-IO. If it is, the I/O translation will be done in a different way from that one of PCI MMIO. In this way, the I/O 'reg' property of the special ISA/LPC devices will be parsed correctly. Tested-by: dann frazier Signed-off-by: Zhichang Yuan Signed-off-by: Gabriele Paoloni Signed-off-by: Arnd Bergmann # earlier draft Signed-off-by: Bjorn Helgaas Reviewed-by: Andy Shevchenko Acked-by: Rob Herring