kernel/linux.git/drivers/of, branch v4.14.2

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-10-22T02:44:48+00:00

Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...

of_mdio: Fix broken PHY IRQ in case of probe deferral

2017-10-22T02:20:25+00:00

If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller

device property: preserve usecount for node passed to of_fwnode_graph_get_port_parent()

2017-10-12T17:26:14+00:00

Using CONFIG_OF_DYNAMIC=y uncovered an imbalance in the usecount of the node being passed to of_fwnode_graph_get_port_parent(). Preserve the usecount by using of_get_parent() instead of of_get_next_parent() which don't decrement the usecount of the node passed to it. Fixes: 3b27d00e7b6d7c88 ("device property: Move fwnode graph ops to firmware specific locations") Signed-off-by: Niklas Söderlund Acked-by: Sakari Ailus Signed-off-by: Rob Herring

drivers: of: increase MAX_RESERVED_REGIONS to 32

2017-10-12T17:23:45+00:00

There are two types of memory reservations firmware can ask the kernel to make in the device tree: static and dynamic. See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt If you have greater than 16 entries in /reserved-memory (as we do on POWER9 systems) you would get this scary looking error message: [ 0.000000] OF: reserved mem: not enough space all defined regions. This is harmless if all your reservations are static (which with OPAL on POWER9, they are). It is not harmless if you have any dynamic reservations after the 16th. In the first pass over the fdt to find reservations, the child nodes of /reserved-memory are added to a static array in of_reserved_mem.c so that memory can be reserved in a 2nd pass. The array has 16 entries. This is why, on my dual socket POWER9 system, I get that error 4 times with 20 static reservations. We don't have a problem on ppc though, as in arch/powerpc/kernel/prom.c we look at the new style /reserved-ranges property to do reservations, and this logic was introduced in 0962e8004e974 (well before any powernv system shipped). A Google search shows up no occurances of that exact error message, so we're probably safe in that no machine that people use has memory not being reserved when it should be. The simple fix is to bump the length of the array to 32 which "should be enough for everyone(TM)". The simple fix of not recording static allocations in the array would cause problems for devices with "memory-region" properties. A more future-proof fix is likely possible, although more invasive and this simple fix is perfectly suitable in the meantime while a more future-proof fix is developed. Signed-off-by: Stewart Smith Tested-by: Mauricio Faria de Oliveira Signed-off-by: Rob Herring

of: do not leak console options

2017-10-12T17:22:04+00:00

Do not strdup() console options. It seems that the only reason for it to be strdup()-ed was a compilation warning: printk, UART and console drivers, for some reason, expect char pointer instead of const char pointer. So we can just pass `of_stdout_options', but need to cast it to char pointer. A better fix would be to change printk, console drivers and UART to accept const char `options'; but that will take time - there are lots of drivers to update. The patch also fixes a possible memory leak: add_preferred_console() can fail, but we don't kfree() options. Signed-off-by: Sergey Senozhatsky Reviewed-by: Petr Mladek Signed-off-by: Rob Herring

Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping

2017-09-12T20:30:06+00:00

Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat

Merge tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2017-09-07T21:43:33+00:00

Pull DeviceTree updates from Rob Herring: "There's a few orphans in the conversion to %pOF printf specifiers included here that no one else picked up. Summary: - Convert more DT code to use of_property_read_* API. - Improve DT overlay support when adding multiple overlays - Convert printk's to %pOF format specifiers. Most went via subsystem trees, but picked up the remaining orphans - Correct unittests to use preferred "okay" for "status" property value - Add a KASLR seed property - Vendor prefixes for Mellanox, Theobroma System, Adaptrum, Moxa - Fix modalias buffer handling - Clean-up of include paths for building dtbs - Add bindings for amc6821, isl1208, tsl2x7x, srf02, and srf10 devices - Add nvmem bindings for MediaTek MT7623 and MT7622 SoC - Add compatible string for Allwinner H5 Mali-450 GPU - Fix links to old OpenFirmware docs with new mirror on devicetree.org - Remove status property from binding doc examples" * tag 'devicetree-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) devicetree: Adjust status "ok" -> "okay" under drivers/of/ dt-bindings: Remove "status" from examples dt-bindings: pinctrl: sh-pfc: Use generic node name dt-bindings: Add vendor Mellanox dt-binding: net/phy: fix interrupts description virt: Convert to using %pOF instead of full_name macintosh: Convert to using %pOF instead of full_name ide: pmac: Convert to using %pOF instead of full_name microblaze: Convert to using %pOF instead of full_name dt-bindings: usb: musb: Grammar s/the/to/, s/is/are/ of: Use PLATFORM_DEVID_NONE definition of/device: Fix of_device_get_modalias() buffer handling of/device: Prevent buffer overflow in of_device_modalias() dt-bindings: add amc6821, isl1208 trivial bindings dt-bindings: add vendor prefix for Theobroma Systems of: search scripts/dtc/include-prefixes path for both CPP and DTC of: remove arch/$(SRCARCH)/boot/dts from include search path for CPP of: remove drivers/of/testcase-data from include search path for CPP of: return of_get_cpu_node from of_cpu_device_node_get if CPUs are not registered iio: srf08: add device tree binding for srf02 and srf10 ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2017-09-06T21:45:08+00:00

Pull networking updates from David Miller: 1) Support ipv6 checksum offload in sunvnet driver, from Shannon Nelson. 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric Dumazet. 3) Allow generic XDP to work on virtual devices, from John Fastabend. 4) Add bpf device maps and XDP_REDIRECT, which can be used to build arbitrary switching frameworks using XDP. From John Fastabend. 5) Remove UFO offloads from the tree, gave us little other than bugs. 6) Remove the IPSEC flow cache, from Florian Westphal. 7) Support ipv6 route offload in mlxsw driver. 8) Support VF representors in bnxt_en, from Sathya Perla. 9) Add support for forward error correction modes to ethtool, from Vidya Sagar Ravipati. 10) Add time filter for packet scheduler action dumping, from Jamal Hadi Salim. 11) Extend the zerocopy sendmsg() used by virtio and tap to regular sockets via MSG_ZEROCOPY. From Willem de Bruijn. 12) Significantly rework value tracking in the BPF verifier, from Edward Cree. 13) Add new jump instructions to eBPF, from Daniel Borkmann. 14) Rework rtnetlink plumbing so that operations can be run without taking the RTNL semaphore. From Florian Westphal. 15) Support XDP in tap driver, from Jason Wang. 16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal. 17) Add Huawei hinic ethernet driver. 18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan Delalande. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits) i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq i40e: avoid NVM acquire deadlock during NVM update drivers: net: xgene: Remove return statement from void function drivers: net: xgene: Configure tx/rx delay for ACPI drivers: net: xgene: Read tx/rx delay for ACPI rocker: fix kcalloc parameter order rds: Fix non-atomic operation on shared flag variable net: sched: don't use GFP_KERNEL under spin lock vhost_net: correctly check tx avail during rx busy polling net: mdio-mux: add mdio_mux parameter to mdio_mux_init() rxrpc: Make service connection lookup always check for retry net: stmmac: Delete dead code for MDIO registration gianfar: Fix Tx flow control deactivation cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6 cxgb4: Fix pause frame count in t4_get_port_stats cxgb4: fix memory leak tun: rename generic_xdp to skb_xdp tun: reserve extra headroom only when XDP is set net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping net: dsa: bcm_sf2: Advertise number of egress queues ...

Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:50:00+00:00

Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()