kernel/linux.git/drivers/nvmem/Makefile, branch v6.12.80

nvmem: core: Rework layouts to become regular devices

2023-12-15T12:30:07+00:00

Current layout support was initially written without modules support in mind. When the requirement for module support rose, the existing base was improved to adopt modularization support, but kind of a design flaw was introduced. With the existing implementation, when a storage device registers into NVMEM, the core tries to hook a layout (if any) and populates its cells immediately. This means, if the hardware description expects a layout to be hooked up, but no driver was provided for that, the storage medium will fail to probe and try later from scratch. Even if we consider that the hardware description shall be correct, we could still probe the storage device (especially if it contains the rootfs). One way to overcome this situation is to consider the layouts as devices, and leverage the native notifier mechanism. When a new NVMEM device is registered, we can populate its nvmem-layout child, if any, and wait for the matching to be done in order to get the cells (the waiting can be easily done with the NVMEM notifiers). If the layout driver is compiled as a module, it should automatically be loaded. This way, there is no strong order to enforce, any NVMEM device creation or NVMEM layout driver insertion will be observed as a new event which may lead to the creation of additional cells, without disturbing the probes with costly (and sometimes endless) deferrals. In order to achieve that goal we create a new bus for the nvmem-layouts with minimal logic to match nvmem-layout devices with nvmem-layout drivers. All this infrastructure code is created in the layouts.c file. Signed-off-by: Miquel Raynal Tested-by: Rafał Miłecki Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20231215111536.316972-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: sec-qfprom: Add Qualcomm secure QFPROM support

2023-08-23T14:34:01+00:00

For some of the Qualcomm SoC's, it is possible that some of the fuse regions or entire qfprom region is protected from non-secure access. In such situations, the OS will have to use secure calls to read the region. With that motivation, add secure qfprom driver. Signed-off-by: Komal Bajaj Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230823132744.350618-18-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: add new NXP QorIQ eFuse driver

2023-08-23T14:34:01+00:00

Add SFP (Security Fuse Processor) read support for NXP (Freescale) QorIQ series SOC's. This patch adds support for the T1023 SOC using the SFP offset from the existing T1023 device tree. In theory this should also work for T1024, T1014 and T1013 which uses the same SFP base offset. Signed-off-by: Richard Alpe Reviewed-by: Niklas Söderlund Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230823132744.350618-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: imx: support i.MX93 OCOTP

2023-06-15T11:42:17+00:00

Add i.MX93 OCOTP support. i.MX93 OCOTP has two parts: Fuse shadow block(fsb) and fuse managed by ELE. The FSB part could be directly accessed with MMIO, the ELE could only be accessed with ELE API. Currently the ELE API is not ready, so NULL function callback is used, but it was tested with downstream ELE API. Signed-off-by: Peng Fan Signed-off-by: Srinivas Kandagatla Message-ID: <20230611140330.154222-22-srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman

nvmem: core: introduce NVMEM layouts

2023-04-05T17:41:11+00:00

NVMEM layouts are used to generate NVMEM cells during runtime. Think of an EEPROM with a well-defined conent. For now, the content can be described by a device tree or a board file. But this only works if the offsets and lengths are static and don't change. One could also argue that putting the layout of the EEPROM in the device tree is the wrong place. Instead, the device tree should just have a specific compatible string. Right now there are two use cases: (1) The NVMEM cell needs special processing. E.g. if it only specifies a base MAC address offset and you need to add an offset, or it needs to parse a MAC from ASCII format or some proprietary format. (Post processing of cells is added in a later commit). (2) u-boot environment parsing. The cells don't have a particular offset but it needs parsing the content to determine the offsets and length. Co-developed-by: Miquel Raynal Signed-off-by: Miquel Raynal Signed-off-by: Michael Walle Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230404172148.82422-14-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: stm32: add OP-TEE support for STM32MP13x

2023-02-06T18:06:59+00:00

For boot with OP-TEE on STM32MP13, the communication with the secure world no more use STMicroelectronics SMC but communication with the STM32MP BSEC TA, for data access (read/write) or lock operation: - all the request are sent to OP-TEE trusted application, - for upper OTP with ECC protection and with word programming only each OTP are permanently locked when programmed to avoid ECC error on the second write operation Signed-off-by: Patrick Delaunay Reviewed-by: Etienne Carriere Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: lan9662-otp: add support

2022-09-24T12:54:38+00:00

Add support for OTP controller available on LAN9662. The OTPC controls the access to a non-volatile memory. The size of the memory is 8KB. The OTPC can access the memory based on an offset. Implement both the read and the write functionality. Signed-off-by: Horatiu Vultur Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-13-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: sort config symbols alphabetically

2022-09-24T12:54:38+00:00

1. Match what most subsystems do 2. Simplify maintenance a bit 3. Reduce amount of conflicts for new drivers patches While at it unify indent level in Makefile. Signed-off-by: Rafał Miłecki Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-9-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: prefix all symbols with NVMEM_

2022-09-24T12:54:38+00:00

This unifies all NVMEM symbols. They follow one style now. Reviewed-by: Matthias Brugger Acked-by: Arnd Bergmann Signed-off-by: Rafał Miłecki Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman

nvmem: add driver handling U-Boot environment variables

2022-09-24T12:54:37+00:00

U-Boot stores its setup as environment variables. It's a list of key-value pairs stored on flash device with a custom header. This commit adds an NVMEM driver that: 1. Provides NVMEM access to environment vars binary data 2. Extracts variables as NVMEM cells Current Linux's NVMEM sysfs API allows reading whole NVMEM data block. It can be used by user-space tools for reading U-Boot env vars block without the hassle of finding its location. Parsing will still need to be re-done there. Kernel-parsed NVMEM cells can be read however by Linux drivers. This may be useful for Ethernet drivers for reading device MAC address which is often stored as U-Boot env variable. Reviewed-by: Ahmad Fatoum Signed-off-by: Rafał Miłecki Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20220916122100.170016-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman