kernel/linux.git/drivers/nvme/target, branch v6.1.178

nvmet: remove superfluous initialization

2026-07-24T13:55:17+00:00

[ Upstream commit 8d30528a170905ede9ab6ab81f229e441808590b ] Remove superfluous initialization of status variable in nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it will get overwritten by nvmet_copy_from_sgl(). Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Stable-dep-of: 3a413ece2504 ("nvmet-auth: validate reply message payload bounds against transfer length") Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

nvmet-rdma: handle inline data with a nonzero offset

2026-07-24T13:55:05+00:00

commit 48c0162f647bb47e6084ffbc71b8f213f5e2f4f8 upstream. nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()). Fixes: 0d5ee2b2ab4f ("nvmet-rdma: support max(16KB, PAGE_SIZE) inline data") Cc: stable@vger.kernel.org Suggested-by: Keith Busch Reported-by: Bryam Vargas Signed-off-by: Bryam Vargas Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvmet-tcp: Fix potential UAF when ddgst mismatch

2026-07-24T13:54:31+00:00

commit dbbd07d0a7020b80f6a7028e561908f7b83b3d5a upstream. Shivam Kumar found via vulnerability testing: When data digest is enabled on an NVMe/TCP connection and a digest mismatch occurs on a non-final H2C_DATA PDU during an R2T-based data transfer, the digest error handler in nvmet_tcp_try_recv_ddgst() calls nvmet_req_uninit() — which performs percpu_ref_put() on the submission queue — but does NOT mark the command as completed. It does not set cqe->status, does not modify rbytes_done, and does not clear any flag. When the subsequent fatal error triggers queue teardown, nvmet_tcp_uninit_data_in_cmds() iterates all commands, checks nvmet_tcp_need_data_in() for each one, and finds that the already-uninited command still appears to need data (because rbytes_done < transfer_len and cqe->status == 0). It therefore calls nvmet_req_uninit() a second time on the same command — a double percpu_ref_put against a single percpu_ref_get. Reported-by: Shivam Kumar Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvmet-tcp: check INIT_FAILED before nvmet_req_uninit in digest error path

2026-07-24T13:54:31+00:00

commit 4606467a75cfc16721937272ed29462a750b60c8 upstream. In nvmet_tcp_try_recv_ddgst(), when a data digest mismatch is detected, nvmet_req_uninit() is called unconditionally. However, if the command arrived via the nvmet_tcp_handle_req_failure() path, nvmet_req_init() had returned false and percpu_ref_tryget_live() was never executed. The unconditional percpu_ref_put() inside nvmet_req_uninit() then causes a refcount underflow, leading to a WARNING in percpu_ref_switch_to_atomic_rcu, a use-after-free diagnostic, and eventually a permanent workqueue deadlock. Check cmd->flags & NVMET_TCP_F_INIT_FAILED before calling nvmet_req_uninit(), matching the existing pattern in nvmet_tcp_execute_request(). Reviewed-by: Christoph Hellwig Signed-off-by: Shivam Kumar Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvmet-tcp: fix race between ICReq handling and queue teardown

2026-07-24T13:54:15+00:00

commit 5293a8882c549fab4a878bc76b0b6c951f980a61 upstream. nvmet_tcp_handle_icreq() updates queue->state after sending an Initialization Connection Response (ICResp), but it does so without serializing against target-side queue teardown. If an NVMe/TCP host sends an Initialization Connection Request (ICReq) and immediately closes the connection, target-side teardown may start in softirq context before io_work drains the already buffered ICReq. In that case, nvmet_tcp_schedule_release_queue() sets queue->state to NVMET_TCP_Q_DISCONNECTING and drops the queue reference under state_lock. If io_work later processes that ICReq, nvmet_tcp_handle_icreq() can still overwrite the state back to NVMET_TCP_Q_LIVE. That defeats the DISCONNECTING-state guard in nvmet_tcp_schedule_release_queue() and allows a later socket state change to re-enter teardown and issue a second kref_put() on an already released queue. The ICResp send failure path has the same problem. If teardown has already moved the queue to DISCONNECTING, a send error can still overwrite the state with NVMET_TCP_Q_FAILED, again reopening the window for a second teardown path to drop the queue reference. Fix this by serializing both post-send state transitions with state_lock and bailing out if teardown has already started. Use -ESHUTDOWN as an internal sentinel for that bail-out path rather than propagating it as a transport error like -ECONNRESET. Keep nvmet_tcp_socket_error() setting rcv_state to NVMET_TCP_RECV_ERR before honoring that sentinel so receive-side parsing stays quiesced until the existing release path completes. Fixes: c46a6465bac2 ("nvmet-tcp: add NVMe over TCP target driver") Cc: stable@vger.kernel.org Reported-by: Shivam Kumar Tested-by: Shivam Kumar Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch [ context diff adaptation: drop `queue->state = NVMET_TCP_Q_FAILED` since the enum introduced in 6.7, 675b453e0241 ("nvmet-tcp: enable TLS handshake upcall" ] Signed-off-by: Philo Lu Signed-off-by: Sasha Levin

nvmet-tcp: propagate nvmet_tcp_build_pdu_iovec() errors to its callers

2026-06-01T15:39:27+00:00

[ Upstream commit ea8e356acb165cb1fd75537a52e1f66e5e76c538 ] Currently, when nvmet_tcp_build_pdu_iovec() detects an out-of-bounds PDU length or offset, it triggers nvmet_tcp_fatal_error(cmd->queue) and returns early. However, because the function returns void, the callers are entirely unaware that a fatal error has occurred and that the cmd->recv_msg.msg_iter was left uninitialized. Callers such as nvmet_tcp_handle_h2c_data_pdu() proceed to blindly overwrite the queue state with queue->rcv_state = NVMET_TCP_RECV_DATA Consequently, the socket receiving loop may attempt to read incoming network data into the uninitialized iterator. Fix this by shifting the error handling responsibility to the callers. Fixes: 52a0a9854934 ("nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec") Reviewed-by: Hannes Reinecke Reviewed-by: Yunje Shin Reviewed-by: Chaitanya Kulkarni Signed-off-by: Maurizio Lombardi Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvmet: avoid recursive nvmet-wq flush in nvmet_ctrl_free

2026-06-01T15:38:58+00:00

commit aade8abd8b868b6ffa9697aadaea28ec7f65bee6 upstream. nvmet_tcp_release_queue_work() runs on nvmet-wq and can drop the final controller reference through nvmet_cq_put(). If that triggers nvmet_ctrl_free(), the teardown path flushes ctrl->async_event_work on the same nvmet-wq. Call chain: nvmet_tcp_schedule_release_queue() kref_put(&queue->kref, nvmet_tcp_release_queue) nvmet_tcp_release_queue() queue_work(nvmet_wq, &queue->release_work) <--- nvmet_wq process_one_work() nvmet_tcp_release_queue_work() nvmet_cq_put(&queue->nvme_cq) nvmet_cq_destroy() nvmet_ctrl_put(cq->ctrl) nvmet_ctrl_free() flush_work(&ctrl->async_event_work) <--- nvmet_wq Previously Scheduled by :- nvmet_add_async_event queue_work(nvmet_wq, &ctrl->async_event_work); This trips lockdep with a possible recursive locking warning. [ 5223.015876] run blktests nvme/003 at 2026-04-07 20:53:55 [ 5223.061801] loop0: detected capacity change from 0 to 2097152 [ 5223.072206] nvmet: adding nsid 1 to subsystem blktests-subsystem-1 [ 5223.088368] nvmet_tcp: enabling port 0 (127.0.0.1:4420) [ 5223.126086] nvmet: Created discovery controller 1 for subsystem nqn.2014-08.org.nvmexpress.discovery for NQN nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349. [ 5223.128453] nvme nvme1: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 127.0.0.1:4420, hostnqn: nqn.2014-08.org.nvmexpress:uuid:0f01fb42-9f7f-4856-b0b3-51e60b8de349 [ 5233.199447] nvme nvme1: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" [ 5233.227718] ============================================ [ 5233.231283] WARNING: possible recursive locking detected [ 5233.234696] 7.0.0-rc3nvme+ #20 Tainted: G O N [ 5233.238434] -------------------------------------------- [ 5233.241852] kworker/u192:6/2413 is trying to acquire lock: [ 5233.245429] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90 [ 5233.251438] but task is already holding lock: [ 5233.255254] ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.261125] other info that might help us debug this: [ 5233.265333] Possible unsafe locking scenario: [ 5233.269217] CPU0 [ 5233.270795] ---- [ 5233.272436] lock((wq_completion)nvmet-wq); [ 5233.275241] lock((wq_completion)nvmet-wq); [ 5233.278020] *** DEADLOCK *** [ 5233.281793] May be due to missing lock nesting notation [ 5233.286195] 3 locks held by kworker/u192:6/2413: [ 5233.289192] #0: ffff888111632548 ((wq_completion)nvmet-wq){+.+.}-{0:0}, at: process_one_work+0x5cc/0x6e0 [ 5233.294569] #1: ffffc9000e2a7e40 ((work_completion)(&queue->release_work)){+.+.}-{0:0}, at: process_one_work+0x1c5/0x6e0 [ 5233.300128] #2: ffffffff82d7dc40 (rcu_read_lock){....}-{1:3}, at: __flush_work+0x62/0x530 [ 5233.304290] stack backtrace: [ 5233.306520] CPU: 4 UID: 0 PID: 2413 Comm: kworker/u192:6 Tainted: G O N 7.0.0-rc3nvme+ #20 PREEMPT(full) [ 5233.306524] Tainted: [O]=OOT_MODULE, [N]=TEST [ 5233.306525] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 5233.306527] Workqueue: nvmet-wq nvmet_tcp_release_queue_work [nvmet_tcp] [ 5233.306532] Call Trace: [ 5233.306534] [ 5233.306536] dump_stack_lvl+0x73/0xb0 [ 5233.306552] print_deadlock_bug+0x225/0x2f0 [ 5233.306556] __lock_acquire+0x13f0/0x2290 [ 5233.306563] lock_acquire+0xd0/0x300 [ 5233.306565] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306571] ? __flush_work+0x20b/0x530 [ 5233.306573] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306577] touch_wq_lockdep_map+0x3b/0x90 [ 5233.306580] ? touch_wq_lockdep_map+0x26/0x90 [ 5233.306583] ? __flush_work+0x20b/0x530 [ 5233.306585] __flush_work+0x268/0x530 [ 5233.306588] ? __pfx_wq_barrier_func+0x10/0x10 [ 5233.306594] ? xen_error_entry+0x30/0x60 [ 5233.306600] nvmet_ctrl_free+0x140/0x310 [nvmet] [ 5233.306617] nvmet_cq_put+0x74/0x90 [nvmet] [ 5233.306629] nvmet_tcp_release_queue_work+0x19f/0x360 [nvmet_tcp] [ 5233.306634] process_one_work+0x206/0x6e0 [ 5233.306640] worker_thread+0x184/0x320 [ 5233.306643] ? __pfx_worker_thread+0x10/0x10 [ 5233.306646] kthread+0xf1/0x130 [ 5233.306648] ? __pfx_kthread+0x10/0x10 [ 5233.306651] ret_from_fork+0x355/0x450 [ 5233.306653] ? __pfx_kthread+0x10/0x10 [ 5233.306656] ret_from_fork_asm+0x1a/0x30 [ 5233.306664] There is also no need to flush async_event_work from controller teardown. The admin queue teardown already fails outstanding AER requests before the final controller put :- nvmet_sq_destroy(admin sq) nvmet_async_events_failall(ctrl) The controller has already been removed from the subsystem list before nvmet_ctrl_free() quiesces outstanding work. Replace flush_work() with cancel_work_sync() so a pending async_event_work item is canceled and a running instance is waited on without recursing into the same workqueue. Fixes: 06406d81a2d7 ("nvmet: cancel fatal error and flush async work before free controller") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec

2026-02-11T12:37:19+00:00

commit 52a0a98549344ca20ad81a4176d68d28e3c05a5c upstream. nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU length or offset exceeds sg_cnt and then use bogus sg->length/offset values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining entries, and sg->length/offset before building the bvec. Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: YunJe Shin Reviewed-by: Sagi Grimberg Reviewed-by: Joonkyo Jung Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec

2026-02-06T15:43:54+00:00

[ Upstream commit 32b63acd78f577b332d976aa06b56e70d054cbba ] Commit efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") added ttag bounds checking and data_offset validation in nvmet_tcp_handle_h2c_data_pdu(), but it did not validate whether the command's data structures (cmd->req.sg and cmd->iov) have been properly initialized before processing H2C_DATA PDUs. The nvmet_tcp_build_pdu_iovec() function dereferences these pointers without NULL checks. This can be triggered by sending H2C_DATA PDU immediately after the ICREQ/ICRESP handshake, before sending a CONNECT command or NVMe write command. Attack vectors that trigger NULL pointer dereferences: 1. H2C_DATA PDU sent before CONNECT → both pointers NULL 2. H2C_DATA PDU for READ command → cmd->req.sg allocated, cmd->iov NULL 3. H2C_DATA PDU for uninitialized command slot → both pointers NULL The fix validates both cmd->req.sg and cmd->iov before calling nvmet_tcp_build_pdu_iovec(). Both checks are required because: - Uninitialized commands: both NULL - READ commands: cmd->req.sg allocated, cmd->iov NULL - WRITE commands: both allocated Fixes: efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") Reviewed-by: Sagi Grimberg Signed-off-by: Shivam Kumar Signed-off-by: Keith Busch Signed-off-by: Sasha Levin

nvmet-tcp: remove boilerplate code

2026-02-06T15:43:54+00:00

[ Upstream commit 75011bd0f9c55db523242f9f9a0b0b826165f14b ] Simplify the nvmet_tcp_handle_h2c_data_pdu() function by removing boilerplate code. Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Stable-dep-of: 32b63acd78f5 ("nvme-tcp: fix NULL pointer dereferences in nvmet_tcp_build_pdu_iovec") Signed-off-by: Sasha Levin