kernel/linux.git/drivers/nvme/target, branch v4.19.16

nvmet-rdma: fix response use after free

2018-12-21T13:15:25+00:00

[ Upstream commit d7dcdf9d4e15189ecfda24cc87339a3425448d5c ] nvmet_rdma_release_rsp() may free the response before using it at error flow. Fixes: 8407879 ("nvmet-rdma: fix possible bogus dereference under heavy load") Signed-off-by: Israel Rukshin Reviewed-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme: count all ANA groups for ANA Log page

2018-09-17T13:49:40+00:00

When issuing a short read on the ANA log page the number of groups should not change, even though the final returned data might contain less groups than that number. Signed-off-by: Hannes Reinecke [switched to a for loop] Signed-off-by: Christoph Hellwig

nvmet-rdma: fix possible bogus dereference under heavy load

2018-09-05T19:18:01+00:00

Currently we always repost the recv buffer before we send a response capsule back to the host. Since ordering is not guaranteed for send and recv completions, it is posible that we will receive a new request from the host before we got a send completion for the response capsule. Today, we pre-allocate 2x rsps the length of the queue, but in reality, under heavy load there is nothing that is really preventing the gap to expand until we exhaust all our rsps. To fix this, if we don't have any pre-allocated rsps left, we dynamically allocate a rsp and make sure to free it when we are done. If under memory pressure we fail to allocate a rsp, we silently drop the command and wait for the host to retry. Reported-by: Steve Wise Tested-by: Steve Wise Signed-off-by: Sagi Grimberg [hch: dropped a superflous assignment] Signed-off-by: Christoph Hellwig

nvmet: free workqueue object if module init fails

2018-08-28T06:40:44+00:00

Signed-off-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig

nvme-fcloop: Fix dropped LS's to removed target port

2018-08-28T06:40:43+00:00

When a targetport is removed from the config, fcloop will avoid calling the LS done() routine thinking the targetport is gone. This leaves the initiator reset/reconnect hanging as it waits for a status on the Create_Association LS for the reconnect. Change the filter in the LS callback path. If tport null (set when failed validation before "sending to remote port"), be sure to call done. This was the main bug. But, continue the logic that only calls done if tport was set but there is no remoteport (e.g. case where remoteport has been removed, thus host doesn't expect a completion). Signed-off-by: James Smart Signed-off-by: Christoph Hellwig

Merge branch 'linus/master' into rdma.git for-next

2018-08-16T20:21:29+00:00

rdma.git merge resolution for the 4.19 merge window Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate Signed-off-by: Jason Gunthorpe

Merge tag 'v4.18' into rdma.git for-next

2018-08-16T19:12:00+00:00

Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe

Merge tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block

2018-08-14T17:23:25+00:00

Pull block updates from Jens Axboe: "First pull request for this merge window, there will also be a followup request with some stragglers. This pull request contains: - Fix for a thundering heard issue in the wbt block code (Anchal Agarwal) - A few NVMe pull requests: * Improved tracepoints (Keith) * Larger inline data support for RDMA (Steve Wise) * RDMA setup/teardown fixes (Sagi) * Effects log suppor for NVMe target (Chaitanya Kulkarni) * Buffered IO suppor for NVMe target (Chaitanya Kulkarni) * TP4004 (ANA) support (Christoph) * Various NVMe fixes - Block io-latency controller support. Much needed support for properly containing block devices. (Josef) - Series improving how we handle sense information on the stack (Kees) - Lightnvm fixes and updates/improvements (Mathias/Javier et al) - Zoned device support for null_blk (Matias) - AIX partition fixes (Mauricio Faria de Oliveira) - DIF checksum code made generic (Max Gurtovoy) - Add support for discard in iostats (Michael Callahan / Tejun) - Set of updates for BFQ (Paolo) - Removal of async write support for bsg (Christoph) - Bio page dirtying and clone fixups (Christoph) - Set of bcache fix/changes (via Coly) - Series improving blk-mq queue setup/teardown speed (Ming) - Series improving merging performance on blk-mq (Ming) - Lots of other fixes and cleanups from a slew of folks" * tag 'for-4.19/block-20180812' of git://git.kernel.dk/linux-block: (190 commits) blkcg: Make blkg_root_lookup() work for queues in bypass mode bcache: fix error setting writeback_rate through sysfs interface null_blk: add lock drop/acquire annotation Blk-throttle: reduce tail io latency when iops limit is enforced block: paride: pd: mark expected switch fall-throughs block: Ensure that a request queue is dissociated from the cgroup controller block: Introduce blk_exit_queue() blkcg: Introduce blkg_root_lookup() block: Remove two superfluous #include directives blk-mq: count the hctx as active before allocating tag block: bvec_nr_vecs() returns value for wrong slab bcache: trivial - remove tailing backslash in macro BTREE_FLAG bcache: make the pr_err statement used for ENOENT only in sysfs_attatch section bcache: set max writeback rate when I/O request is idle bcache: add code comments for bset.c bcache: fix mistaken comments in request.c bcache: fix mistaken code comments in bcache.h bcache: add a comment in super.c bcache: avoid unncessary cache prefetch bch_btree_node_get() bcache: display rate debug parameters to 0 when writeback is not running ...

nvmet: add ns write protect support

2018-08-08T10:00:53+00:00

This patch implements the Namespace Write Protect feature described in "NVMe TP 4005a Namespace Write Protect". In this version, we implement No Write Protect and Write Protect states for target ns which can be toggled by set-features commands from the host side. For write-protect state transition, we need to flush the ns specified as a part of command so we also add helpers for carrying out synchronous flush operations. Signed-off-by: Chaitanya Kulkarni [hch: fixed an incorrect endianess conversion, minor cleanups] Signed-off-by: Christoph Hellwig

nvmet: use Retain Async Event bit to clear AEN

2018-07-27T17:14:31+00:00

In the current implementation, we clear the AEN bit when we get the "get log page" command if given log page is associated with AEN. This patch allows optionally retaining the AEN for the ctrl under consideration when Retain Asynchronous Event (RAE) bit is set as a part of "get log page" command. This allows the host to read the Log page and optionally retaining the AEN associated with this log page when using userspace tools like nvme-cli. Signed-off-by: Chaitanya Kulkarni [hch: also use the new helper in the just merged ANA code] Signed-off-by: Christoph Hellwig