kernel/linux.git/drivers/nvme/target/loop.c, branch v5.6.17

nvmet-loop: Avoid preallocating big SGL for data

2019-11-26T17:14:19+00:00

nvme_loop_create_io_queues() preallocates a big buffer for the IO SGL based on SG_CHUNK_SIZE. Modern DMA engines are often capable of dealing with very big segments so the SG_CHUNK_SIZE is often too big. SG_CHUNK_SIZE results in a static 4KB SGL allocation per command. If a controller has lots of deep queues, preallocation for the sg list can consume substantial amounts of memory. For nvmet-loop, nr_hw_queues can be 128 and each queue's depth 128. This means the resulting preallocation for the data SGL is 128*128*4K = 64MB per controller. Switch to runtime allocation for SGL for lists longer than 2 entries. This is the approach used by NVMe PCI so it should be reasonable for NVMeOF as well. Runtime SGL allocation has always been the case for the legacy I/O path so this is nothing new. Tested-by: Chaitanya Kulkarni Reviewed-by: Christoph Hellwig Reviewed-by: Chaitanya Kulkarni Reviewed-by: Max Gurtovoy Signed-off-by: Israel Rukshin Signed-off-by: Keith Busch

Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block

2019-11-25T19:15:41+00:00

Pull block driver updates from Jens Axboe: "Here are the main block driver updates for 5.5. Nothing major in here, mostly just fixes. This contains: - a set of bcache changes via Coly - MD changes from Song - loop unmap write-zeroes fix (Darrick) - spelling fixes (Geert) - zoned additions cleanups to null_blk/dm (Ajay) - allow null_blk online submit queue changes (Bart) - NVMe changes via Keith, nothing major here either" * tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits) Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()" drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET bcache: don't export symbols bcache: remove the extra cflags for request.o bcache: at least try to shrink 1 node in bch_mca_scan() bcache: add idle_max_writeback_rate sysfs interface bcache: add code comments in bch_btree_leaf_dirty() bcache: fix deadlock in bcache_allocator bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add more accurate error messages in read_super() bcache: fix static checker warning in bcache_device_free() bcache: fix a lost wake-up problem caused by mca_cannibalize_lock bcache: fix fifo index swapping condition in journal_pin_cmp() md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load null_blk: add zone open, close, and finish support dm: add zone open, close and finish support ...

nvmet: Open code nvmet_req_execute()

2019-11-04T17:56:42+00:00

Now that nvmet_req_execute does nothing, open code it. Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig [split patch, update changelog] Signed-off-by: Logan Gunthorpe Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme: move common call to nvme_cleanup_cmd to core layer

2019-11-04T17:56:41+00:00

nvme_cleanup_cmd should be called for each call to nvme_setup_cmd (symmetrical functions). Move the call for nvme_cleanup_cmd to the common core layer and call it during nvme_complete_rq for the good flow. For error flow, each transport will call nvme_cleanup_cmd independently. Also take care of a special case of path failure, where we call nvme_complete_rq without doing nvme_setup_cmd. Signed-off-by: Max Gurtovoy Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvme: introduce nvme_is_aen_req function

2019-11-04T17:56:40+00:00

This function improves code readability and reduces code duplication. Signed-off-by: Israel Rukshin Signed-off-by: Max Gurtovoy Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Signed-off-by: Jens Axboe

nvmet-loop: fix possible leakage during error flow

2019-10-15T13:47:28+00:00

During nvme_loop_queue_rq error flow, one must call nvme_cleanup_cmd since it's symmetric to nvme_setup_cmd. Signed-off-by: Max Gurtovoy Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch

Merge tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block

2019-09-17T23:57:47+00:00

Pull block updates from Jens Axboe: - Two NVMe pull requests: - ana log parse fix from Anton - nvme quirks support for Apple devices from Ben - fix missing bio completion tracing for multipath stack devices from Hannes and Mikhail - IP TOS settings for nvme rdma and tcp transports from Israel - rq_dma_dir cleanups from Israel - tracing for Get LBA Status command from Minwoo - Some nvme-tcp cleanups from Minwoo, Potnuri and Myself - Some consolidation between the fabrics transports for handling the CAP register - reset race with ns scanning fix for fabrics (move fabrics commands to a dedicated request queue with a different lifetime from the admin request queue)." - controller reset and namespace scan races fixes - nvme discovery log change uevent support - naming improvements from Keith - multiple discovery controllers reject fix from James - some regular cleanups from various people - Series fixing (and re-fixing) null_blk debug printing and nr_devices checks (André) - A few pull requests from Song, with fixes from Andy, Guoqing, Guilherme, Neil, Nigel, and Yufen. - REQ_OP_ZONE_RESET_ALL support (Chaitanya) - Bio merge handling unification (Christoph) - Pick default elevator correctly for devices with special needs (Damien) - Block stats fixes (Hou) - Timeout and support devices nbd fixes (Mike) - Series fixing races around elevator switching and device add/remove (Ming) - sed-opal cleanups (Revanth) - Per device weight support for BFQ (Fam) - Support for blk-iocost, a new model that can properly account cost of IO workloads. (Tejun) - blk-cgroup writeback fixes (Tejun) - paride queue init fixes (zhengbin) - blk_set_runtime_active() cleanup (Stanley) - Block segment mapping optimizations (Bart) - lightnvm fixes (Hans/Minwoo/YueHaibing) - Various little fixes and cleanups * tag 'for-5.4/block-2019-09-16' of git://git.kernel.dk/linux-block: (186 commits) null_blk: format pr_* logs with pr_fmt null_blk: match the type of parameter nr_devices null_blk: do not fail the module load with zero devices block: also check RQF_STATS in blk_mq_need_time_stamp() block: make rq sector size accessible for block stats bfq: Fix bfq linkage error raid5: use bio_end_sector in r5_next_bio raid5: remove STRIPE_OPS_REQ_PENDING md: add feature flag MD_FEATURE_RAID0_LAYOUT md/raid0: avoid RAID0 data corruption due to layout confusion. raid5: don't set STRIPE_HANDLE to stripe which is in batch list raid5: don't increment read_errors on EILSEQ return nvmet: fix a wrong error status returned in error log page nvme: send discovery log page change events to userspace nvme: add uevent variables for controller devices nvme: enable aen regardless of the presence of I/O queues nvme-fabrics: allow discovery subsystems accept a kato nvmet: Use PTR_ERR_OR_ZERO() in nvmet_init_discovery() nvme: Remove redundant assignment of cq vector nvme: Assign subsys instance from first ctrl ...

nvme: make fabrics command run on a separate request queue

2019-08-29T19:55:03+00:00

We have a fundamental issue that fabric commands use the admin_q. The reason is, that admin-connect, register reads and writes and admin commands cannot be guaranteed ordering while we are running controller resets. For example, when we reset a controller we perform: 1. disable the controller 2. teardown the admin queue 3. re-establish the admin queue 4. enable the controller In order to perform (3), we need to unquiesce the admin queue, however we may have some admin commands that are already pending on the quiesced admin_q and will immediate execute when we unquiesce it before we execute (4). The host must not send admin commands to the controller before enabling the controller. To fix this, we have the fabric commands (admin connect and property get/set, but not I/O queue connect) use a separate fabrics_q and make sure to quiesce the admin_q before we disable the controller, and unquiesce it only after we enable the controller. This fixes the error prints from nvmet in a controller reset storm test: kernel: nvmet: got cmd 6 while CC.EN == 0 on qid = 0 Which indicate that the host is sending an admin command when the controller is not enabled. Reviewed-by: James Smart Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg

nvme: move sqsize setting to the core

2019-08-29T19:55:00+00:00

nvme_enable_ctrl reads the cap register right after, so no need to do that locally in the transport driver. Have sqsize setting in nvme_init_identify. Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg

nvme: wait until all completed request's complete fn is called

2019-08-05T03:41:29+00:00

When aborting in-flight request for recovering controller, we have to make sure that queue's complete function is called on completed request before moving on. Otherwise, for example, the warning of WARN_ON_ONCE(qp->mrs_used > 0) in ib_destroy_qp_user() may be triggered on nvme-rdma. Fix this issue by using blk_mq_tagset_wait_completed_request. Cc: Max Gurtovoy Cc: Sagi Grimberg Cc: Keith Busch Cc: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Ming Lei Signed-off-by: Jens Axboe