kernel/linux.git/drivers/nvme/target/core.c, branch v5.16

nvmet: register discovery subsystem as 'current'

2021-10-27T06:06:04+00:00

Register the discovery subsystem as the 'current' discovery subsystem, and add a new discovery log page entry for it. Signed-off-by: Hannes Reinecke Signed-off-by: Christoph Hellwig

nvmet: add nvmet_is_disc_subsys() helper

2021-10-20T17:16:02+00:00

Add a helper function to determine if a given subsystem is a discovery subsystem. Signed-off-by: Hannes Reinecke Reviewed-by: Chaitanya Kulkarni Reviewed-by: Himanshu Madhani Signed-off-by: Christoph Hellwig

nvmet: make discovery NQN configurable

2021-10-20T17:16:01+00:00

TPAR8013 allows for unique discovery NQNs, so make the discovery controller NQN configurable by exposing a subsys attribute 'discovery_nqn'. Signed-off-by: Hannes Reinecke Reviewed-by: Chaitanya Kulkarni Reviewed-by: Himanshu Madhani Signed-off-by: Christoph Hellwig

nvmet: add get_max_queue_size op for controllers

2021-10-20T17:16:01+00:00

Some transports, such as RDMA, would like to set the queue size according to device/port/ctrl characteristics. Add a new nvmet transport op that is called during ctrl initialization. This will not effect transports that don't implement this option. Reviewed-by: Chaitanya Kulkarni Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig

nvmet: return bool from nvmet_passthru_ctrl and nvmet_is_passthru_req

2021-09-06T07:59:03+00:00

The target core code never needs the host-side nvme_ctrl structure. Open code two uses of nvmet_is_passthru_req in passthru.c, and then switch the helpers used by the core to return bool. Also rename the fuctions to better match their usage: nvmet_passthru_ctrl -> nvmet_is_passthru_subsys nvmet_req_passthru_ctrl -> nvmet_is_passthru_req Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg

nvmet: looks at the passthrough controller when initializing CAP

2021-09-06T07:59:03+00:00

For a passthru controller make cap initialization dependent on the cap of the passthru controller, given that multiple Command Set support needs to be supported by the underlying controller. For that move the initialization of CAP later so that it can use the fully initialized nvmet_ctrl structure. Fixes: ab5d0b38c047 (nvmet: add Command Set Identifier support) Signed-off-by: Adam Manzanares Reviewed-by: Keith Busch [hch: refactored the code a bit to keep it more contained in passthru.c] Signed-off-by: Christoph Hellwig

nvmet: avoid duplicate qid in connect cmd

2021-08-16T12:42:25+00:00

According to the NVMe specification, if the host sends a Connect command specifying a queue id which has already been created, a status value of NVME_SC_CMD_SEQ_ERROR is returned. Signed-off-by: Amit Engel Signed-off-by: Christoph Hellwig

Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block

2021-06-30T19:21:16+00:00

Pull block driver updates from Jens Axboe: "Pretty calm round, mostly just NVMe and a bit of MD: - NVMe updates (via Christoph) - improve the APST configuration algorithm (Alexey Bogoslavsky) - look for StorageD3Enable on companion ACPI device (Mario Limonciello) - allow selecting the network interface for TCP connections (Martin Belanger) - misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King, Christoph) - move the ACPI StorageD3 code to drivers/acpi/ and add quirks for certain AMD CPUs (Mario Limonciello) - zoned device support for nvmet (Chaitanya Kulkarni) - fix the rules for changing the serial number in nvmet (Noam Gottlieb) - various small fixes and cleanups (Dan Carpenter, JK Kim, Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert Uytterhoeven, Daniel Wagner) - MD updates (Via Song) - iostats rewrite (Guoqing Jiang) - raid5 lock contention optimization (Gal Ofri) - Fall through warning fix (Gustavo) - Misc fixes (Gustavo, Jiapeng)" * tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits) nvmet: use NVMET_MAX_NAMESPACES to set nn value loop: Fix missing discard support when using LOOP_CONFIGURE nvme.h: add missing nvme_lba_range_type endianness annotations nvme: remove zeroout memset call for struct nvme-pci: remove zeroout memset call for struct nvmet: remove zeroout memset call for struct nvmet: add ZBD over ZNS backend support nvmet: add Command Set Identifier support nvmet: add nvmet_req_bio put helper for backends nvmet: add req cns error complete helper block: export blk_next_bio() nvmet: remove local variable nvmet: use nvme status value directly nvmet: use u32 type for the local variable nsid nvmet: use u32 for nvmet_subsys max_nsid nvmet: use req->cmd directly in file-ns fast path nvmet: use req->cmd directly in bdev-ns fast path nvmet: make ver stable once connection established nvmet: allow mn change if subsys not discovered nvmet: make sn stable once connection was established ...

nvmet: add ZBD over ZNS backend support

2021-06-17T13:51:21+00:00

NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to communicate with a non-volatile memory subsystem using zones for NVMe protocol-based controllers. NVMeOF already support the ZNS NVMe Protocol compliant devices on the target in the passthru mode. There are generic zoned block devices like Shingled Magnetic Recording (SMR) HDDs that are not based on the NVMe protocol. This patch adds ZNS backend support for non-ZNS zoned block devices as NVMeOF targets. This support includes implementing the new command set NVME_CSI_ZNS, adding different command handlers for ZNS command set such as NVMe Identify Controller, NVMe Identify Namespace, NVMe Zone Append, NVMe Zone Management Send and NVMe Zone Management Receive. With the new command set identifier, we also update the target command effects logs to reflect the ZNS compliant commands. Signed-off-by: Chaitanya Kulkarni Reviewed-by: Damien Le Moal Signed-off-by: Christoph Hellwig

nvmet: add Command Set Identifier support

2021-06-17T13:51:20+00:00

NVMe TP 4056 allows controllers to support different command sets. NVMeoF target currently only supports namespaces that contain traditional logical blocks that may be randomly read and written. In some applications there is a value in exposing namespaces that contain logical blocks that have special access rules (e.g. sequentially write required namespace such as Zoned Namespace (ZNS)). In order to support the Zoned Block Devices (ZBD) backend, controllers need to have support for ZNS Command Set Identifier (CSI). In this preparation patch, we adjust the code such that it can now support the default command set identifier. We update the namespace data structure to store the CSI value which defaults to NVME_CSI_NVM that represents traditional logical blocks namespace type. The CSI support is required to implement the ZBD backend for NVMeOF with host side NVMe ZNS interface, since ZNS commands belong to the different command set than the default one. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig