kernel/linux.git/drivers/nvme/host, branch v4.19.77

nvme-multipath: fix ana log nsid lookup when nsid is not found

2019-10-05T11:09:52+00:00

[ Upstream commit e01f91dff91c7b16a6e3faf2565017d497a73f83 ] ANA log parsing invokes nvme_update_ana_state() per ANA group desc. This updates the state of namespaces with nsids in desc->nsids[]. Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid. Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces: - if current namespace matches the current desc->nsids[n], this namespace is updated, and n is incremented. - the process stops when it encounters the end of either ctrl->namespaces end or desc->nsids[] In case desc->nsids[n] does not match any of ctrl->namespaces, the remaining nsids following desc->nsids[n] will not be updated. Such situation was considered abnormal and generated WARN_ON_ONCE. However ANA log MAY contain nsids not (yet) found in ctrl->namespaces. For example, lets consider the following scenario: - nvme0 exposes namespaces with nsids = [2, 3] to the host - a new namespace nsid = 1 is added dynamically - also, a ANA topology change is triggered - NS_CHANGED aen is generated and triggers scan_work - before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA aen was issues and ana_work receives ANA log with nsids=[1, 2, 3] Result: ana_work fails to update ANA state on existing namespaces [2, 3] Solution: Change the way nvme_update_ana_state() namespace list walk checks the current namespace against desc->nsids[n] as follows: a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces. b) ns->head->ns_id == desc->nsids[n]: match, update the namespace c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1] This enables correct operation in the scenario described above. This also allows ANA log to contain nsids currently invisible to the host, i.e. inactive nsids. Signed-off-by: Anton Eidelman Reviewed-by: James Smart Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin

nvme-fc: use separate work queue to avoid warning

2019-09-16T06:21:44+00:00

[ Upstream commit 8730c1ddb69bdeeb10c1f613a4e15e95862b1981 ] When tearing down a controller the following warning is issued: WARNING: CPU: 0 PID: 30681 at ../kernel/workqueue.c:2418 check_flush_dependency This happens as the err_work workqueue item is scheduled on the system workqueue (which has WQ_MEM_RECLAIM not set), but is flushed from a workqueue which has WQ_MEM_RECLAIM set. Fix this by providing an FC-NVMe specific workqueue. Fixes: 4cff280a5fcc ("nvme-fc: resolve io failures during connect") Signed-off-by: Hannes Reinecke Reviewed-by: James Smart Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-multipath: fix possible I/O hang when paths are updated

2019-09-10T09:33:50+00:00

[ Upstream commit 504db087aaccdb32af61539916409f7dca31ceb5 ] nvme_state_set_live() making a path available triggers requeue_work in order to resubmit requests that ended up on requeue_list when no paths were available. This requeue_work may race with concurrent nvme_ns_head_make_request() that do not observe the live path yet. Such concurrent requests may by made by either: - New IO submission. - Requeue_work triggered by nvme_failover_req() or another ana_work. A race may cause requeue_work capture the state of requeue_list before more requests get onto the list. These requests will stay on the list forever unless requeue_work is triggered again. In order to prevent such race, nvme_state_set_live() should synchronize_srcu(&head->srcu) before triggering the requeue_work and prevent nvme_ns_head_make_request referencing an old snapshot of the path list. Reviewed-by: Christoph Hellwig Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

nvme-pci: Fix async probe remove race

2019-09-06T08:21:55+00:00

[ Upstream commit bd46a90634302bfe791e93ad5496f98f165f7ae0 ] Ensure the controller is not in the NEW state when nvme_probe() exits. This will always allow a subsequent nvme_remove() to set the state to DELETING, fixing a potential race between the initial asynchronous probe and device removal. Reported-by: Li Zhong Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin

nvme: fix a possible deadlock when passthru commands sent to a multipath device

2019-09-06T08:21:55+00:00

[ Upstream commit b9156daeb1601d69007b7e50efcf89d69d72ec1d ] When the user issues a command with side effects, we will end up freezing the namespace request queue when updating disk info (and the same for the corresponding mpath disk node). However, we are not freezing the mpath node request queue, which means that mpath I/O can still come in and block on blk_queue_enter (called from nvme_ns_head_make_request -> direct_make_request). This is a deadlock, because blk_queue_enter will block until the inner namespace request queue is unfroze, but that process is blocked because the namespace revalidation is trying to update the mpath disk info and freeze its request queue (which will never complete because of the I/O that is blocked on blk_queue_enter). Fix this by freezing all the subsystem nsheads request queues before executing the passthru command. Given that these commands are infrequent we should not worry about this temporary I/O freeze to keep things sane. Here is the matching hang traces: -- [ 374.465002] INFO: task systemd-udevd:17994 blocked for more than 122 seconds. [ 374.472975] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.478522] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.487274] systemd-udevd D 0 17994 1 0x00000000 [ 374.493407] Call Trace: [ 374.496145] __schedule+0x2ef/0x620 [ 374.500047] schedule+0x38/0xa0 [ 374.503569] blk_queue_enter+0x139/0x220 [ 374.507959] ? remove_wait_queue+0x60/0x60 [ 374.512540] direct_make_request+0x60/0x130 [ 374.517219] nvme_ns_head_make_request+0x11d/0x420 [nvme_core] [ 374.523740] ? generic_make_request_checks+0x307/0x6f0 [ 374.529484] generic_make_request+0x10d/0x2e0 [ 374.534356] submit_bio+0x75/0x140 [ 374.538163] ? guard_bio_eod+0x32/0xe0 [ 374.542361] submit_bh_wbc+0x171/0x1b0 [ 374.546553] block_read_full_page+0x1ed/0x330 [ 374.551426] ? check_disk_change+0x70/0x70 [ 374.556008] ? scan_shadow_nodes+0x30/0x30 [ 374.560588] blkdev_readpage+0x18/0x20 [ 374.564783] do_read_cache_page+0x301/0x860 [ 374.569463] ? blkdev_writepages+0x10/0x10 [ 374.574037] ? prep_new_page+0x88/0x130 [ 374.578329] ? get_page_from_freelist+0xa2f/0x1280 [ 374.583688] ? __alloc_pages_nodemask+0x179/0x320 [ 374.588947] read_cache_page+0x12/0x20 [ 374.593142] read_dev_sector+0x2d/0xd0 [ 374.597337] read_lba+0x104/0x1f0 [ 374.601046] find_valid_gpt+0xfa/0x720 [ 374.605243] ? string_nocheck+0x58/0x70 [ 374.609534] ? find_valid_gpt+0x720/0x720 [ 374.614016] efi_partition+0x89/0x430 [ 374.618113] ? string+0x48/0x60 [ 374.621632] ? snprintf+0x49/0x70 [ 374.625339] ? find_valid_gpt+0x720/0x720 [ 374.629828] check_partition+0x116/0x210 [ 374.634214] rescan_partitions+0xb6/0x360 [ 374.638699] __blkdev_reread_part+0x64/0x70 [ 374.643377] blkdev_reread_part+0x23/0x40 [ 374.647860] blkdev_ioctl+0x48c/0x990 [ 374.651956] block_ioctl+0x41/0x50 [ 374.655766] do_vfs_ioctl+0xa7/0x600 [ 374.659766] ? locks_lock_inode_wait+0xb1/0x150 [ 374.664832] ksys_ioctl+0x67/0x90 [ 374.668539] __x64_sys_ioctl+0x1a/0x20 [ 374.672732] do_syscall_64+0x5a/0x1c0 [ 374.676828] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 374.738474] INFO: task nvmeadm:49141 blocked for more than 123 seconds. [ 374.745871] Not tainted 5.2.0-rc3-mpdebug+ #42 [ 374.751419] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 374.760170] nvmeadm D 0 49141 36333 0x00004080 [ 374.766301] Call Trace: [ 374.769038] __schedule+0x2ef/0x620 [ 374.772939] schedule+0x38/0xa0 [ 374.776452] blk_mq_freeze_queue_wait+0x59/0x100 [ 374.781614] ? remove_wait_queue+0x60/0x60 [ 374.786192] blk_mq_freeze_queue+0x1a/0x20 [ 374.790773] nvme_update_disk_info.isra.57+0x5f/0x350 [nvme_core] [ 374.797582] ? nvme_identify_ns.isra.50+0x71/0xc0 [nvme_core] [ 374.804006] __nvme_revalidate_disk+0xe5/0x110 [nvme_core] [ 374.810139] nvme_revalidate_disk+0xa6/0x120 [nvme_core] [ 374.816078] ? nvme_submit_user_cmd+0x11e/0x320 [nvme_core] [ 374.822299] nvme_user_cmd+0x264/0x370 [nvme_core] [ 374.827661] nvme_dev_ioctl+0x112/0x1d0 [nvme_core] [ 374.833114] do_vfs_ioctl+0xa7/0x600 [ 374.837117] ? __audit_syscall_entry+0xdd/0x130 [ 374.842184] ksys_ioctl+0x67/0x90 [ 374.845891] __x64_sys_ioctl+0x1a/0x20 [ 374.850082] do_syscall_64+0x5a/0x1c0 [ 374.854178] entry_SYSCALL_64_after_hwframe+0x44/0xa9 -- Reported-by: James Puthukattukaran Tested-by: James Puthukattukaran Reviewed-by: Keith Busch Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin

nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns

2019-09-06T08:21:54+00:00

[ Upstream commit fab7772bfbcfe8fb8e3e352a6a8fcaf044cded17 ] When CONFIG_NVME_MULTIPATH is set, only the hidden gendisk associated with the per-controller ns is run through revalidate_disk when a rescan is triggered, while the visible blockdev never gets its size (bdev->bd_inode->i_size) updated to reflect any capacity changes that may have occurred. This prevents online resizing of nvme block devices and in extension of any filesystems atop that will are unable to expand while mounted, as userspace relies on the blockdev size for obtaining the disk capacity (via BLKGETSIZE/64 ioctls). Fix this by explicitly revalidating the actual namespace gendisk in addition to the per-controller gendisk, when multipath is enabled. Signed-off-by: Anthony Iliopoulos Reviewed-by: Sagi Grimberg Reviewed-by: Johannes Thumshirn Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme: fix multipath crash when ANA is deactivated

2019-08-16T08:12:48+00:00

[ Upstream commit 66b20ac0a1a10769d059d6903202f53494e3d902 ] Fix a crash with multipath activated. It happends when ANA log page is larger than MDTS and because of that ANA is disabled. The driver then tries to access unallocated buffer when connecting to a nvme target. The signature is as follows: [ 300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192). [ 300.435387] nvme nvme0: disabling ANA support. [ 300.437835] nvme nvme0: creating 4 I/O queues. [ 300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009 [ 300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 300.466342] #PF error: [normal kernel read fault] [ 300.467385] PGD 0 P4D 0 [ 300.467987] Oops: 0000 [#1] SMP PTI [ 300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4 [ 300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core] [ 300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.486626] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.488538] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.494991] Call Trace: [ 300.495645] nvme_mpath_add_disk+0x5c/0xb0 [nvme_core] [ 300.496880] nvme_validate_ns+0x2ef/0x550 [nvme_core] [ 300.498105] ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core] [ 300.499539] nvme_scan_work+0x2b4/0x370 [nvme_core] [ 300.500717] ? __switch_to_asm+0x35/0x70 [ 300.501663] process_one_work+0x171/0x380 [ 300.502340] worker_thread+0x49/0x3f0 [ 300.503079] kthread+0xf8/0x130 [ 300.503795] ? max_active_store+0x80/0x80 [ 300.504690] ? kthread_bind+0x10/0x10 [ 300.505502] ret_from_fork+0x35/0x40 [ 300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio [ 300.514984] CR2: 0000000000000008 [ 300.515569] ---[ end trace faa2eefad7e7f218 ]--- [ 300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core] [ 300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48 [ 300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296 [ 300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000 [ 300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258 [ 300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 [ 300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0 [ 300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0 [ 300.527084] FS: 0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000 [ 300.528396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0 [ 300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 300.533264] Kernel panic - not syncing: Fatal exception [ 300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]--- Condition check refactoring from Christoph Hellwig. Signed-off-by: Marta Rybczynska Tested-by: Jean-Baptiste Riaux Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-pci: set the errno on ctrl state change error

2019-07-26T07:14:09+00:00

[ Upstream commit e71afda49335620e3d9adf56015676db33a3bd86 ] This patch removes the confusing assignment of the variable result at the time of declaration and sets the value in error cases next to the places where the actual error is happening. Here we also set the result value to -ENODEV when we fail at the final ctrl state transition in nvme_reset_work(). Without this assignment result will hold 0 from nvme_setup_io_queue() and on failure 0 will be passed to he nvme_remove_dead_ctrl() from final state transition. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme-pci: properly report state change failure in nvme_reset_work

2019-07-26T07:14:09+00:00

[ Upstream commit cee6c269b016ba89c62e34d6bccb103ee2c7de4f ] If the state change to NVME_CTRL_CONNECTING fails, the dmesg is going to be like: [ 293.689160] nvme nvme0: failed to mark controller CONNECTING [ 293.689160] nvme nvme0: Removing after probe failure status: 0 Even it prints the first line to indicate the situation, the second line is not proper because the status is 0 which means normally success of the previous operation. This patch makes it indicate the proper error value when it fails. [ 25.932367] nvme nvme0: failed to mark controller CONNECTING [ 25.932369] nvme nvme0: Removing after probe failure status: -16 This situation is able to be easily reproduced by: root@target:~# rmmod nvme && modprobe nvme && rmmod nvme Signed-off-by: Minwoo Im Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin

nvme: fix possible io failures when removing multipathed ns

2019-07-26T07:14:09+00:00

[ Upstream commit 2181e455612a8db2761eabbf126640552a451e96 ] When a shared namespace is removed, we call blk_cleanup_queue() when the device can still be accessed as the current path and this can result in submission to a dying queue. Hence, direct_make_request() called by our mpath device may fail (propagating the failure to userspace). Instead, we want to failover this I/O to a different path if one exists. Thus, before we cleanup the request queue, we make sure that the device is cleared from the current path nor it can be selected again as such. Fix this by: - clear the ns from the head->list and synchronize rcu to make sure there is no concurrent path search that restores it as the current path - clear the mpath current path in order to trigger a subsequent path search and sync srcu to wait for any ongoing request submissions - safely continue to namespace removal and blk_cleanup_queue Signed-off-by: Anton Eidelman Signed-off-by: Sagi Grimberg Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin