kernel/linux.git/drivers/nvme/host/multipath.c, branch v5.16

nvme-multipath: set ana_log_size to 0 after free ana_log_buf

2021-12-07T17:19:28+00:00

Set ana_log_size to 0 when ana_log_buf is freed to make sure nvme_mpath_init_identify will do the right thing when retrying after an earlier failure. Signed-off-by: Hou Tao Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig

nvmet: use flex_array_size and struct_size

2021-10-27T06:06:41+00:00

In an effort to avoid open-coded arithmetic in the kernel [1], use the flex_array_size() and struct_size() helpers instead of an open-coded calculation. [1] https://github.com/KSPP/linux/issues/160 Signed-off-by: Len Baker Reviewed-by: Sagi Grimberg Reviewed-by: Gustavo A. R. Silva Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig

nvme: drop scan_lock and always kick requeue list when removing namespaces

2021-10-20T17:23:30+00:00

When reading the partition table on initial scan hits an I/O error the I/O will hang with the scan_mutex held: [<0>] do_read_cache_page+0x49b/0x790 [<0>] read_part_sector+0x39/0xe0 [<0>] read_lba+0xf9/0x1d0 [<0>] efi_partition+0xf1/0x7f0 [<0>] bdev_disk_changed+0x1ee/0x550 [<0>] blkdev_get_whole+0x81/0x90 [<0>] blkdev_get_by_dev+0x128/0x2e0 [<0>] device_add_disk+0x377/0x3c0 [<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core] [<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core] [<0>] nvme_alloc_ns+0x417/0x950 [nvme_core] [<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core] [<0>] nvme_scan_work+0x168/0x310 [nvme_core] [<0>] process_one_work+0x231/0x420 and trying to delete the controller will deadlock as it tries to grab the scan mutex: [<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core] [<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core] [<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core] As we're now properly ordering the namespace list there is no need to hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore. And we always need to kick the requeue list as the path will be marked as unusable and I/O will be requeued _without_ a current path. Signed-off-by: Hannes Reinecke Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig

nvme-multipath: add error handling support for add_disk()

2021-10-20T17:16:03+00:00

We never checked for errors on add_disk() as this function returned void. Now that this is fixed, use the shiny new error handling. Since we now can tell for sure when a disk was added, move setting the bit NVME_NSHEAD_DISK_LIVE only when we did add the disk successfully. Nothing to do here as the cleanup is done elsewhere. We take care and use test_and_set_bit() because it is protects against two nvme paths simultaneously calling device_add_disk() on the same namespace head. Signed-off-by: Luis Chamberlain Reviewed-by: Keith Busch Signed-off-by: Christoph Hellwig

nvme: generate uevent once a multipath namespace is operational again

2021-10-20T17:16:00+00:00

When fast_io_fail_tmo is set I/O will be aborted while recovery is still ongoing. This causes MD to set the namespace to failed, and no futher I/O will be submitted to that namespace. However, once the recovery succeeds and the namespace becomes operational again the NVMe subsystem doesn't send a notification, so MD cannot automatically reinstate operation and requires manual interaction. This patch will send a KOBJ_CHANGE uevent per multipathed namespace once the underlying controller transitions to LIVE, allowing an automatic MD reassembly with these udev rules: /etc/udev/rules.d/65-md-auto-re-add.rules: SUBSYSTEM!="block", GOTO="md_end" ACTION!="change", GOTO="md_end" ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end" PROGRAM="/sbin/md_raid_auto_readd.sh $devnode" LABEL="md_end" /sbin/md_raid_auto_readd.sh: MDADM=/sbin/mdadm DEVNAME=$1 export $(${MDADM} --examine --export ${DEVNAME}) if [ -z "${MD_UUID}" ]; then exit 1 fi UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID}) MD_DEVNAME=${UUID_LINK##*/} export $(${MDADM} --detail --export /dev/${MD_DEVNAME}) if [ -z "${MD_METADATA}" ] ; then exit 1 fi if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then echo "${MD_DEVNAME}: array not degraded, nothing to do" exit 0 fi MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state) if [ ${MD_STATE} != "clean" ] ; then echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add" exit 1 fi MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE" if [ ${!MD_VARNAME} = "spare" ] ; then ${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME} fi Changes to v2: - Add udev rules example to description Changes to v1: - use disk_uevent() as suggested by hch Signed-off-by: Hannes Reinecke Signed-off-by: Christoph Hellwig

nvme-multipath: enable polled I/O

2021-10-18T12:17:36+00:00

Set the poll queue flag to enable polling, given that the multipath node just dispatches the bios to a lower queue. Signed-off-by: Christoph Hellwig Tested-by: Mark Wunderlich Link: https://lore.kernel.org/r/20211012111226.760968-17-hch@lst.de Signed-off-by: Jens Axboe

block: switch polling to be bio based

2021-10-18T12:17:36+00:00

Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig Tested-by: Mark Wunderlich Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe

nvme: fix per-namespace chardev deletion

2021-10-14T06:07:47+00:00

Decrease reference count of chardevice during char device deletion in order to fix a memory leak. Add a release callabck for the device associated chardev and move ida_simple_remove into the release function. Fixes: 2637baed7801 ("nvme: introduce generic per-namespace chardev") Reported-by: Yi Zhang Suggested-by: Sagi Grimberg Signed-off-by: Adam Manzanares Reviewed-by: Javier GonzÃ¡lez Tested-by: Yi Zhang Signed-off-by: Christoph Hellwig

nvme-multipath: fix ANA state updates when a namespace is not present

2021-09-14T08:32:04+00:00

nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by: Anton Eidelman Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg

nvme-multipath: revalidate paths during rescan

2021-09-06T07:59:02+00:00

When triggering a rescan due to a namespace resize we will be receiving AENs on every controller, triggering a rescan of all attached namespaces. If multipath is active only the current path and the ns_head disk will be updated, the other paths will still refer to the old size until AENs for the remaining controllers are received. If I/O comes in before that it might be routed to one of the old paths, triggering an I/O failure with 'access beyond end of device'. With this patch the old paths are skipped from multipath path selection until the controller serving these paths has been rescanned. Signed-off-by: Hannes Reinecke [dwagner: - introduce NVME_NS_READY flag instead of NVME_NS_INVALIDATE - use 'revalidate' instead of 'invalidate' which follows the zoned device code path. - clear NVME_NS_READY before clearing current_path] Signed-off-by: Daniel Wagner Signed-off-by: Christoph Hellwig