kernel/linux.git/drivers/nvme/host/apple.c, branch linux-7.0.y

nvme-apple: Reset q->sq_tail during queue init

2026-05-23T11:09:38+00:00

commit a6ab75639e23169a741b0b2e12191fd8acb32c73 upstream. Fixes a "duplicate tag error for tag 0" firmware crash during controller reset while setting up a queue on Apple A11 / T8015 caused by stale entries in the submission queue due to an invalid sq_tail offset after reset. Fixes: 04d8ecf37b5e ("nvme: apple: Add Apple A11 support") Cc: stable@vger.kernel.org Suggested-by: Yuriy Havrylyuk Reviewed-by: Sven Peter Signed-off-by: Nick Chan Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvme-apple: drop invalid put of admin queue reference count

2026-05-14T13:31:14+00:00

commit ba9d308ccd6732dd97ed8080d834a4a89e758e14 upstream. Commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") moved the admin queue reference ->put call into nvme_free_ctrl() - a controller device release callback performed for every nvme driver doing nvme_init_ctrl(). nvme-apple sets refcount of the admin queue to 1 at allocation during the probe function and then puts it twice now: nvme_free_ctrl() blk_put_queue(ctrl->admin_q) // #1 ->free_ctrl() apple_nvme_free_ctrl() blk_put_queue(anv->ctrl.admin_q) // #2 Note that there is a commit 941f7298c70c ("nvme-apple: remove an extra queue reference") which intended to drop taking an extra admin queue reference. Looks like at that moment it accidentally fixed a refcount leak, which existed since the driver's introduction. There were two ->get calls at driver's probe function and a single ->put inside apple_nvme_free_ctrl(). However now after commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") the refcount is imbalanced again. Fix it by removing extra ->put call from apple_nvme_free_ctrl(). anv->dev and ctrl->dev point to the same device, so use ctrl->dev directly for simplification. Compile tested only. Found by Linux Verification Center (linuxtesting.org). Fixes: 03b3bcd319b3 ("nvme: fix admin request_queue lifetime") Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig Signed-off-by: Fedor Pchelkin Signed-off-by: Keith Busch Signed-off-by: Greg Kroah-Hartman

nvme-apple: add "apple,t8103-nvme-ans2" as compatible

2026-01-09T14:55:09+00:00

After discussion with the devicetree maintainers we agreed to not extend lists with the generic compatible "apple,nvme-ans2" anymore [1]. Add "apple,t8103-nvme-ans2" as fallback compatible as it is the SoC the driver and bindings were written for. [1]: https://lore.kernel.org/asahi/12ab93b7-1fc2-4ce0-926e-c8141cfe81bf@kernel.org/ Cc: stable@vger.kernel.org # v6.18+ Fixes: 5bd2927aceba ("nvme-apple: Add initial Apple SoC NVMe driver") Reviewed-by: Neal Gompa Reviewed-by: Christoph Hellwig Signed-off-by: Janne Grunau Signed-off-by: Keith Busch

nvme: remove virtual boundary for sgl capable devices

2025-11-07T01:11:58+00:00

The nvme virtual boundary is only required for the PRP format. Devices that can use SGL for DMA don't need it for IO queues. Drop reporting it for such devices; rdma fabrics controllers will continue to use the limit as they currently don't report any boundary requirements, but tcp and fc never needed it in the first place so they get to report no virtual boundary. Applications may continue to align to the same virtual boundaries for optimization purposes if they want, and the driver will continue to decide whether to use the PRP format the same as before if the IO allows it. Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe

nvme: apple: Add Apple A11 support

2025-09-06T08:04:32+00:00

Add support for ANS2 NVMe on Apple A11 SoC. This version of ANS2 is less quirky than the one in M1, and does not have NVMMU or Linear SQ. However, it still requires a non-standard 128-byte SQE. Acked-by: Christoph Hellwig Signed-off-by: Nick Chan Reviewed-by: Sven Peter Link: https://lore.kernel.org/r/20250826-t8015-nvme-v5-2-caee6ab00144@gmail.com Signed-off-by: Sven Peter

nvme: fix multiple spelling and grammar issues in host drivers

2025-07-17T11:38:06+00:00

This commit fixes several typos and grammatical issues across various nvme host driver files: - correct "glace" to "glance" in a comment in apple.c - fix "Idependent" to "Independent" in core.c - change "unsucceesful" to "unsuccessful", "they blk-mq" to "the blk-mq", - fix "terminaed" to "terminated" and other grammar in fc.c - update "O's" to "0's" to clarify meaning in nvme.h - fix a function name reference in a comment in zns.c: *_transter_len() -> *_transfer_len(). - fix sysfs_emit() output format in pci.c (replace x%08x with 0x%08x) These changes improve the code readability and documentation consistency across the NVMe driver. Signed-off-by: Alok Tiwari Reviewed-by: Randy Dunlap Reviewed-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig

Merge tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-03-27T16:05:55+00:00

Pull SoC driver updates from Arnd Bergmann: "These are the updates for SoC specific drivers and related subsystems: - Firmware driver updates for SCMI, FF-A and SMCCC firmware interfaces, adding support for additional firmware features including SoC identification and FF-A SRI callbacks as well as various bugfixes - Memory controller updates for Nvidia and Mediatek - Reset controller support for microchip sam9x7 and imx8qxp/imx8qm - New hardware support for multiple Mediatek, Renesas and Samsung Exynos chips - Minor updates on Zynq, Qualcomm, Amlogic, TI, Samsung, Nvidia and Apple chips There will be a follow up with a few more driver updates that are still causing build regressions at the moment" * tag 'soc-drivers-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (97 commits) irqchip: Add support for Amlogic A4 and A5 SoCs dt-bindings: interrupt-controller: Add support for Amlogic A4 and A5 SoCs reset: imx: fix incorrect module device table dt-bindings: power: qcom,kpss-acc-v2: add qcom,msm8916-acc compatible bus: qcom-ssc-block-bus: Fix the error handling path of qcom_ssc_block_bus_probe() bus: qcom-ssc-block-bus: Remove some duplicated iounmap() calls soc: qcom: pd-mapper: Add support for SDM630/636 reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM dt-bindings: firmware: imx: add property reset-controller dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 memory: mtk-smi: Add ostd setting for mt8192 dt-bindings: soc: samsung: exynos-usi: Drop unnecessary status from example firmware: tegra: bpmp: Fix typo in bpmp-abi.h soc/tegra: pmc: Use str_enable_disable-like helpers soc: samsung: include linux/array_size.h where needed firmware: arm_scmi: use ioread64() instead of ioread64_hi_lo() soc: mediatek: mtk-socinfo: Add extra entry for MT8395AV/ZA Genio 1200 soc: mediatek: mt8188-mmsys: Add support for DSC on VDO0 soc: mediatek: mmsys: Migrate all tables to MMSYS_ROUTE() macro soc: mediatek: mt8365-mmsys: Fix routing table masks and values ...

Merge tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux

2025-03-27T01:08:55+00:00

Pull block updates from Jens Axboe: - Fixes for integrity handling - NVMe pull request via Keith: - Secure concatenation for TCP transport (Hannes) - Multipath sysfs visibility (Nilay) - Various cleanups (Qasim, Baruch, Wang, Chen, Mike, Damien, Li) - Correct use of 64-bit BARs for pci-epf target (Niklas) - Socket fix for selinux when used in containers (Peijie) - MD pull request via Yu: - fix recovery can preempt resync (Li Nan) - fix md-bitmap IO limit (Su Yue) - fix raid10 discard with REQ_NOWAIT (Xiao Ni) - fix raid1 memory leak (Zheng Qixing) - fix mddev uaf (Yu Kuai) - fix raid1,raid10 IO flags (Yu Kuai) - some refactor and cleanup (Yu Kuai) - Series cleaning up and fixing bugs in the bad block handling code - Improve support for write failure simulation in null_blk - Various lock ordering fixes - Fixes for locking for debugfs attributes - Various ublk related fixes and improvements - Cleanups for blk-rq-qos wait handling - blk-throttle fixes - Fixes for loop dio and sync handling - Fixes and cleanups for the auto-PI code - Block side support for hardware encryption keys in blk-crypto - Various cleanups and fixes * tag 'for-6.15/block-20250322' of git://git.kernel.dk/linux: (105 commits) nvmet: replace max(a, min(b, c)) by clamp(val, lo, hi) nvme-tcp: fix selinux denied when calling sock_sendmsg nvmet: pci-epf: Always configure BAR0 as 64-bit nvmet: Remove duplicate uuid_copy nvme: zns: Simplify nvme_zone_parse_entry() nvmet: pci-epf: Remove redundant 'flush_workqueue()' calls nvmet-fc: Remove unused functions nvme-pci: remove stale comment nvme-fc: Utilise min3() to simplify queue count calculation nvme-multipath: Add visibility for queue-depth io-policy nvme-multipath: Add visibility for numa io-policy nvme-multipath: Add visibility for round-robin io-policy nvmet: add tls_concat and tls_key debugfs entries nvmet-tcp: support secure channel concatenation nvmet: Add 'sq' argument to alloc_ctrl_args nvme-fabrics: reset admin connection for secure concatenation nvme-tcp: request secure channel concatenation nvme-keyring: add nvme_tls_psk_refresh() nvme: add nvme_auth_derive_tls_psk() nvme: add nvme_auth_generate_digest() ...

block: remove unused parameter 'q' parameter in __blk_rq_map_sg()

2025-03-13T11:46:19+00:00

request_queue param is no longer used by blk_rq_map_sg and __blk_rq_map_sg. Remove it. Signed-off-by: Anuj Gupta Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20250313035322.243239-1-anuj20.g@samsung.com Signed-off-by: Jens Axboe

block: change blk_mq_add_to_batch() third argument type to bool

2025-03-12T14:26:36+00:00

Commit 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") modified the evaluation criteria for the third argument, 'ioerror', in the blk_mq_add_to_batch() function. Initially, the function had checked if 'ioerror' equals zero. Following the commit, it started checking for negative error values, with the presumption that such values, for instance -EIO, would be passed in. However, blk_mq_add_to_batch() callers do not pass negative error values. Instead, they pass status codes defined in various ways: - NVMe PCI and Apple drivers pass NVMe status code - virtio_blk driver passes the virtblk request header status byte - null_blk driver passes blk_status_t These codes are either zero or positive, therefore the revised check fails to function as intended. Specifically, with the NVMe PCI driver, this modification led to the failure of the blktests test case nvme/039. In this test scenario, errors are artificially injected to the NVMe driver, resulting in positive NVMe status codes passed to blk_mq_add_to_batch(), which unexpectedly processes the failed I/O in a batch. Hence the failure. To correct the ioerror check within blk_mq_add_to_batch(), make all callers to uniformly pass the argument as boolean. Modify the callers to check their specific status codes and pass the boolean value 'is_error'. Also describe the arguments of blK_mq_add_to_batch as kerneldoc. Fixes: 1f47ed294a2b ("block: cleanup and fix batch completion adding conditions") Signed-off-by: Shin'ichiro Kawasaki Link: https://lore.kernel.org/r/20250311104359.1767728-3-shinichiro.kawasaki@wdc.com [axboe: fold in documentation update] Signed-off-by: Jens Axboe