kernel/linux.git/drivers/nvdimm/Makefile, branch v6.6.131

drivers/nvdimm: Fix build failure when CONFIG_PERF_EVENTS is not set

2022-03-23T19:17:36+00:00

The following build failure occurs when CONFIG_PERF_EVENTS is not set as generic pmu functions are not visible in that scenario. |-- s390-randconfig-r044-20220313 | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_migrate_context | |-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_register | `-- nd_perf.c:(.text):undefined-reference-to-perf_pmu_unregister Similar build failure in nds32 architecture: nd_perf.c:(.text+0x21e): undefined reference to `perf_pmu_migrate_context' nd_perf.c:(.text+0x434): undefined reference to `perf_pmu_register' nd_perf.c:(.text+0x57c): undefined reference to `perf_pmu_unregister' Fix this issue by adding check for CONFIG_PERF_EVENTS config option and disabling the nvdimm perf interface incase this config is not set. Also remove function declaration of perf_pmu_migrate_context, perf_pmu_register, perf_pmu_unregister functions from nd.h as these are common pmu functions which are part of perf_event.h and since we are disabling nvdimm perf interface incase CONFIG_PERF_EVENTS option is not set, we not need to declare them in nd.h Also move the platform_device header file addition part from nd.h to nd_perf.c and add stub functions for register_nvdimm_pmu and unregister_nvdimm_pmu functions to handle CONFIG_PERF_EVENTS=n case. Fixes: 0fab1ba6ad6b ("drivers/nvdimm: Add perf interface to expose nvdimm performance stats") (Commit id based on libnvdimm-for-next tree) Signed-off-by: Kajol Jain Link: https://lore.kernel.org/all/62317124.YBQFU33+s%2FwdvWGj%25lkp@intel.com/ Reported-by: kernel test robot Link: https://lore.kernel.org/r/20220323164550.109768-1-kjain@linux.ibm.com Signed-off-by: Dan Williams

nvdimm/blk: Delete the block-aperture window driver

2022-03-11T23:53:12+00:00

Block Aperture Window support was an attempt to layer an error model over PMEM for platforms that did not support machine-check-recovery. However, it was abandoned before it ever shipped, and only ever existed in the ACPI specification. Meanwhile Linux has carried a large pile of dead code for non-shipping infrastructure. For years it has been off to the side out of the way, but now CXL and recent directions with DAX support have the potential to collide with this code. In preparation for adding discontiguous namespace support, a pre-requisite for the nvdimm subsystem to replace device-mapper for striping + concatenation use cases, delete BLK aperture support. On the obscure chance that some hardware vendor shipped support for this mode, note that the driver will still keep BLK space reserved in the label area. So an end user in this case would still have the opportunity to report the regression to get BLK-mode support restored without risking the data they have on that device. Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/164688416668.2879318.16903178375774275120.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams

drivers/nvdimm: Add perf interface to expose nvdimm performance stats

2022-03-10T01:50:42+00:00

A common interface is added to get performance stats reporting support for nvdimm devices. Added interface defines supported event list, config fields for the event attributes and their corresponding bit values which are exported via sysfs. Interface also added support for pmu register/unregister functions, cpu hotplug feature along with macros for handling events addition via sysfs. It adds attribute groups for format, cpumask and events to the pmu structure. User could use the standard perf tool to access perf events exposed via nvdimm pmu. [Declare pmu functions in nd.h file to resolve implicit-function-declaration warning and make hotplug function static as reported by kernel test robot] Acked-by: Peter Zijlstra (Intel) Tested-by: Nageswara R Sastry Signed-off-by: Kajol Jain Link: https://lore.kernel.org/all/202202241242.zqzGkguy-lkp@intel.com/ Reported-by: kernel test robot Reviewed-by: Madhavan Srinivasan Link: https://lore.kernel.org/r/20220225143024.47947-3-kjain@linux.ibm.com Signed-off-by: Dan Williams

libnvdimm: Enable unit test infrastructure compile checks

2019-09-07T07:28:05+00:00

The infrastructure to mock core libnvdimm routines for unit testing purposes is prone to bitrot relative to refactoring of that core. Arrange for the unit test core to be built when CONFIG_COMPILE_TEST=y. This does not result in a functional unit test environment, it is only a helper for 0day to catch unit test build regressions. Note that there are a few x86isms in the implementation, so this does not bother compile testing this architectures other than 64-bit x86. Link: https://lore.kernel.org/r/156763690875.2556198.15786177395425033830.stgit@dwillia2-desk3.amr.corp.intel.com Reported-by: Christoph Hellwig Signed-off-by: Dan Williams Signed-off-by: Jason Gunthorpe

virtio-pmem: Add virtio pmem driver

2019-07-05T22:19:10+00:00

This patch adds virtio-pmem driver for KVM guest. Guest reads the persistent memory range information from Qemu over VIRTIO and registers it on nvdimm_bus. It also creates a nd_region object with the persistent memory range information so that existing 'nvdimm/pmem' driver can reserve this into system memory map. This way 'virtio-pmem' driver uses existing functionality of pmem driver to register persistent memory compatible for DAX capable filesystems. This also provides function to perform guest flush over VIRTIO from 'pmem' driver when userspace performs flush on DAX memory range. Signed-off-by: Pankaj Gupta Reviewed-by: Yuval Shaia Acked-by: Michael S. Tsirkin Acked-by: Jakub Staron Tested-by: Jakub Staron Reviewed-by: Cornelia Huck Signed-off-by: Dan Williams

acpi/nfit, libnvdimm: Add unlock of nvdimm support for Intel DIMMs

2018-12-14T01:54:13+00:00

Add support to unlock the dimm via the kernel key management APIs. The passphrase is expected to be pulled from userspace through keyutils. The key management and sysfs attributes are libnvdimm generic. Encrypted keys are used to protect the nvdimm passphrase at rest. The master key can be a trusted-key sealed in a TPM, preferred, or an encrypted-key, more flexible, but more exposure to a potential attacker. Signed-off-by: Dave Jiang Co-developed-by: Dan Williams Reported-by: Randy Dunlap Signed-off-by: Dan Williams

libnvdimm: Add device-tree based driver

2018-04-07T14:53:23+00:00

This patch adds peliminary device-tree bindings for persistent memory regions. The driver registers a libnvdimm bus for each pmem-region node and each address range under the node is converted to a region within that bus. Signed-off-by: Oliver O'Halloran Signed-off-by: Dan Williams

Merge tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2017-11-17T17:51:57+00:00

Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong " * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...

libnvdimm: move poison list functions to a new 'badrange' file

2017-11-02T17:42:30+00:00

nfit_test needs to use the poison list manipulation code as well. Make it more generic and in the process rename poison to badrange, and move all the related helpers to a new file. Signed-off-by: Dave Jiang [vishal: Add badrange.o to nfit_test's Kbuild] [vishal: add a missed include in bus.c for the new badrange functions] [vishal: rename all instances of 'be' to 'bre'] Signed-off-by: Vishal Verma Signed-off-by: Dan Williams

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman