kernel/linux.git/drivers/ntb/test, branch v5.4.50

NTB: perf: Fix race condition when run with ntb_test

2020-06-24T15:50:41+00:00

[ Upstream commit 34d8673a01b053b6231a995a4eec9341163d63be ] When running ntb_test, the script tries to run the ntb_perf test immediately after probing the modules. Since adding multi-port support, this fails seeing the new initialization procedure in ntb_perf can not complete instantly. To fix this we add a completion which is waited on when a test is started. In this way, run can be written any time after the module is loaded and it will wait for the initialization to complete instead of sending an error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: perf: Fix support for hardware that doesn't have port numbers

2020-06-24T15:50:41+00:00

[ Upstream commit b54369a248c2e033bfcf5d6917e08cf9d73d54a6 ] Legacy drivers do not have port numbers (but is reliably only two ports) and was broken by the recent commit that added mult-port support to ntb_perf. This is especially important to support the cross link topology which is perfectly symmetric and cannot assign unique port numbers easily. Hardware that returns zero for both the local port and the peer should just always use gidx=0 for the only peer. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: perf: Don't require one more memory window than number of peers

2020-06-24T15:50:40+00:00

[ Upstream commit a9c4211ac918ade1522aced6b5acfbe824722f7d ] ntb_perf should not require more than one memory window per peer. This was probably an off-by-one error. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: ntb_tool: reading the link file should not end in a NULL byte

2020-06-24T15:50:40+00:00

[ Upstream commit 912e12813dd03c602e4922fc34709ec4d4380cf0 ] When running ntb_test this warning is issued: ./ntb_test.sh: line 200: warning: command substitution: ignored null byte in input This is caused by the kernel returning one more byte than is necessary when reading the link file. Reduce the number of bytes read back to 2 as it was before the commit that regressed this. Fixes: 7f46c8b3a552 ("NTB: ntb_tool: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

ntb_tool: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40+00:00

[ Upstream commit 433efe720674efd9fdbcef78be75793393cf05db ] Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Sanjay R Mehta Signed-off-by: Arindam Nath Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

ntb_perf: pass correct struct device to dma_alloc_coherent

2020-06-24T15:50:40+00:00

[ Upstream commit 98f4e140264eeb52f22ff05be6b6dd48237255ac ] Currently, ntb->dev is passed to dma_alloc_coherent and dma_free_coherent calls. The returned dma_addr_t is the CPU physical address. This works fine as long as IOMMU is disabled. But when IOMMU is enabled, we need to make sure that IOVA is returned for dma_addr_t. So the correct way to achieve this is by changing the first parameter of dma_alloc_coherent() as ntb->pdev->dev instead. Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Signed-off-by: Sanjay R Mehta Signed-off-by: Arindam Nath Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

NTB: ntb_pingpong: Choose doorbells based on port number

2020-06-24T15:50:18+00:00

[ Upstream commit ca93c45755da98302c93abdd788fc09113baf9e0 ] This commit fixes pingpong support for existing drivers that do not implement ntb_default_port_number() and ntb_default_peer_port_number(). This is required for hardware (like the crosslink topology of switchtec) which cannot assign reasonable port numbers to each port due to its perfect symmetry. Instead of picking the doorbell to use based on the the index of the peer, we use the peer's port number. This is a bit clearer and easier to understand. Fixes: c7aeb0afdcc2 ("NTB: ntb_pp: Add full multi-port NTB API support") Signed-off-by: Logan Gunthorpe Acked-by: Allen Hubbe Tested-by: Alexander Fomichev Signed-off-by: Jon Mason Signed-off-by: Sasha Levin

ntb: point to right memory window index

2019-09-23T21:20:27+00:00

second parameter of ntb_peer_mw_get_addr is pointing to wrong memory window index by passing "peer gidx" instead of "local gidx". For ex, "local gidx" value is '0' and "peer gidx" value is '1', then on peer side ntb_mw_set_trans() api is used as below with gidx pointing to local side gidx which is '0', so memroy window '0' is chosen and XLAT '0' will be programmed by peer side. ntb_mw_set_trans(perf->ntb, peer->pidx, peer->gidx, peer->inbuf_xlat, peer->inbuf_size); Now, on local side ntb_peer_mw_get_addr() is been used as below with gidx pointing to "peer gidx" which is '1', so pointing to memory window '1' instead of memory window '0'. ntb_peer_mw_get_addr(perf->ntb, peer->gidx, &phys_addr, &peer->outbuf_size); So this patch pass "local gidx" as parameter to ntb_peer_mw_get_addr(). Signed-off-by: Sanjay R Mehta Signed-off-by: Jon Mason

Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb

2019-07-21T16:46:59+00:00

Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...

NTB: Introduce NTB MSI Test Client

2019-06-13T13:02:51+00:00

Introduce a tool to test NTB MSI interrupts similar to the other NTB test tools. This tool creates a debugfs directory for each NTB device with the following files: port irqX_occurrences peerX/port peerX/count peerX/trigger The 'port' file tells the user the local port number and the 'occurrences' files tell the number of local interrupts that have been received for each interrupt. For each peer, the 'port' file and the 'count' file tell you the peer's port number and number of interrupts respectively. Writing the interrupt number to the 'trigger' file triggers the interrupt handler for the peer which should increment their corresponding 'occurrences' file. The 'ready' file indicates if a peer is ready, writing to this file blocks until it is ready. The module parameter num_irqs can be used to set the number of local interrupts. By default this is 4. This is only limited by the number of unused MSI interrupts registered by the hardware (this will require support of the hardware driver) and there must be at least 2*num_irqs + 1 spads registers available. Signed-off-by: Logan Gunthorpe Cc: Dave Jiang Cc: Allen Hubbe Signed-off-by: Jon Mason