kernel/linux.git/drivers/nfc/pn533, branch v6.6.148

nfc: pn533: allocate rx skb before consuming bytes

2026-04-18T08:39:51+00:00

commit c71ba669b570c7b3f86ec875be222ea11dacb352 upstream. pn532_receive_buf() reports the number of accepted bytes to the serdev core. The current code consumes bytes into recv_skb and may already hand a complete frame to pn533_recv_frame() before allocating a fresh receive buffer. If that alloc_skb() fails, the callback returns 0 even though it has already consumed bytes, and it leaves recv_skb as NULL for the next receive callback. That breaks the receive_buf() accounting contract and can also lead to a NULL dereference on the next skb_put_u8(). Allocate the receive skb lazily before consuming the next byte instead. If allocation fails, return the number of bytes already accepted. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Cc: stable@vger.kernel.org Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

NFC: pn533: bound the UART receive buffer

2026-04-11T12:19:20+00:00

[ Upstream commit 30fe3f5f6494f827d812ff179f295a8e532709d6 ] pn532_receive_buf() appends every incoming byte to dev->recv_skb and only resets the buffer after pn532_uart_rx_is_frame() recognizes a complete frame. A continuous stream of bytes without a valid PN532 frame header therefore keeps growing the skb until skb_put_u8() hits the tail limit. Drop the accumulated partial frame once the fixed receive buffer is full so malformed UART traffic cannot grow the skb past PN532_UART_SKB_BUFF_LEN. Fixes: c656aa4c27b1 ("nfc: pn533: add UART phy driver") Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260326142033.82297-1-pengpeng@iscas.ac.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

nfc: pn533: properly drop the usb interface reference on disconnect

2026-03-25T10:05:36+00:00

commit 12133a483dfa832241fbbf09321109a0ea8a520e upstream. When the device is disconnected from the driver, there is a "dangling" reference count on the usb interface that was grabbed in the probe callback. Fix this up by properly dropping the reference after we are done with it. Cc: stable Signed-off-by: Greg Kroah-Hartman Reviewed-by: Simon Horman Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Link: https://patch.msgid.link/2026022329-flashing-ought-7573@gregkh Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

nfc: pn533: Fix error code in pn533_acr122_poweron_rdr()

2026-01-11T14:21:46+00:00

[ Upstream commit 885bebac9909994050bbbeed0829c727e42bd1b7 ] Set the error code if "transferred != sizeof(cmd)" instead of returning success. Fixes: dbafc28955fa ("NFC: pn533: don't send USB data off of the stack") Signed-off-by: Dan Carpenter Link: https://patch.msgid.link/aTfIJ9tZPmeUF4W1@stanley.mountain Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

nfc: pn533: Add poll mod list filling check

2024-09-04T11:28:28+00:00

[ Upstream commit febccb39255f9df35527b88c953b2e0deae50e53 ] In case of im_protocols value is 1 and tm_protocols value is 0 this combination successfully passes the check 'if (!im_protocols && !tm_protocols)' in the nfc_start_poll(). But then after pn533_poll_create_mod_list() call in pn533_start_poll() poll mod list will remain empty and dev->poll_mod_count will remain 0 which lead to division by zero. Normally no im protocol has value 1 in the mask, so this combination is not expected by driver. But these protocol values actually come from userspace via Netlink interface (NFC_CMD_START_POLL operation). So a broken or malicious program may pass a message containing a "bad" combination of protocol parameter values so that dev->poll_mod_count is not incremented inside pn533_poll_create_mod_list(), thus leading to division by zero. Call trace looks like: nfc_genl_start_poll() nfc_start_poll() ->start_poll() pn533_start_poll() Add poll mod list filling check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: dfccd0f58044 ("NFC: pn533: Add some polling entropy") Signed-off-by: Aleksandr Mishin Acked-by: Krzysztof Kozlowski Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

nfc: Switch i2c drivers back to use .probe()

2023-05-22T10:41:57+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König Reviewed-by: Luca Ceresoli Signed-off-by: David S. Miller

nfc: pn533: initialize struct pn533_out_arg properly

2023-03-10T23:52:25+00:00

struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 9dab880d675b ("nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()") Reported-by: syzbot+1e608ba4217c96d1952f@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230309165050.207390-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski

nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()

2023-01-09T07:34:13+00:00

Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by: Minsuk Kang Signed-off-by: David S. Miller

treewide: Convert del_timer() to timer_shutdown()

2022-12-25T21:38:09+00:00

Due to several bugs caused by timers being re-armed after they are shutdown and just before they are freed, a new state of timers was added called "shutdown". After a timer is set to this state, then it can no longer be re-armed. The following script was run to find all the trivial locations where del_timer() or del_timer_sync() is called in the same function that the object holding the timer is freed. It also ignores any locations where the timer->function is modified between the del_timer*() and the free(), as that is not considered a "trivial" case. This was created by using a coccinelle script and the following commands: $ cat timer.cocci @@ expression ptr, slab; identifier timer, rfield; @@ ( - del_timer(&ptr->timer); + timer_shutdown(&ptr->timer); | - del_timer_sync(&ptr->timer); + timer_shutdown_sync(&ptr->timer); ) ... when strict when != ptr->timer ( kfree_rcu(ptr, rfield); | kmem_cache_free(slab, ptr); | kfree(ptr); ) $ spatch timer.cocci . > /tmp/t.patch $ patch -p1 < /tmp/t.patch Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/ Signed-off-by: Steven Rostedt (Google) Acked-by: Pavel Machek [ LED ] Acked-by: Kalle Valo [ wireless ] Acked-by: Paolo Abeni [ networking ] Signed-off-by: Linus Torvalds

nfc: pn533: Clear nfc_target before being used

2022-12-15T04:51:29+00:00

Fix a slab-out-of-bounds read that occurs in nla_put() called from nfc_genl_send_target() when target->sensb_res_len, which is duplicated from an nfc_target in pn533, is too large as the nfc_target is not properly initialized and retains garbage values. Clear nfc_targets with memset() before they are used. Found by a modified version of syzkaller. BUG: KASAN: slab-out-of-bounds in nla_put Call Trace: memcpy nla_put nfc_genl_dump_targets genl_lock_dumpit netlink_dump __netlink_dump_start genl_family_rcv_msg_dumpit genl_rcv_msg netlink_rcv_skb genl_rcv netlink_unicast netlink_sendmsg sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 Fixes: 673088fb42d0 ("NFC: pn533: Send ATR_REQ directly for active device detection") Fixes: 361f3cb7f9cf ("NFC: DEP link hook implementation for pn533") Signed-off-by: Minsuk Kang Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221214015139.119673-1-linuxlovemin@yonsei.ac.kr Signed-off-by: Jakub Kicinski