kernel/linux.git/drivers/nfc/Kconfig, branch v6.19.11

nfc: Add a virtual nci device driver

2021-01-30T02:03:33+00:00

NCI virtual device simulates a NCI device to the user. It can be used to validate the NCI module and applications. This driver supports communication between the virtual NCI device and NCI module. Signed-off-by: Bongsu Jeon Signed-off-by: Jakub Kicinski

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

NFC: trf7970a: Convert to descriptor based GPIO interface

2017-06-18T21:57:58+00:00

The trf7970a driver uses the deprecated integer-based GPIO consumer interface so convert it to use the new descriptor-based GPIO consumer interface. Signed-off-by: Mark Greer Signed-off-by: Samuel Ortiz

NFC: remove TI nfcwilink driver

2017-04-01T21:04:30+00:00

It appears that TI WiLink devices including NFC (WL185x/WL189x) never shipped. The only information I found were announcements in Feb 2012 about the parts. There's been no activity on this driver besided common changes since initially added in Jan 2012. There's also no in users that instantiate the platform device (nor DT bindings). This is a first step in removing TI ST (shared transport) driver in favor of extending the BT hci_ll driver to support WL183x chips. Cc: Ilan Elias Cc: Marcel Holtmann Cc: Samuel Ortiz Cc: Lauro Ramos Venancio Cc: Aloisio Almeida Jr Cc: linux-wireless@vger.kernel.org Signed-off-by: Rob Herring Signed-off-by: Samuel Ortiz

NFC: nfcsim: Fix missing dependency on NFC_DIGITAL

2016-07-06T08:02:09+00:00

The nfcsim driver now depends on the Digital layer. This patch adds the missing dependency on NFC_DIGITAL for NFC_SIM config. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz

NFC: pn533: Separate physical layer from the core implementation

2016-04-09T21:53:15+00:00

The driver now has all core stuff isolated in one file, and all the hardware link specifics in another. Writing a pn533 driver on top of another hardware link is now just a matter of adding a new file for that new hardware specifics. The first user of this separation will be the i2c based pn532 driver that reuses pn533 core implementation on top of an i2c layer. Signed-off-by: Michael Thalmeier Signed-off-by: Samuel Ortiz

NFC: Add STMicroelectronics ST95HF driver

2015-12-29T18:06:11+00:00

This driver supports STMicroelectronics NFC Transceiver "ST95HF", in in initiator role to read/write ISO14443 Type 4A, ISO14443 Type 4B and ISO15693 Type5 tags. The ST95HF datasheet is available here: http://www.st.com/web/en/resource/technical/document/datasheet/DM00102056.pdf Signed-off-by: Shikha Singh Signed-off-by: Samuel Ortiz

NFC: Add Intel Fields Peak NFC solution driver

2015-10-25T19:29:16+00:00

Fields Peak complies with the ISO/IEC 14443A/B, 15693, 18092, and JIS X 6319-4. It is an NCI based controller. RF Protocols supported: - NFC Forum Type 1 Tags (Jewel, Topaz) - NFC Forum Type 2 Tags (Mifare UL) - NFC Forum Type 3 Tags (FeliCa) - NFC Forum Type 4A (ISO/IEC 14443 A-4 106kbps to 848kbps) - NFC Forum Type 4B (ISO/IEC 14443 B-4 106kbps to 848kbps) - NFCIP in passive and active modes (ISO/IEC 18092 106kbps to 424kbps) - B’ (based on ISO/IEC 14443 B-2) - iCLASS (based on ISO/IEC 15693-2) - Vicinity cards (ISO/IEC 15693-3) - Kovio tags (NFC Forum Type 2) The device can be enumerated using ACPI using the id INT339A. The 1st GPIO is the IRQ and the 2nd is the RESET pin. Signed-off-by: Robert Dolca Signed-off-by: Samuel Ortiz

nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip

2015-08-20T19:23:39+00:00

Add driver for Samsung S3FWRN5 NFC controller. S3FWRN5 is using NCI protocol and I2C communication interface. Signed-off-by: Robert Baldyga Signed-off-by: Samuel Ortiz

nfc: st-nci: Rename st21nfcb to st-nci

2015-06-10T10:51:44+00:00

STMicroelectronics NFC NCI chips family is extending with the new ST21NFCC using the AMS AS39230 RF booster. The st21nfcb driver is relevant for this solution and might be with future products. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz