kernel/linux.git/drivers/net, branch v6.18.35

net: phy: micrel: fix LAN8814 QSGMII soft reset

2026-06-09T10:28:52+00:00

[ Upstream commit e027c218c482c6a0ae1948129ccda3b0a2033368 ] LAN8814 QSGMII soft reset was moved into the probe function to avoid triggering it for each of 4 PHY-s in the package. However, that broke QSGMII link between the MAC and PHY on most LAN8814 PHY-s, specificaly for us on the Microchip LAN969x switch. Reading the QSGMII status registers it was visible that lanes were only partially synced. It looks like the reset timing is crucial, so lets move the reset back into the .config_init function but guard it with phy_package_init_once() to avoid it being triggered on each of 4 PHY-s in the package. Change the probe function to use phy_package_probe_once() for coma and PtP setup. Fixes: 96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface") Signed-off-by: Robert Marko Link: https://patch.msgid.link/20260428134138.1741253-1-robert.marko@sartura.hr Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

octeontx2-pf: avoid double free of pool->stack on AQ init failure

2026-06-09T10:28:51+00:00

[ Upstream commit 9b244c242bec48b37e82b89787afd6a4c43457e1 ] otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues") Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

macsec: fix replay protection at XPN lower-PN wrap

2026-06-09T10:28:40+00:00

commit e68842b3356471ba56c882209f324613dac47f64 upstream. In macsec_post_decrypt(), when pn is U32_MAX, pn + 1 overflows u32 to 0 and the first branch never fires. If next_pn_halves.lower is also in the upper half, pn_same_half(pn, lower) is true and the XPN else-if does not fire either, leaving next_pn_halves unchanged. An attacker that captures the legitimate frame carrying pn == 0xFFFFFFFF on an XPN association can then replay it indefinitely, since lowest_pn never rises above the captured pn and macsec_decrypt() reconstructs the same IV. Extend the XPN else-if to also fire when pn + 1 wraps to 0, so receipt of pn == U32_MAX advances next_pn_halves to (upper + 1, 0). Fixes: a21ecf0e0338 ("macsec: Support XPN frame handling - IEEE 802.1AEbw") Reported-by: Yuhao Jiang Cc: stable@vger.kernel.org Signed-off-by: Junrui Luo Link: https://patch.msgid.link/SYBPR01MB78813FD49E58F253B989F197AF012@SYBPR01MB7881.ausprd01.prod.outlook.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

wireguard: send: append trailer after expanding head

2026-06-09T10:28:40+00:00

commit f75e3eb08fe31d30a9af6ed80cdd22e6772837e2 upstream. With how this is currently written, we add the trailer, zero it out, and then add the header space on. If that header space requires a reallocation + copy, the zeros in the trailer aren't copied, because the skb len hasn't actually been yet expanded to cover that. Instead add the padding at the end of the process rather than at the beginning. Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld Link: https://patch.msgid.link/20260529173134.3080773-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

phy: mscc: Use PHY_ID_MATCH_EXACT for VSC8584, VSC8582, VSC8575, VSC856X

2026-06-09T10:28:32+00:00

[ Upstream commit 1bc80d673087e5704adbb3ee8e4b785c14899cce ] As the PHYs VSC8584, VSC8582, VSC8575 and VSC856X exists only as rev B, we can use PHY_ID_MATCH_EXACT to match exactly on revision B of the PHY. Because of this change then there is not need the check if it is a different revision than rev B in the function vsc8584_probe() as we already know that this will never happen. These changes are a preparation for the next patch because in that patch we will make the PHYs VSC8574 and VSC8572 to use vsc8584_probe() and these PHYs have multiple revision. Reviewed-by: Maxime Chevallier Signed-off-by: Horatiu Vultur Link: https://patch.msgid.link/20251023191350.190940-2-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mana: Skip redundant detach on already-detached port

2026-06-09T10:28:31+00:00

[ Upstream commit 5b05aa36ee24297d7296ca58dfd8c448d0e4cda3 ] When mana_per_port_queue_reset_work_handler() runs after a previous detach succeeded but attach failed, the port is left in a detached state with apc->tx_qp and apc->rxqs already freed. Calling mana_detach() again unconditionally leads to NULL pointer dereferences during queue teardown. Add an early exit in mana_detach() when the port is already in detached state (!netif_device_present) for non-close callers, making it safe to call idempotently. This allows the queue reset handler and other recovery paths to simply retry mana_attach() without redundant teardown. Fixes: 3b194343c250 ("net: mana: Implement ndo_tx_timeout and serialize queue resets per port.") Reviewed-by: Haiyang Zhang Signed-off-by: Dipayaan Roy Link: https://patch.msgid.link/20260525081129.1230035-3-dipayanroy@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: mana: Add NULL guards in teardown path to prevent panic on attach failure

2026-06-09T10:28:31+00:00

[ Upstream commit 17bfe0a8c014ee1d542ad352cd6a0a505361664a ] When queue allocation fails partway through, the error cleanup frees and NULLs apc->tx_qp and apc->rxqs. Multiple teardown paths such as mana_remove(), mana_change_mtu() recovery, and internal error handling in mana_alloc_queues() can subsequently call into functions that dereference these pointers without NULL checks: - mana_chn_setxdp() dereferences apc->rxqs[0], causing a NULL pointer dereference panic (CR2: 0000000000000000 at mana_chn_setxdp+0x26). - mana_destroy_vport() iterates apc->rxqs without a NULL check. - mana_fence_rqs() iterates apc->rxqs without a NULL check. - mana_dealloc_queues() iterates apc->tx_qp without a NULL check. Add NULL guards for apc->rxqs in mana_fence_rqs(), mana_destroy_vport(), and before the mana_chn_setxdp() call. Add a NULL guard for apc->tx_qp in mana_dealloc_queues() to skip TX queue draining when TX queues were never allocated or already freed. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Reviewed-by: Haiyang Zhang Signed-off-by: Dipayaan Roy Link: https://patch.msgid.link/20260525081129.1230035-2-dipayanroy@linux.microsoft.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: hibmcge: disable Relaxed Ordering to fix RX packet corruption

2026-06-09T10:28:30+00:00

[ Upstream commit 463a1271aa26eac992851b9d98cc75bc3cd4a1ed ] When SMMU is disabled, the hibmcge driver may receive corrupted packets. The hardware writes packet data and descriptors to the same page, but with Relaxed Ordering enabled, PCI write transactions may not be strictly ordered. This can cause the driver to observe a valid descriptor before the corresponding packet data is fully written. Fix this by clearing PCI_EXP_DEVCTL_RELAX_EN in the PCI bridge control register to ensure strict write ordering between packet data and descriptors. Fixes: f72e25594061 ("net: hibmcge: Implement rx_poll function to receive packets") Signed-off-by: Jijie Shao Link: https://patch.msgid.link/20260525144525.94884-2-shaojijie@huawei.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

bonding: refuse to enslave CAN devices

2026-06-09T10:28:29+00:00

[ Upstream commit 8ba68464e4787b6a7ec938826e16124df20fd23d ] syzbot reported a kernel paging request crash in can_rx_unregister() inside net/can/af_can.c. The crash occurs because a virtual CAN device (vxcan) is being enslaved to a bonding master. During the enslavement process, the bonding driver mutates and modifies the network device states to fit an Ethernet-like aggregation model. However, CAN devices operate on a completely different Layer 2 architecture, relying on the CAN mid-layer private data structure (can_ml_priv) instead of standard Ethernet structures. Since bonding does not initialize or maintain these CAN structures, subsequent operations on the half-enslaved interface (such as closing associated sockets via isotp_release) lead to a null-pointer dereference when accessing the CAN receiver lists. Bonding CAN interfaces is architecturally invalid as CAN lacks MAC addresses, ARP capabilities, and standard Ethernet link-layer mechanisms. While generic loopback devices are blocked globally in net/core/dev.c, virtual CAN devices bypass this check because they do not carry the IFF_LOOPBACK flag, despite acting as local software-loopbacks. Fix this by explicitly blocking network devices of type ARPHRD_CAN from being enslaved at the very beginning of bond_enslave(). This prevents illegal state mutations, eliminates the resulting KASAN crashes, and avoids potential memory leaks from incomplete socket cleanups. As the CAN support has been added a long time after bonding the Fixes-tag points to the introduction of ARPHRD_CAN that would have needed a specific handling in bonding_main.c. Fixes: cd05acfe65ed ("[CAN]: Allocate protocol numbers for PF_CAN") Reported-by: syzbot+8ed98cbd0161632bce95@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8ed98cbd0161632bce95 Signed-off-by: Oliver Hartkopp Acked-by: Jay Vosburgh Link: https://patch.msgid.link/20260526-bonding-candev-v1-1-ba1df400918a@hartkopp.net Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()

2026-06-09T10:28:28+00:00

[ Upstream commit 7d9ef0cb271555d8cf39fefe6c981e1493b25ecf ] skb_tunnel_check_pmtu() can change skb->head. Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF. Use instead ip_hdr(skb) as done in drivers/net/bareudp.c and drivers/net/geneve.c. Found by Sashiko. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Signed-off-by: Eric Dumazet Reviewed-by: Stefano Brivio Link: https://patch.msgid.link/20260525203642.2389723-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin