kernel/linux.git/drivers/net, branch v6.12.94

hv_netvsc: use kmap_local_page in netvsc_copy_to_send_buf

2026-06-19T11:42:36+00:00

[ Upstream commit 004e9ecfe6c5384f9e0b2f6f6389d42ec22789af ] netvsc_copy_to_send_buf() copies page buffer entries into the VMBus send buffer using phys_to_virt() on the entry PFN. Entries for the RNDIS header and the skb linear data come from kmalloc'd memory and are always in the kernel direct map, but entries for skb fragments reference page cache or user pages, which on 32-bit x86 with CONFIG_HIGHMEM=y can live above the LOWMEM boundary. For such a page phys_to_virt() returns an address outside the direct map and the subsequent memcpy() faults on the transmit softirq path, which is fatal. Map the pages with kmap_local_page() instead, handling two properties of the page buffer entries: - pb[i].pfn is a Hyper-V PFN at HV_HYP_PAGE_SIZE (4K) granularity, not a native PFN. Reconstruct the physical address first and derive the native page from it, so the mapping stays correct where PAGE_SIZE > HV_HYP_PAGE_SIZE (e.g. arm64 with 64K pages). - Since commit 41a6328b2c55 ("hv_netvsc: Preserve contiguous PFN grouping in the page buffer array"), an entry describes a full physically contiguous fragment and pb[i].len can exceed PAGE_SIZE, while kmap_local_page() maps a single page. Copy page by page, splitting at native page boundaries. The copy path only handles packets smaller than the send section size (6144 bytes by default); larger packets take the cp_partial path where only the RNDIS header is copied. So entries here are bounded by the section size and a copy is split at most once on 4K-page systems. On !CONFIG_HIGHMEM configs kmap_local_page() folds to page_address() and no mapping work is added. Fixes: c25aaf814a63 ("hyperv: Enable sendbuf mechanism on the send path") Cc: stable@vger.kernel.org Signed-off-by: Anton Leontev Link: https://patch.msgid.link/20260604165938.32033-1-leontyevantony@gmail.com Signed-off-by: Paolo Abeni [ adapted `phys_to_page(paddr)` to `pfn_to_page(PHYS_PFN(paddr))` ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

rtase: Reset TX subqueue when clearing TX ring

2026-06-19T11:42:34+00:00

commit ab1ecaabe74b7d86c38ab2ab44bd56cdcc33645a upstream. rtase_tx_clear() clears the TX ring and resets the ring indexes. However, the TX queue state and BQL accounting are not reset at the same time. This may leave __QUEUE_STATE_STACK_XOFF asserted after rtase_sw_reset(), preventing new TX packets from being scheduled. Reset the TX subqueue when clearing the TX ring so the TX queue state and BQL accounting are restored together. Fixes: 5a2a2f15244c ("rtase: Implement the rtase_down function") Cc: stable@vger.kernel.org Signed-off-by: Justin Lai Reviewed-by: Alexander Lobakin Link: https://patch.msgid.link/20260602114659.12335-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

rtase: Avoid sleeping in get_stats64()

2026-06-19T11:42:34+00:00

commit 9fc237f8d49f06d05f0f8e80361047b718894e81 upstream. The .ndo_get_stats64 callback must not sleep because it can be called when reading /proc/net/dev. rtase_get_stats64() calls rtase_dump_tally_counter(), which polls the tally counter dump bit with read_poll_timeout(). This may sleep while waiting for the hardware counter dump to complete. Use read_poll_timeout_atomic() instead to avoid sleeping in the get_stats64() path. Fixes: 079600489960 ("rtase: Implement net_device_ops") Cc: stable@vger.kernel.org Signed-off-by: Justin Lai Link: https://patch.msgid.link/20260603061816.31356-1-justinlai0215@realtek.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

octeontx2-af: fix memory leak in rvu_setup_hw_resources()

2026-06-19T11:42:33+00:00

commit 09a5bf856aa759513afc4afd233d15bcc711b84e upstream. If rvu_npc_exact_init() fails in rvu_setup_hw_resources(), the function returns directly instead of jumping to the error handling path. This causes a resource leak for the previously initialized CGX, NPC, fwdata, and MSI-X states. Fix this by replacing the direct return with goto cgx_err to ensure proper cleanup. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc6. An x86_64 allyesconfig build showed no new warnings. As we do not have access to Marvell OcteonTX2 RVU AF hardware to test with, no runtime testing was able to be performed. Fixes: 3571fe07a090 ("octeontx2-af: Drop rules for NPC MCAM") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Signed-off-by: Zilin Guan Link: https://patch.msgid.link/20260604143756.1524482-1-dawei.feng@seu.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: mv643xx: fix OF node refcount

2026-06-19T11:42:32+00:00

commit 4aacf509e537a711fa71bca9f234e5eb6968850e upstream. Platform devices created with platform_device_alloc() call platform_device_release() when the last reference to the device's kobject is dropped. This function calls of_node_put() unconditionally. This works fine for devices created with platform_device_register_full() but users of the split approach (platform_device_alloc() + platform_device_add()) must bump the reference of the of_node they assign manually. Add the missing call to of_node_get(). Cc: stable@vger.kernel.org Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260602073414.22500-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: bonding: fix NULL pointer dereference in bond_do_ioctl()

2026-06-19T11:42:32+00:00

commit a764b0e8317a863006e05732e1aefe821b9d8c2d upstream. In bond_do_ioctl(), slave_dev is obtained via __dev_get_by_name() which can return NULL if the requested interface name does not exist. However, the subsequent slave_dbg() call is placed before the NULL check: slave_dev = __dev_get_by_name(net, ifr->ifr_slave); slave_dbg(bond_dev, slave_dev, "slave_dev=%p:\n", slave_dev); //here if (!slave_dev) return -ENODEV; The slave_dbg() macro expands to netdev_dbg(bond_dev, "(slave %s): " fmt, (slave_dev)->name, ...) which unconditionally dereferences slave_dev->name before the NULL check is performed. This results in a NULL pointer dereference kernel oops when a user calls bonding ioctl (e.g. SIOCBONDENSLAVE, SIOCBONDRELEASE, etc.) with a non-existent slave interface name. This is reachable from userspace via the bonding ioctl interface with CAP_NET_ADMIN capability, making it a potential local denial-of-service vector. Fix by moving the slave_dbg() call after the NULL check. Fixes: e2a7420df2e0 ("bonding/main: convert to using slave printk macros") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: ZhaoJinming Link: https://patch.msgid.link/20260601085649.4029067-1-zhaojinming@uniontech.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net/mlx5: Reorder completion before putting command entry in cmd_work_handler

2026-06-19T11:42:32+00:00

commit 02896a7fa4cd3ec61d60ba30136841e4f04bdeac upstream. Assuming callback != NULL && !page_queue, cmd_work_handler takes command entry with refcnt == 1 from mlx5_cmd_invoke. If either semaphore timeout or index allocation error happens, it does final cmd_ent_put(ent). To avoid access to freed memory, notify slotted completion before cmd_ent_put. This is theoretical issue found by Svace static analyser. Cc: stable@vger.kernel.org Fixes: 485d65e135712 ("net/mlx5: Add a timeout to acquire the command queue semaphore") Fixes: 0e2909c6bec90 ("net/mlx5: Fix variable not being completed when function returns") Signed-off-by: Nikolay Kuratov Reviewed-by: Md Haris Iqbal Reviewed-by: Moshe Shemesh Acked-by: Tariq Toukan Link: https://patch.msgid.link/20260526162932.501584-1-kniv@yandex-team.ru Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

bnxt_en: Fix NULL pointer dereference

2026-06-19T11:42:31+00:00

commit d930276f2cddd0b7294cac7a8fe7b877f6d9e08d upstream. PCIe errors detected by a Root Port or Downstream Port cause error recovery services to run on all subordinate devices regardless of administrative state. The .error_detected() callback, bnxt_io_error_detected(), disables and synchronizes IRQs via bnxt_disable_int_sync(), which calls bnxt_cp_num_to_irq_num() to map completion rings to IRQs using bp->bnapi. Since bp->bnapi is allocated on NIC open and freed on NIC close, PCIe error recovery on a closed NIC can dereference a NULL pointer. Check if bp->bnapi is NULL before disabling and synchronizing IRQs. Fixes: e5811b8c09df ("bnxt_en: Add IRQ remapping logic.") Cc: stable@vger.kernel.org Signed-off-by: Kyle Meyer Reviewed-by: Pavan Chebbi Link: https://patch.msgid.link/aiNM1CY2-StPilxW@hpe.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: mvpp2: build skb from XDP-adjusted data on XDP_PASS

2026-06-19T11:42:26+00:00

[ Upstream commit 77a6b90ce56bc982dcfa94229b8e28e6abb16e95 ] When an XDP program uses bpf_xdp_adjust_head() or bpf_xdp_adjust_tail() and then returns XDP_PASS, mvpp2 still builds the skb from fixed offsets derived from the original RX descriptor. Packet geometry changes made by the XDP program are therefore discarded before the skb reaches the stack. Update rx_offset and rx_bytes from xdp.data and xdp.data_end for XDP_PASS. This makes skb_reserve() and skb_put() reflect the packet seen by XDP, and makes RX byte accounting for XDP_PASS follow the length of the skb passed to the network stack. Keep a separate rx_sync_size for page-pool recycling on skb allocation failure, which must stay tied to the received buffer range. Non-PASS verdicts continue to account the descriptor length because no skb is passed up in those cases. Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-5-mail@tk154.de Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: mvpp2: refill RX buffers before XDP or skb use

2026-06-19T11:42:26+00:00

[ Upstream commit 5e8e2a9624df72fca7c736b2966b2cbf6c9c3ff6 ] The RX error path returns the current descriptor buffer to the hardware BM pool. That is only valid while the driver still owns the buffer. mvpp2_rx_refill() can fail after the current buffer has been handed to XDP or attached to an skb. In those cases mvpp2_run_xdp() may have recycled, redirected, or queued the page for XDP_TX, and an skb free also retires the data buffer. Returning such a buffer to BM lets hardware DMA into memory that is no longer owned by the RX ring. Refill the BM pool before handing the current buffer to XDP or to the skb. If the allocation fails there, drop the packet and return the still-owned current buffer to BM, preserving the pool depth. Once the refill succeeds, later local drops retire/free the current buffer instead of returning it to BM. Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Fixes: d6526926de73 ("net: mvpp2: fix memory leak in mvpp2_rx") Signed-off-by: Til Kaiser Link: https://patch.msgid.link/20260607134943.21996-4-mail@tk154.de Signed-off-by: Paolo Abeni Stable-dep-of: 77a6b90ce56b ("net: mvpp2: build skb from XDP-adjusted data on XDP_PASS") Signed-off-by: Sasha Levin