kernel/linux.git/drivers/net, branch v6.1.87

net: ena: Fix incorrect descriptor free behavior

2024-04-17T09:18:26+00:00

[ Upstream commit bf02d9fe00632d22fa91d34749c7aacf397b6cde ] ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: ena: Wrong missing IO completions check order

2024-04-17T09:18:26+00:00

[ Upstream commit f7e417180665234fdb7af2ebe33d89aaa434d16f ] Missing IO completions check is called every second (HZ jiffies). This commit fixes several issues with this check: 1. Duplicate queues check: Max of 4 queues are scanned on each check due to monitor budget. Once reaching the budget, this check exits under the assumption that the next check will continue to scan the remainder of the queues, but in practice, next check will first scan the last already scanned queue which is not necessary and may cause the full queue scan to last a couple of seconds longer. The fix is to start every check with the next queue to scan. For example, on 8 IO queues: Bug: [0,1,2,3], [3,4,5,6], [6,7] Fix: [0,1,2,3], [4,5,6,7] 2. Unbalanced queues check: In case the number of active IO queues is not a multiple of budget, there will be checks which don't utilize the full budget because the full scan exits when reaching the last queue id. The fix is to run every TX completion check with exact queue budget regardless of the queue id. For example, on 7 IO queues: Bug: [0,1,2,3], [4,5,6], [0,1,2,3] Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4] The budget may be lowered in case the number of IO queues is less than the budget (4) to make sure there are no duplicate queues on the same check. For example, on 3 IO queues: Bug: [0,1,2,0], [1,2,0,1] Fix: [0,1,2], [0,1,2] Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Amit Bernstein Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: ena: Fix potential sign extension issue

2024-04-17T09:18:26+00:00

[ Upstream commit 713a85195aad25d8a26786a37b674e3e5ec09e3c ] Small unsigned types are promoted to larger signed types in the case of multiplication, the result of which may overflow. In case the result of such a multiplication has its MSB turned on, it will be sign extended with '1's. This changes the multiplication result. Code example of the phenomenon: ------------------------------- u16 x, y; size_t z1, z2; x = y = 0xffff; printk("x=%x y=%x\n",x,y); z1 = x*y; z2 = (size_t)x*y; printk("z1=%lx z2=%lx\n", z1, z2); Output: ------- x=ffff y=ffff z1=fffffffffffe0001 z2=fffe0001 The expected result of ffff*ffff is fffe0001, and without the explicit casting to avoid the unwanted sign extension we got fffffffffffe0001. This commit adds an explicit casting to avoid the sign extension issue. Fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: dsa: mt7530: trap link-local frames regardless of ST Port State

2024-04-17T09:18:25+00:00

[ Upstream commit 17c560113231ddc20088553c7b499b289b664311 ] In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) of the Open Systems Interconnection basic reference model (OSI/RM) are described; the medium access control (MAC) and logical link control (LLC) sublayers. The MAC sublayer is the one facing the physical layer. In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A Bridge component comprises a MAC Relay Entity for interconnecting the Ports of the Bridge, at least two Ports, and higher layer entities with at least a Spanning Tree Protocol Entity included. Each Bridge Port also functions as an end station and shall provide the MAC Service to an LLC Entity. Each instance of the MAC Service is provided to a distinct LLC Entity that supports protocol identification, multiplexing, and demultiplexing, for protocol data unit (PDU) transmission and reception by one or more higher layer entities. It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC Entity associated with each Bridge Port is modeled as being directly connected to the attached Local Area Network (LAN). On the switch with CPU port architecture, CPU port functions as Management Port, and the Management Port functionality is provided by software which functions as an end station. Software is connected to an IEEE 802 LAN that is wholly contained within the system that incorporates the Bridge. Software provides access to the LLC Entity associated with each Bridge Port by the value of the source port field on the special tag on the frame received by software. We call frames that carry control information to determine the active topology and current extent of each Virtual Local Area Network (VLAN), i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration Protocol Data Units (MVRPDUs), and frames from other link constrained protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They are not forwarded by a Bridge. Permanently configured entries in the filtering database (FDB) ensure that such frames are discarded by the Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: Each of the reserved MAC addresses specified in Table 8-1 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be permanently configured in the FDB in C-VLAN components and ERs. Each of the reserved MAC addresses specified in Table 8-2 (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently configured in the FDB in S-VLAN components. Each of the reserved MAC addresses specified in Table 8-3 (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in TPMR components. The FDB entries for reserved MAC addresses shall specify filtering for all Bridge Ports and all VIDs. Management shall not provide the capability to modify or remove entries for reserved MAC addresses. The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of propagation of PDUs within a Bridged Network, as follows: The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. PDUs transmitted using this destination address, or any other addresses that appear in Table 8-1, Table 8-2, and Table 8-3 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can therefore travel no further than those stations that can be reached via a single individual LAN from the originating station. The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an address that no conformant S-VLAN component, C-VLAN component, or MAC Bridge can forward; however, this address is relayed by a TPMR component. PDUs using this destination address, or any of the other addresses that appear in both Table 8-1 and Table 8-2 but not in Table 8-3 (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by any TPMRs but will propagate no further than the nearest S-VLAN component, C-VLAN component, or MAC Bridge. The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address that no conformant C-VLAN component, MAC Bridge can forward; however, it is relayed by TPMR components and S-VLAN components. PDUs using this destination address, or any of the other addresses that appear in Table 8-1 but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and S-VLAN components but will propagate no further than the nearest C-VLAN component or MAC Bridge. Because the LLC Entity associated with each Bridge Port is provided via CPU port, we must not filter these frames but forward them to CPU port. In a Bridge, the transmission Port is majorly decided by ingress and egress rules, FDB, and spanning tree Port State functions of the Forwarding Process. For link-local frames, only CPU port should be designated as destination port in the FDB, and the other functions of the Forwarding Process must not interfere with the decision of the transmission Port. We call this process trapping frames to CPU port. Therefore, on the switch with CPU port architecture, link-local frames must be trapped to CPU port, and certain link-local frames received by a Port of a Bridge comprising a TPMR component or an S-VLAN component must be excluded from it. A Bridge of the switch with CPU port architecture cannot comprise a Two-Port MAC Relay (TPMR) component as a TPMR component supports only a subset of the functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port doesn't count) of this architecture will either function as a standard MAC Bridge or a standard VLAN Bridge. Therefore, a Bridge of this architecture can only comprise S-VLAN components, C-VLAN components, or MAC Bridge components. Since there's no TPMR component, we don't need to relay PDUs using the destination addresses specified on the Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge section where they must be relayed by TPMR components. One option to trap link-local frames to CPU port is to add static FDB entries with CPU port designated as destination port. However, because that Independent VLAN Learning (IVL) is being used on every VID, each entry only applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC Bridge component or a C-VLAN component, there would have to be 16 times 4096 entries. This switch intellectual property can only hold a maximum of 2048 entries. Using this option, there also isn't a mechanism to prevent link-local frames from being discarded when the spanning tree Port State of the reception Port is discarding. The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 registers. Whilst this applies to every VID, it doesn't contain all of the reserved MAC addresses without affecting the remaining Standard Group MAC Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF destination addresses which may be relayed by MAC Bridges or VLAN Bridges. The latter option provides better but not complete conformance. This switch intellectual property also does not provide a mechanism to trap link-local frames with specific destination addresses to CPU port by Bridge, to conform to the filtering rules for the distinct Bridge components. Therefore, regardless of the type of the Bridge component, link-local frames with these destination addresses will be trapped to CPU port: 01-80-C2-00-00-[00,01,02,03,0E] In a Bridge comprising a MAC Bridge component or a C-VLAN component: Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] In a Bridge comprising an S-VLAN component: Link-local frames with these destination addresses will be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-00 Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A] Currently on this switch intellectual property, if the spanning tree Port State of the reception Port is discarding, link-local frames will be discarded. To trap link-local frames regardless of the spanning tree Port State, make the switch regard them as Bridge Protocol Data Units (BPDUs). This switch intellectual property only lets the frames regarded as BPDUs bypass the spanning tree Port State function of the Forwarding Process. With this change, the only remaining interference is the ingress rules. When the reception Port has no PVID assigned on software, VLAN-untagged frames won't be allowed in. There doesn't seem to be a mechanism on the switch intellectual property to have link-local frames bypass this function of the Forwarding Process. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reviewed-by: Daniel Golle Signed-off-by: Arınç ÜNAL Link: https://lore.kernel.org/r/20240409-b4-for-net-mt7530-fix-link-local-when-stp-discarding-v2-1-07b1150164ac@arinc9.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: sparx5: fix wrong config being used when reconfiguring PCS

2024-04-17T09:18:25+00:00

[ Upstream commit 33623113a48ea906f1955cbf71094f6aa4462e8f ] The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net/mlx5e: HTB, Fix inconsistencies with QoS SQs number

2024-04-17T09:18:25+00:00

[ Upstream commit 2f436f1869771d46e1a9f85738d5a1a7c5653a4e ] When creating a new HTB class while the interface is down, the variable that follows the number of QoS SQs (htb_max_qos_sqs) may not be consistent with the number of HTB classes. Previously, we compared these two values to ensure that the node_qid is lower than the number of QoS SQs, and we allocated stats for that SQ when they are equal. Change the check to compare the node_qid with the current number of leaf nodes and fix the checking conditions to ensure allocation of stats_list and stats for each node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Carolina Jubran Reviewed-by: Tariq Toukan Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mlx5e: Fix mlx5e_priv_init() cleanup flow

2024-04-17T09:18:25+00:00

[ Upstream commit ecb829459a841198e142f72fadab56424ae96519 ] When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e Fixes: 8bf30be75069 ("net/mlx5e: Introduce select queue parameters") Signed-off-by: Carolina Jubran Reviewed-by: Tariq Toukan Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net/mlx5: Properly link new fs rules into the tree

2024-04-17T09:18:25+00:00

[ Upstream commit 7c6782ad4911cbee874e85630226ed389ff2e453 ] Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de93712 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by: Cosmin Ratiu Reviewed-by: Tariq Toukan Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

octeontx2-af: Fix NIX SQ mode and BP config

2024-04-17T09:18:24+00:00

[ Upstream commit faf23006185e777db18912685922c5ddb2df383f ] NIX SQ mode and link backpressure configuration is required for all platforms. But in current driver this code is wrongly placed under specific platform check. This patch fixes the issue by moving the code out of platform check. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Geetha sowjanya Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

2024-04-17T09:18:24+00:00

[ Upstream commit be0384bf599cf1eb8d337517feeb732d71f75a6f ] The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin