kernel/linux.git/drivers/net, branch v5.2.16

rsi: fix a double free bug in rsi_91x_deinit()

2019-09-19T07:11:08+00:00

commit 8b51dc7291473093c821195c4b6af85fadedbc2f upstream. `dev` (struct rsi_91x_usbdev *) field of adapter (struct rsi_91x_usbdev *) is allocated and initialized in `rsi_init_usb_interface`. If any error is detected in information read from the device side, `rsi_init_usb_interface` will be freed. However, in the higher level error handling code in `rsi_probe`, if error is detected, `rsi_91x_deinit` is called again, in which `dev` will be freed again, resulting double free. This patch fixes the double free by removing the free operation on `dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also used in `rsi_disconnect`, in that code path, the `dev` field is not (and thus needs to be) freed. This bug was found in v4.19, but is also present in the latest version of kernel. Fixes CVE-2019-15504. Reported-by: Hui Peng Reported-by: Mathias Payer Signed-off-by: Hui Peng Reviewed-by: Guenter Roeck Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

mt76: mt7615: Use after free in mt7615_mcu_set_bcn()

2019-09-19T07:11:03+00:00

commit 9db1aec0c2d72a3b7b115ba56e8dbb5b46855333 upstream. We dereference "skb" when we assign: req.pkt_len = cpu_to_le16(MT_TXD_SIZE + skb->len); ^^^^^^^^ So this patch just moves the dev_kfree_skb() down a bit to avoid the use after free. Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Dan Carpenter Acked-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman

mt76: Fix a signedness bug in mt7615_add_interface()

2019-09-19T07:11:02+00:00

commit b1571a0e77d8cef14227af293c6dda1464a57270 upstream. The problem is that "mvif->omac_idx" is a u8 so it can't be negative and the error handling won't work. The get_omac_idx() function returns -1 on error. Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Signed-off-by: Dan Carpenter Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman

mt76: mt76x0e: disable 5GHz band for MT7630E

2019-09-19T07:10:58+00:00

commit 70702265a04aa0ce5a7bde77d13456209992b32f upstream. MT7630E hardware does support 5GHz, but we do not properly configure phy for 5GHz channels. Scanning at this band not only do not show any APs but also can hang the firmware. Since vendor reference driver do not support 5GHz we don't know how properly configure 5GHz channels. So disable this band for MT7630E . Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

Revert "rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"

2019-09-19T07:10:57+00:00

commit 13fa451568ab9e8b3074ef741477c7938c713c42 upstream. This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Cc: # v5.1+ Reported-and-tested-by: Sergey Maranchuk Signed-off-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ixgbe: Prevent u8 wrapping of ITR value to something less than 10us

2019-09-19T07:10:57+00:00

commit 377228accbbb8b9738f615d791aa803f41c067e0 upstream. There were a couple cases where the ITR value generated via the adaptive ITR scheme could exceed 126. This resulted in the value becoming either 0 or something less than 10. Switching back and forth between a value less than 10 and a value greater than 10 can cause issues as certain hardware features such as RSC to not function well when the ITR value has dropped that low. CC: stable@vger.kernel.org Fixes: b4ded8327fea ("ixgbe: Update adaptive ITR algorithm") Reported-by: Gregg Leventhal Signed-off-by: Alexander Duyck Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

ixgbe: fix double clean of Tx descriptors with xdp

2019-09-19T07:10:57+00:00

commit bf280c0387ebbf8eebad1036fca8f7b85ebfde32 upstream. Tx code doesn't clear the descriptors' status after cleaning. So, if the budget is larger than number of used elems in a ring, some descriptors will be accounted twice and xsk_umem_complete_tx will move prod_tail far beyond the prod_head breaking the completion queue ring. Fix that by limiting the number of descriptors to clean by the number of used descriptors in the Tx ring. 'ixgbe_clean_xdp_tx_irq()' function refactored to look more like 'ixgbe_xsk_clean_tx_ring()' since we're allowed to directly use 'next_to_clean' and 'next_to_use' indexes. CC: stable@vger.kernel.org Fixes: 8221c5eba8c1 ("ixgbe: add AF_XDP zero-copy Tx support") Signed-off-by: Ilya Maximets Tested-by: William Tu Tested-by: Eelco Chaudron Signed-off-by: Jeff Kirsher Signed-off-by: Greg Kroah-Hartman

tun: fix use-after-free when register netdev failed

2019-09-19T07:10:48+00:00

[ Upstream commit 77f22f92dff8e7b45c7786a430626d38071d4670 ] I got a UAF repport in tun driver when doing fuzzy test: [ 466.269490] ================================================================== [ 466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0 [ 466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699 [ 466.271810] [ 466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427 [ 466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 466.271838] Call Trace: [ 466.271858] dump_stack+0xca/0x13e [ 466.271871] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271890] print_address_description+0x79/0x440 [ 466.271906] ? vprintk_func+0x5e/0xf0 [ 466.271920] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271935] __kasan_report+0x15c/0x1df [ 466.271958] ? tun_chr_read_iter+0x2ca/0x2d0 [ 466.271976] kasan_report+0xe/0x20 [ 466.271987] tun_chr_read_iter+0x2ca/0x2d0 [ 466.272013] do_iter_readv_writev+0x4b7/0x740 [ 466.272032] ? default_llseek+0x2d0/0x2d0 [ 466.272072] do_iter_read+0x1c5/0x5e0 [ 466.272110] vfs_readv+0x108/0x180 [ 466.299007] ? compat_rw_copy_check_uvector+0x440/0x440 [ 466.299020] ? fsnotify+0x888/0xd50 [ 466.299040] ? __fsnotify_parent+0xd0/0x350 [ 466.299064] ? fsnotify_first_mark+0x1e0/0x1e0 [ 466.304548] ? vfs_write+0x264/0x510 [ 466.304569] ? ksys_write+0x101/0x210 [ 466.304591] ? do_preadv+0x116/0x1a0 [ 466.304609] do_preadv+0x116/0x1a0 [ 466.309829] do_syscall_64+0xc8/0x600 [ 466.309849] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.309861] RIP: 0033:0x4560f9 [ 466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 [ 466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127 [ 466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9 [ 466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003 [ 466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000 [ 466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10 [ 466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000 [ 466.323057] [ 466.323064] Allocated by task 2605: [ 466.335165] save_stack+0x19/0x80 [ 466.336240] __kasan_kmalloc.constprop.8+0xa0/0xd0 [ 466.337755] kmem_cache_alloc+0xe8/0x320 [ 466.339050] getname_flags+0xca/0x560 [ 466.340229] user_path_at_empty+0x2c/0x50 [ 466.341508] vfs_statx+0xe6/0x190 [ 466.342619] __do_sys_newstat+0x81/0x100 [ 466.343908] do_syscall_64+0xc8/0x600 [ 466.345303] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.347034] [ 466.347517] Freed by task 2605: [ 466.348471] save_stack+0x19/0x80 [ 466.349476] __kasan_slab_free+0x12e/0x180 [ 466.350726] kmem_cache_free+0xc8/0x430 [ 466.351874] putname+0xe2/0x120 [ 466.352921] filename_lookup+0x257/0x3e0 [ 466.354319] vfs_statx+0xe6/0x190 [ 466.355498] __do_sys_newstat+0x81/0x100 [ 466.356889] do_syscall_64+0xc8/0x600 [ 466.358037] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 466.359567] [ 466.360050] The buggy address belongs to the object at ffff888372139100 [ 466.360050] which belongs to the cache names_cache of size 4096 [ 466.363735] The buggy address is located 336 bytes inside of [ 466.363735] 4096-byte region [ffff888372139100, ffff88837213a100) [ 466.367179] The buggy address belongs to the page: [ 466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0 [ 466.371582] flags: 0x2fffff80010200(slab|head) [ 466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00 [ 466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 466.377778] page dumped because: kasan: bad access detected [ 466.379730] [ 466.380288] Memory state around the buggy address: [ 466.381844] ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.384009] ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.388257] ^ [ 466.390234] ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.392512] ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 466.394667] ================================================================== tun_chr_read_iter() accessed the memory which freed by free_netdev() called by tun_set_iff(): CPUA CPUB tun_set_iff() alloc_netdev_mqs() tun_attach() tun_chr_read_iter() tun_get() tun_do_read() tun_ring_recv() register_netdevice() <-- inject error goto err_detach tun_detach_all() <-- set RCV_SHUTDOWN free_netdev() <-- called from err_free_dev path netdev_freemem() <-- free the memory without check refcount (In this path, the refcount cannot prevent freeing the memory of dev, and the memory will be used by dev_put() called by tun_chr_read_iter() on CPUB.) (Break from tun_ring_recv(), because RCV_SHUTDOWN is set) tun_put() dev_put() <-- use the memory freed by netdev_freemem() Put the publishing of tfile->tun after register_netdevice(), so tun_get() won't get the tun pointer that freed by err_detach path if register_netdevice() failed. Fixes: eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice") Reported-by: Hulk Robot Suggested-by: Jason Wang Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: phylink: Fix flow control resolution

2019-09-19T07:10:44+00:00

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ] Regarding to IEEE 802.3-2015 standard section 2 28B.3 Priority resolution - Table 28-3 - Pause resolution In case of Local device Pause=1 AsymDir=0, Link partner Pause=1 AsymDir=1, Local device resolution should be enable PAUSE transmit, disable PAUSE receive. And in case of Local device Pause=1 AsymDir=1, Link partner Pause=1 AsymDir=0, Local device resolution should be enable PAUSE receive, disable PAUSE transmit. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Stefan Chulski Reported-by: Shaul Ben-Mayor Acked-by: Russell King Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ixgbevf: Fix secpath usage for IPsec Tx offload

2019-09-19T07:10:43+00:00

[ Upstream commit 8f6617badcc96a582678ea36ea96490c5ff26eb4 ] Port the same fix for ixgbe to ixgbevf. The ixgbevf driver currently does IPsec Tx offloading based on an existing secpath. However, the secpath can also come from the Rx side, in this case it is misinterpreted for Tx offload and the packets are dropped with a "bad sa_idx" error. Fix this by using the xfrm_offload() function to test for Tx offload. CC: Shannon Nelson Fixes: 7f68d4306701 ("ixgbevf: enable VF IPsec offload operations") Reported-by: Jonathan Tooker Signed-off-by: Jeff Kirsher Acked-by: Shannon Nelson Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman