kernel/linux.git/drivers/net, branch v5.18.2

net: ipa: compute proper aggregation limit

2022-06-06T06:48:54+00:00

commit c5794097b269f15961ed78f7f27b50e51766dec9 upstream. The aggregation byte limit for an endpoint is currently computed based on the endpoint's receive buffer size. However, some bytes at the front of each receive buffer are reserved on the assumption that--as with SKBs--it might be useful to insert data (such as headers) before what lands in the buffer. The aggregation byte limit currently doesn't take into account that reserved space, and as a result, aggregation could require space past that which is available in the buffer. Fix this by reducing the size used to compute the aggregation byte limit by the NET_SKB_PAD offset reserved for each receive buffer. Signed-off-by: Alex Elder Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf

2022-05-19T02:34:26+00:00

Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Reduce number of hardware offload retries from flowtable datapath which might hog system with retries, from Felix Fietkau. 2) Skip neighbour lookup for PPPoE device, fill_forward_path() already provides this and set on destination address from fill_forward_path for PPPoE device, also from Felix. 4) When combining PPPoE on top of a VLAN device, set info->outdev to the PPPoE device so software offload works, from Felix. 5) Fix TCP teardown flowtable state, races with conntrack gc might result in resetting the state to ESTABLISHED and the time to one day. Joint work with Oz Shlomo and Sven Auhagen. 6) Call dst_check() from flowtable datapath to check if dst is stale instead of doing it from garbage collector path. 7) Disable register tracking infrastructure, either user-space or kernel need to pre-fetch keys inconditionally, otherwise register tracking assumes data is already available in register that might not well be there, leading to incorrect reductions. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: disable expression reduction infra netfilter: flowtable: move dst_check to packet path netfilter: flowtable: fix TCP flow teardown netfilter: nft_flow_offload: fix offload with pppoe + vlan net: fix dev_fill_forward_path with pppoe + bridge netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices netfilter: flowtable: fix excessive hw offload attempts after failure ==================== Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski

net: ftgmac100: Disable hardware checksum on AST2600

2022-05-18T13:03:30+00:00

The AST2600 when using the i210 NIC over NC-SI has been observed to produce incorrect checksum results with specific MTU values. This was first observed when sending data across a long distance set of networks. On a local network, the following test was performed using a 1MB file of random data. On the receiver run this script: #!/bin/bash while [ 1 ]; do # Zero the stats nstat -r > /dev/null nc -l 9899 > test-file # Check for checksum errors TcpInCsumErrors=$(nstat | grep TcpInCsumErrors) if [ -z "$TcpInCsumErrors" ]; then echo No TcpInCsumErrors else echo TcpInCsumErrors = $TcpInCsumErrors fi done On an AST2600 system: # nc 9899 < test-file The test was repeated with various MTU values: # ip link set mtu 1410 dev eth0 The observed results: 1500 - good 1434 - bad 1400 - good 1410 - bad 1420 - good The test was repeated after disabling tx checksumming: # ethtool -K eth0 tx-checksumming off And all MTU values tested resulted in transfers without error. An issue with the driver cannot be ruled out, however there has been no bug discovered so far. David has done the work to take the original bug report of slow data transfer between long distance connections and triaged it down to this test case. The vendor suspects this this is a hardware issue when using NC-SI. The fixes line refers to the patch that introduced AST2600 support. Reported-by: David Wilder Reviewed-by: Dylan Hung Signed-off-by: Joel Stanley Signed-off-by: David S. Miller

igb: skip phy status check where unavailable

2022-05-18T13:00:51+00:00

igb_read_phy_reg() will silently return, leaving phy_data untouched, if hw->ops.read_reg isn't set. Depending on the uninitialized value of phy_data, this led to the phy status check either succeeding immediately or looping continuously for 2 seconds before emitting a noisy err-level timeout. This message went out to the console even though there was no actual problem. Instead, first check if there is read_reg function pointer. If not, proceed without trying to check the phy status register. Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition") Signed-off-by: Kevin Mitchell Tested-by: Gurucharan (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller

Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue

2022-05-18T11:59:36+00:00

Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-05-17 This series contains updates to ice driver only. Arkadiusz prevents writing of timestamps when rings are being configured to resolve null pointer dereference. Paul changes a delayed call to baseline statistics to occur immediately which was causing misreporting of statistics due to the delay. Michal fixes incorrect restoration of interrupt moderation settings. ==================== Signed-off-by: David S. Miller

net/mlx5: Drain fw_reset when removing device

2022-05-18T06:03:57+00:00

In case fw sync reset is called in parallel to device removal, device might stuck in the following deadlock: CPU 0 CPU 1 ----- ----- remove_one uninit_one (locks intf_state_mutex) mlx5_sync_reset_now_event() work in fw_reset->wq. mlx5_enter_error_state() mutex_lock (intf_state_mutex) cleanup_once fw_reset_cleanup() destroy_workqueue(fw_reset->wq) Drain the fw_reset WQ, and make sure no new work is being queued, before entering uninit_one(). The Drain is done before devlink_unregister() since fw_reset, in some flows, is using devlink API devlink_remote_reload_actions_performed(). Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5e: CT: Fix setting flow_source for smfs ct tuples

2022-05-18T06:03:56+00:00

Cited patch sets flow_source to ANY overriding the provided spec flow_source, avoiding the optimization done by commit c9c079b4deaa ("net/mlx5: CT: Set flow source hint from provided tuple device"). To fix the above, set the dr_rule flow_source from provided flow spec. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey Reviewed-by: Oz Shlomo Signed-off-by: Saeed Mahameed

net/mlx5e: CT: Fix support for GRE tuples

2022-05-18T06:03:56+00:00

cited commit removed support for GRE tuples when software steering was enabled. To bring back support for GRE tuples, add GRE ipv4/ipv6 matchers. Fixes: 3ee61ebb0df1 ("net/mlx5: CT: Add software steering ct flow steering provider") Signed-off-by: Paul Blakey Reviewed-by: Oz Shlomo Signed-off-by: Saeed Mahameed

net/mlx5e: Remove HW-GRO from reported features

2022-05-18T06:03:56+00:00

We got reports of certain HW-GRO flows causing kernel call traces, which might be related to firmware. To be on the safe side, disable the feature for now and re-enable it once a driver/firmware fix is found. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed

net/mlx5e: Properly block HW GRO when XDP is enabled

2022-05-18T06:03:55+00:00

HW GRO is incompatible and mutually exclusive with XDP and XSK. However, the needed checks are only made when enabling XDP. If HW GRO is enabled when XDP is already active, the command will succeed, and XDP will be skipped in the data path, although still enabled. This commit fixes the bug by checking the XDP and XSK status in mlx5e_fix_features and disabling HW GRO if XDP is enabled. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Maxim Mikityanskiy Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed