kernel/linux.git/drivers/net, branch v5.10.261

net: ethernet: rmnet: Always subtract MAP header

2026-07-24T13:49:23+00:00

commit 8b8701d0b4925807a6d4dc4699cb80a1e16218ad upstream. Commit e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload") broke ingress handling for devices where RMNET_FLAGS_INGRESS_MAP_CKSUMV5 or RMNET_FLAGS_INGRESS_MAP_CKSUMV4 are not set. Unless either of these flags are set, the MAP header is not removed. This commit restores the original logic by ensuring that the MAP header is removed for all MAP packets. Fixes: e1d9a90a9bfd ("net: ethernet: rmnet: Support for ingress MAPv5 checksum offload") Signed-off-by: Kristian Evensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

wifi: mwifiex: fix permanently busy scans after multiple roam iterations

2026-07-24T13:49:16+00:00

commit d78a407bad6f500884a8606aea1a5a9207be4030 upstream. In order for the firmware to sleep, the driver has to confirm a previously received sleep request. The normal sequence of evets goes like this: EVENT_SLEEP -> adapter->ps_state = PS_STATE_PRE_SLEEP -> sleep-confirm -> SLEEP -> EVENT_AWAKE -> AWAKE. Before sending the sleep-confirm command, the driver must make sure there are no commands either running or waiting to be completed. mwifiex_ret_802_11_associate() unconditionally sets ps_state = PS_STATE_AWAKE when it processes the association command response, outside of the normal powersave management flow. If EVENT_SLEEP arrives while the association command is in flight, ps_state is PRE_SLEEP when the association command response is parsed, and the forced AWAKE overwrites it. The deferred sleep-confirm is never sent. A subsequent scan_start command is correctly acknowledged, but the firmware doesn't generate scan_result events. The scan request never finishes, and additional requests from userspace fail with -EBUSY. After testing on both IW412 and W8997, I could only trigger the bug on the IW412 and observed the firmwares behave differently. On the IW412 the firmware still sends EVENT_SLEEP while the authentication / association process is ongoing. A W8997 under the same conditions seems to suppress power-save for the duration of the association, so PRE_SLEEP never coincided with the association response even after extended periods of testing using the loops described below (>12hours). On the IW412, the delay between commands that triggers an EVENT_SLEEP was empirically determined to be ~20ms. This delay can naturally occur when the driver is outputting debugging information (debug_mask = 0x00000037), in which situation the busy scans issue is repeatable while running "test 1)" as described below. If the delay between commands is less than ~20ms, the firmware stays awake and the issue was not reproducible running the same test. The host_mlme=false path also behaves differently. In this case, the entire authentication / association transaction is executed by one command (HostCmd_CMD_802_11_ASSOCIATE), and the firmware doesn't emit EVENT_SLEEP while the command is running. Remove the assignment so the ps_state is only manipulated in the paths that are related to powersave event handling and on the main workqueue for correct sleep confirmation. The following loop tests were performed (with debugging output enabled): 1) force roaming between two AP's, one 5GHz and one 2.4GHz, same SSID. Use wpa_cli to trigger the roaming behavior, sleep 2s between iterations. 2) force a disconnection to AP 1 and a connection to AP 2, test scan. Use wpa_cli to trigger the connection changes, sleep 2s between iterations. Each test ran in each device for at least 3 hours. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Rafael Beims Reviewed-by: Jeff Chen Link: https://patch.msgid.link/20260612122547.1586872-2-rafael@beims.me Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

macsec: fix promiscuity refcount leak in macsec_dev_open()

2026-07-24T13:49:16+00:00

commit 7410d11460eb90d6c9281162ccc6a128534d897d upstream. When a MACsec interface with IFF_PROMISC set is brought up on top of a device that has hardware offload enabled, macsec_dev_open() first calls dev_set_promiscuity(real_dev, 1) and then propagates the open to the offload device. If that propagation fails, the error path jumps to the clear_allmulti label, which only reverts allmulti and the unicast address. The promiscuity taken on the lower device is never dropped, so real_dev is left permanently stuck in promiscuous mode. Its promiscuity count can no longer be balanced from software. Add a clear_promisc label that drops the promiscuity reference and route the two offload failure paths to it. The dev_set_promiscuity() failure itself still jumps to clear_allmulti, since on that failure the count was not incremented. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Cc: stable@vger.kernel.org Signed-off-by: James Raphael Tiovalen Reviewed-by: Sabrina Dubroca Link: https://patch.msgid.link/20260705113629.187490-1-jamestiotio@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

wifi: rt2x00: avoid full teardown before work setup in probe

2026-07-24T13:49:16+00:00

commit 536fb3d739d75a03cb318c0c6fe799425cfea501 upstream. rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. Fixes: 1ebbc48520a0 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.") Fixes: 0439f5367c8d ("rt2x00: Move TX/RX work into dedicated workqueue") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

fsl/fman: Free init resources on KeyGen failure in fman_init()

2026-07-24T13:49:15+00:00

commit d288efa2b94abc2e45a061fceb156b4f4e5b37be upstream. fman_muram_alloc() allocates initialization resources before initializing the KeyGen block. If keygen_init() fails, the function returns -EINVAL directly and leaves those resources allocated. Free the initialization resources before returning from the KeyGen failure path. Fixes: 7472f4f281d0 ("fsl/fman: enable FMan Keygen") Cc: stable@kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Pavan Chebbi Reviewed-by: Breno Leitao Link: https://patch.msgid.link/20260625004834.3394389-1-haoxiang_li2024@163.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

net: liquidio: fix BAR resource leak on PF number failure

2026-07-24T13:49:15+00:00

commit c63ee62a3c4ac1a1542f4c1a4b87e2f41df5a496 upstream. If cn23xx_get_pf_num() fails, the function returns without unmapping either BAR. Unmap both BARs before returning from the error path. Found by manual code review. Fixes: 0c45d7fe12c7 ("liquidio: fix use of pf in pass-through mode in a virtual machine") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li Reviewed-by: Larysa Zaremba Link: https://patch.msgid.link/20260624064013.2809570-1-haoxiang_li2024@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bnx2x: fix potential memory leak in bnx2x_alloc_mem_bp()

2026-07-24T13:49:15+00:00

commit a986fde914d88af47eb78fd29c5d1af7952c3500 upstream. If the allocation of fp[i].tpa_info fails, the error path will not free the struct bnx2x_fastpath allocated earlier, as it is not linked to the bp structure yet. Fix that by linking it immediately after allocation. Cc: stable@vger.kernel.org Fixes: 15192a8cf8a8 ("bnx2x: Split the FP structure") Signed-off-by: Abdun Nihaal Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260620062402.89549-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit

2026-07-24T13:49:14+00:00

commit 6d7f7bcf225b2d566176bf6229dbd1252940cb3c upstream. ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Cc: stable@vger.kernel.org Signed-off-by: Shitalkumar Gandhi Reviewed-by: Simon Horman Link: https://lore.kernel.org/20260520105750.30144-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman

ieee802154: ca8210: fix cas_ctl leak on spi_async failure

2026-07-24T13:49:14+00:00

commit e09390e439bd7cca30dd10893b1f64802961667a upstream. ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync(). Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Cc: stable@vger.kernel.org Signed-off-by: Shitalkumar Gandhi Reviewed-by: Miquel Raynal Link: https://lore.kernel.org/20260421073259.2259783-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Stefan Schmidt Signed-off-by: Greg Kroah-Hartman

net: ena: clean up XDP TX queues when regular TX setup fails

2026-07-24T13:49:14+00:00

commit 1bd6676254b4ab6acd44b662b5e92822c036463a upstream. create_queues_with_size_backoff() creates XDP TX queues before setting up the regular TX path. If the subsequent allocation or creation of regular TX queues fails, the error handling paths omit the teardown of the XDP TX queues, leading to a resource leak. Fix this by explicitly destroying the XDP TX queue subset at the two missing failure points. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc7. An x86_64 allyesconfig build showed no new warnings. As we do not have an ENA device to test with, no runtime testing was able to be performed. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Cc: stable@vger.kernel.org Signed-off-by: Dawei Feng Reviewed-by: Arthur Kiyanovski Tested-by: Arthur Kiyanovski Link: https://patch.msgid.link/20260616142424.4005130-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman