kernel/linux.git/drivers/net, branch v4.14.263

gianfar: fix jumbo packets+napi+rx overrun crash

2022-01-27T08:01:02+00:00

commit d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f upstream. When using jumbo packets and overrunning rx queue with napi enabled, the following sequence is observed in gfar_add_rx_frag: | lstatus | | skb | t | lstatus, size, flags | first | len, data_len, *ptr | ---+--------------------------------------+-------+-----------------------+ 13 | 18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000, f554c12e | 12 | 10000640, 1600, INTERRUPT | 0 | 8000, 6400, f554c12e | 11 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, f554c12e | 10 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, f554c12e | 09 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, f554c12e | 08 | 14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0, f554c12e | 07 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, f554c12e | 06 | 1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0, abf3bd6e | 05 | 18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400, c5a57780 | 04 | 10000640, 1600, INTERRUPT | 0 | 6400, 4800, c5a57780 | 03 | 10000640, 1600, INTERRUPT | 0 | 4800, 3200, c5a57780 | 02 | 10000640, 1600, INTERRUPT | 0 | 3200, 1600, c5a57780 | 01 | 10000640, 1600, INTERRUPT | 0 | 1600, 0, c5a57780 | 00 | 14000640, 1600, INTERRUPT FIRST | 1 | 0, 0, c5a57780 | So at t=7 a new packets is started but not finished, probably due to rx overrun - but rx overrun is not indicated in the flags. Instead a new packets starts at t=8. This results in skb->len to exceed size for the LAST fragment at t=13 and thus a negative fragment size added to the skb. This then crashes: kernel BUG at include/linux/skbuff.h:2277! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c04689f4] skb_pull+0x2c/0x48 LR [c03f62ac] gfar_clean_rx_ring+0x2e4/0x844 Call Trace: [ec4bfd38] [c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable) [ec4bfda8] [c03f6a44] gfar_poll_rx_sq+0x48/0xe4 [ec4bfdc8] [c048d504] __napi_poll+0x54/0x26c [ec4bfdf8] [c048d908] net_rx_action+0x138/0x2c0 [ec4bfe68] [c06a8f34] __do_softirq+0x3a4/0x4fc [ec4bfed8] [c0040150] run_ksoftirqd+0x58/0x70 [ec4bfee8] [c0066ecc] smpboot_thread_fn+0x184/0x1cc [ec4bff08] [c0062718] kthread+0x140/0x144 [ec4bff38] [c0012350] ret_from_kernel_thread+0x14/0x1c This patch fixes this by checking for computed LAST fragment size, so a negative sized fragment is never added. In order to prevent the newer rx frame from getting corrupted, the FIRST flag is checked to discard the incomplete older frame. Signed-off-by: Michael Braun Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

gianfar: simplify FCS handling and fix memory leak

2022-01-27T08:01:02+00:00

commit d903ec77118c09f93a610b384d83a6df33a64fe6 upstream. Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer Signed-off-by: Jim Gruen Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

lib82596: Fix IRQ check in sni_82596_probe

2022-01-27T08:01:01+00:00

commit 99218cbf81bf21355a3de61cd46a706d36e900e6 upstream. platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: 115978859272 ("i825xx: Move the Intel 82586/82593/82596 based drivers") Signed-off-by: Miaoqian Lin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

bcmgenet: add WOL IRQ check

2022-01-27T08:01:01+00:00

commit 9deb48b53e7f4056c2eaa2dc2ee3338df619e4f6 upstream. The driver neglects to check the result of platform_get_irq_optional()'s call and blithely passes the negative error codes to devm_request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL. Stop calling devm_request_irq() with the invalid IRQ #s. Fixes: 8562056f267d ("net: bcmgenet: request Wake-on-LAN interrupt") Signed-off-by: Sergey Shtylyov Acked-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

libcxgb: Don't accidentally set RTO_ONLINK in cxgb_find_route()

2022-01-27T08:01:00+00:00

commit a915deaa9abe4fb3a440312c954253a6a733608e upstream. Mask the ECN bits before calling ip_route_output_ports(). The tos variable might be passed directly from an IPv4 header, so it may have the last ECN bit set. This interferes with the route lookup process as ip_route_output_key_hash() interpretes this bit specially (to restrict the route scope). Found by code inspection, compile tested only. Fixes: 804c2f3e36ef ("libcxgb,iw_cxgb4,cxgbit: add cxgb_find_route()") Signed-off-by: Guillaume Nault Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: axienet: fix number of TX ring slots for available check

2022-01-27T08:01:00+00:00

commit aba57a823d2985a2cc8c74a2535f3a88e68d9424 upstream. The check for the number of available TX ring slots was off by 1 since a slot is required for the skb header as well as each fragment. This could result in overwriting a TX ring slot that was still in use. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: axienet: Wait for PhyRstCmplt after core reset

2022-01-27T08:01:00+00:00

commit b400c2f4f4c53c86594dd57098970d97d488bfde upstream. When resetting the device, wait for the PhyRstCmplt bit to be set in the interrupt status register before continuing initialization, to ensure that the core is actually ready. When using an external PHY, this also ensures we do not start trying to access the PHY while it is still in reset. The PHY reset is initiated by the core reset which is triggered just above, but remains asserted for 5ms after the core is reset according to the documentation. The MgtRdy bit could also be waited for, but unfortunately when using 7-series devices, the bit does not appear to work as documented (it seems to behave as some sort of link state indication and not just an indication the transceiver is ready) so it can't really be relied on for this purpose. Fixes: 8a3b7a252dca9 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Robert Hancock Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/fsl: xgmac_mdio: Fix incorrect iounmap when removing module

2022-01-27T08:01:00+00:00

commit 3f7c239c7844d2044ed399399d97a5f1c6008e1b upstream. As reported by sparse: In the remove path, the driver would attempt to unmap its own priv pointer - instead of the io memory that it mapped in probe. Fixes: 9f35a7342cff ("net/fsl: introduce Freescale 10G MDIO driver") Signed-off-by: Tobias Waldekranz Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: Increase the scan timeout guard to 30 seconds

2022-01-27T08:00:59+00:00

commit ced50f1133af12f7521bb777fcf4046ca908fb77 upstream. With the introduction of 6GHz channels the scan guard timeout should be adjusted to account for the following extreme case: - All 6GHz channels are scanned passively: 58 channels. - The scan is fragmented with the following parameters: 3 fragments, 95 TUs suspend time, 44 TUs maximal out of channel time. The above would result with scan time of more than 24 seconds. Thus, set the timeout to 30 seconds. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer Signed-off-by: Luca Coelho Link: https://lore.kernel.org/r/iwlwifi.20211210090244.3c851b93aef5.I346fa2e1d79220a6770496e773c6f87a2ad9e6c4@changeid Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

net: phy: marvell: configure RGMII delays for 88E1118

2022-01-27T08:00:57+00:00

[ Upstream commit f22725c95ececb703c3f741e8f946d23705630b7 ] Corentin Labbe reports that the SSI 1328 does not work when allowing the PHY to operate at gigabit speeds, but does work with the generic PHY driver. This appears to be because m88e1118_config_init() writes a fixed value to the MSCR register, claiming that this is to enable 1G speeds. However, this always sets bits 4 and 5, enabling RGMII transmit and receive delays. The suspicion is that the original board this was added for required the delays to make 1G speeds work. Add the necessary configuration for RGMII delays for the 88E1118 to bring this into line with the requirements for RGMII support, and thus make the SSI 1328 work. Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502. Reported-by: Corentin Labbe Tested-by: Corentin Labbe Signed-off-by: Russell King (Oracle) Reviewed-by: Andrew Lunn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin