kernel/linux.git/drivers/net, branch v3.4.84

can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails

2014-03-24T04:37:07+00:00

commit 7e9e148af01ef388efb6e2490805970be4622792 upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman

vmxnet3: fix building without CONFIG_PCI_MSI

2014-03-24T04:37:07+00:00

commit 0a8d8c446b5429d15ff2d48f46e00d8a08552303 upstream. Since commit d25f06ea466e "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by: Arnd Bergmann Cc: Neil Horman Cc: Shreyas Bhatewara Cc: "VMware, Inc." Cc: "David S. Miller" Acked-by: Neil Horman Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vmxnet3: fix netpoll race condition

2014-03-24T04:37:07+00:00

commit d25f06ea466ea521b563b76661180b4e44714ae6 upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by: Neil Horman CC: Shreyas Bhatewara CC: "VMware, Inc." CC: "David S. Miller" Reviewed-by: Shreyas N Bhatewara Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

mwifiex: copy AP's HT capability info correctly

2014-03-24T04:37:04+00:00

commit c99b1861c232e1f641f13b8645e0febb3712cc71 upstream. While preparing association request, intersection of device's HT capability information and corresponding fields advertised by AP is used. This patch fixes an error while copying this field from AP's beacon. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

ath9k: Fix ETSI compliance for AR9462 2.0

2014-03-24T04:37:04+00:00

commit b3050248c167871ca52cfdb2ce78aa2460249346 upstream. The minimum CCA power threshold values have to be adjusted for existing cards to be in compliance with new regulations. Newer cards will make use of the values obtained from EEPROM, support for this was added earlier. To make sure that cards that are already in use and don't have proper values in EEPROM, do not violate regulations, use the initvals instead. Reported-by: Jeang Daniel Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

tg3: Don't check undefined error bits in RXBD

2014-03-24T04:37:04+00:00

[ Upstream commit d7b95315cc7f441418845a165ee56df723941487 ] Redefine the RXD_ERR_MASK to include only relevant error bits. This fixes a customer reported issue of randomly dropping packets on the 5719. Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

virtio-net: alloc big buffers also when guest can receive UFO

2014-03-24T04:37:03+00:00

[ Upstream commit 0e7ede80d929ff0f830c44a543daa1acd590c749 ] We should alloc big buffers also when guest can receive UFO packets to let the big packets fit into guest rx buffer. Fixes 5c5167515d80f78f6bb538492c423adcae31ad65 (virtio-net: Allow UFO feature to be set and advertised.) Cc: Rusty Russell Cc: Michael S. Tsirkin Cc: Sridhar Samudrala Signed-off-by: Jason Wang Acked-by: Michael S. Tsirkin Acked-by: Rusty Russell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: asix: add missing flag to struct driver_info

2014-03-11T23:10:11+00:00

commit d43ff4cd798911736fb39025ec8004284b1b0bc2 upstream. The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: Emil Goode Reported-by: Bjørn Mork Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: asix: handle packets crossing URB boundaries

2014-03-11T23:10:10+00:00

commit 8b5b6f5413e97c3e8bafcdd67553d508f4f698cd upstream. ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet header may now cross URB boundaries. To handle this we have to introduce some state between individual calls to asix_rx_fixup(). Signed-off-by: Lucas Stach Signed-off-by: David S. Miller [ Emil: backported to 3.4: dropped changes to drivers/net/usb/ax88172a.c ] Signed-off-by: Emil Goode Signed-off-by: Greg Kroah-Hartman

rtlwifi: Fix endian error in extracting packet type

2014-03-11T23:10:10+00:00

commit 0c5d63f0ab6728f05ddefa25aff55e31297f95e6 upstream. All of the rtlwifi drivers have an error in the routine that tests if the data is "special". If it is, the subsequant transmission will be at the lowest rate to enhance reliability. The 16-bit quantity is big-endian, but was being extracted in native CPU mode. One of the effects of this bug is to inhibit association under some conditions as the TX rate is too high. Based on suggestions by Joe Perches, the entire routine is rewritten. One of the local headers contained duplicates of some of the ETH_P_XXX definitions. These are deleted. Signed-off-by: Larry Finger Cc: Mark Cave-Ayland Signed-off-by: John W. Linville [wujg: Backported to 3.4: - adjust context - remove rtlpriv->enter_ps = false - use schedule_work(&rtlpriv->works.lps_leave_work)] Signed-off-by: Jianguo Wu Signed-off-by: Greg Kroah-Hartman