kernel/linux.git/drivers/net, branch linux-5.9.y

net: stmmac: increase the timeout for dma reset

2020-12-21T12:28:18+00:00

[ Upstream commit 9d14edfdeabf37d8d8f045e63e5873712aadcd6b ] Current timeout value is not enough for gmac5 dma reset on imx8mp platform, increase the timeout range. Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

lan743x: fix for potential NULL pointer dereference with bare card

2020-12-21T12:28:18+00:00

[ Upstream commit e9e13b6adc338be1eb88db87bcb392696144bd02 ] This is the 3rd revision of the patch fix for potential null pointer dereference with lan743x card. The simpliest way to reproduce: boot with bare lan743x and issue "ethtool ethN" commant where ethN is the interface with lan743x card. Example: $ sudo ethtool eth7 dmesg: [ 103.510336] BUG: kernel NULL pointer dereference, address: 0000000000000340 ... [ 103.510836] RIP: 0010:phy_ethtool_get_wol+0x5/0x30 [libphy] ... [ 103.511629] Call Trace: [ 103.511666] lan743x_ethtool_get_wol+0x21/0x40 [lan743x] [ 103.511724] dev_ethtool+0x1507/0x29d0 [ 103.511769] ? avc_has_extended_perms+0x17f/0x440 [ 103.511820] ? tomoyo_init_request_info+0x84/0x90 [ 103.511870] ? tomoyo_path_number_perm+0x68/0x1e0 [ 103.511919] ? tty_insert_flip_string_fixed_flag+0x82/0xe0 [ 103.511973] ? inet_ioctl+0x187/0x1d0 [ 103.512016] dev_ioctl+0xb5/0x560 [ 103.512055] sock_do_ioctl+0xa0/0x140 [ 103.512098] sock_ioctl+0x2cb/0x3c0 [ 103.512139] __x64_sys_ioctl+0x84/0xc0 [ 103.512183] do_syscall_64+0x33/0x80 [ 103.512224] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 103.512274] RIP: 0033:0x7f54a9cba427 ... Previous versions can be found at: v1: initial version https://lkml.org/lkml/2020/10/28/921 v2: do not return from lan743x_ethtool_set_wol if netdev->phydev == NULL, just skip the call of phy_ethtool_set_wol() instead. https://lkml.org/lkml/2020/10/31/380 v3: in function lan743x_ethtool_set_wol: use ternary operator instead of if-else sentence (review by Markus Elfring) return -ENETDOWN insted of -EIO (review by Andrew Lunn) Signed-off-by: Sergej Bauer Link: https://lore.kernel.org/r/20201101223556.16116-1-sbauer@blackbox.su Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

bonding: fix feature flag setting at init time

2020-12-21T12:28:18+00:00

[ Upstream commit 007ab5345545aba2f9cbe4c096cc35d2fd3275ac ] Don't try to adjust XFRM support flags if the bond device isn't yet registered. Bad things can currently happen when netdev_change_features() is called without having wanted_features fully filled in yet. This code runs both on post-module-load mode changes, as well as at module init time, and when run at module init time, it is before register_netdevice() has been called and filled in wanted_features. The empty wanted_features led to features also getting emptied out, which was definitely not the intended behavior, so prevent that from happening. Originally, I'd hoped to stop adjusting wanted_features at all in the bonding driver, as it's documented as being something only the network core should touch, but we actually do need to do this to properly update both the features and wanted_features fields when changing the bond type, or we get to a situation where ethtool sees: esp-hw-offload: off [requested on] I do think we should be using netdev_update_features instead of netdev_change_features here though, so we only send notifiers when the features actually changed. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Reported-by: Ivan Vecera Suggested-by: Ivan Vecera Cc: Jay Vosburgh Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Jarod Wilson Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net/mlx4_en: Handle TX error CQE

2020-12-21T12:28:18+00:00

[ Upstream commit ba603d9d7b1215c72513d7c7aa02b6775fd4891b ] In case error CQE was found while polling TX CQ, the QP is in error state and all posted WQEs will generate error CQEs without any data transmitted. Fix it by reopening the channels, via same method used for TX timeout handling. In addition add some more info on error CQE and WQE for debug. Fixes: bd2f631d7c60 ("net/mlx4_en: Notify user when TX ring in error state") Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net/mlx4_en: Avoid scheduling restart task if it is already running

2020-12-21T12:28:17+00:00

[ Upstream commit fed91613c9dd455dd154b22fa8e11b8526466082 ] Add restarting state flag to avoid scheduling another restart task while such task is already running. Change task name from watchdog_task to restart_task to better fit the task role. Fixes: 1e338db56e5a ("mlx4_en: Fix a race at restart task") Signed-off-by: Moshe Shemesh Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

e1000e: fix S0ix flow to allow S0i3.2 subset entry

2020-12-21T12:28:17+00:00

[ Upstream commit a379b01cd4b2aa3f12786b281a714871574e5ccb ] Changed a configuration in the flows to align with architecture requirements to achieve S0i3.2 substate. This helps both i219V and i219LM configurations. Also fixed a typo in the previous commit 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Fixes: 632fbd5eb5b0 ("e1000e: fix S0ix flows for cable connected case"). Signed-off-by: Vitaly Lifshits Tested-by: Aaron Brown Signed-off-by: Tony Nguyen Reviewed-by: Alexander Duyck Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20201208185632.151052-1-mario.limonciello@dell.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: ll_temac: Fix potential NULL dereference in temac_probe()

2020-12-21T12:28:17+00:00

[ Upstream commit cc6596fc7295e9dcd78156ed42f9f8e1221f7530 ] platform_get_resource() may fail and in this case a NULL dereference will occur. Fix it to use devm_platform_ioremap_resource() instead of calling platform_get_resource() and devm_ioremap(). This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = $platform_get_resource\|platform_get_resource_byname$(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Zhang Changzhong Acked-by: Esben Haabendal Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: stmmac: overwrite the dma_cap.addr64 according to HW design

2020-12-21T12:28:16+00:00

[ Upstream commit f119cc9818eb33b66e977ad3af75aef6500bbdc3 ] The current IP register MAC_HW_Feature1[ADDR64] only defines 32/40/64 bit width, but some SOCs support others like i.MX8MP support 34 bits but it maps to 40 bits width in MAC_HW_Feature1[ADDR64]. So overwrite dma_cap.addr64 according to HW real design. Fixes: 94abdad6974a ("net: ethernet: dwmac: add ethernet glue logic for NXP imx8 chip") Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: stmmac: delete the eee_ctrl_timer after napi disabled

2020-12-21T12:28:16+00:00

[ Upstream commit 5f58591323bf3f342920179f24515935c4b5fd60 ] There have chance to re-enable the eee_ctrl_timer and fire the timer in napi callback after delete the timer in .stmmac_release(), which introduces to access eee registers in the timer function after clocks are disabled then causes system hang. Found this issue when do suspend/resume and reboot stress test. It is safe to delete the timer after napi disabled and disable lpi mode. Fixes: d765955d2ae0b ("stmmac: add the Energy Efficient Ethernet support") Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

net: stmmac: free tx skb buffer in stmmac_resume()

2020-12-21T12:28:16+00:00

[ Upstream commit 4ec236c7c51f89abb0224a4da4a6b77f9beb6600 ] When do suspend/resume test, there have WARN_ON() log dump from stmmac_xmit() funciton, the code logic: entry = tx_q->cur_tx; first_entry = entry; WARN_ON(tx_q->tx_skbuff[first_entry]); In normal case, tx_q->tx_skbuff[txq->cur_tx] should be NULL because the skb should be handled and freed in stmmac_tx_clean(). But stmmac_resume() reset queue parameters like below, skb buffers may not be freed. tx_q->cur_tx = 0; tx_q->dirty_tx = 0; So free tx skb buffer in stmmac_resume() to avoid warning and memory leak. log: [ 46.139824] ------------[ cut here ]------------ [ 46.144453] WARNING: CPU: 0 PID: 0 at drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3235 stmmac_xmit+0x7a0/0x9d0 [ 46.154969] Modules linked in: crct10dif_ce vvcam(O) flexcan can_dev [ 46.161328] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 5.4.24-2.1.0+g2ad925d15481 #1 [ 46.170369] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 46.175677] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 46.180465] pc : stmmac_xmit+0x7a0/0x9d0 [ 46.184387] lr : dev_hard_start_xmit+0x94/0x158 [ 46.188913] sp : ffff800010003cc0 [ 46.192224] x29: ffff800010003cc0 x28: ffff000177e2a100 [ 46.197533] x27: ffff000176ef0840 x26: ffff000176ef0090 [ 46.202842] x25: 0000000000000000 x24: 0000000000000000 [ 46.208151] x23: 0000000000000003 x22: ffff8000119ddd30 [ 46.213460] x21: ffff00017636f000 x20: ffff000176ef0cc0 [ 46.218769] x19: 0000000000000003 x18: 0000000000000000 [ 46.224078] x17: 0000000000000000 x16: 0000000000000000 [ 46.229386] x15: 0000000000000079 x14: 0000000000000000 [ 46.234695] x13: 0000000000000003 x12: 0000000000000003 [ 46.240003] x11: 0000000000000010 x10: 0000000000000010 [ 46.245312] x9 : ffff00017002b140 x8 : 0000000000000000 [ 46.250621] x7 : ffff00017636f000 x6 : 0000000000000010 [ 46.255930] x5 : 0000000000000001 x4 : ffff000176ef0000 [ 46.261238] x3 : 0000000000000003 x2 : 00000000ffffffff [ 46.266547] x1 : ffff000177e2a000 x0 : 0000000000000000 [ 46.271856] Call trace: [ 46.274302] stmmac_xmit+0x7a0/0x9d0 [ 46.277874] dev_hard_start_xmit+0x94/0x158 [ 46.282056] sch_direct_xmit+0x11c/0x338 [ 46.285976] __qdisc_run+0x118/0x5f0 [ 46.289549] net_tx_action+0x110/0x198 [ 46.293297] __do_softirq+0x120/0x23c [ 46.296958] irq_exit+0xb8/0xd8 [ 46.300098] __handle_domain_irq+0x64/0xb8 [ 46.304191] gic_handle_irq+0x5c/0x148 [ 46.307936] el1_irq+0xb8/0x180 [ 46.311076] cpuidle_enter_state+0x84/0x360 [ 46.315256] cpuidle_enter+0x34/0x48 [ 46.318829] call_cpuidle+0x18/0x38 [ 46.322314] do_idle+0x1e0/0x280 [ 46.325539] cpu_startup_entry+0x24/0x40 [ 46.329460] rest_init+0xd4/0xe0 [ 46.332687] arch_call_rest_init+0xc/0x14 [ 46.336695] start_kernel+0x420/0x44c [ 46.340353] ---[ end trace bc1ee695123cbacd ]--- Fixes: 47dd7a540b8a0 ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Fugang Duan Signed-off-by: Joakim Zhang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman