kernel/linux.git/drivers/net/wwan, branch v6.6.131

net: wwan: t7xx: fix potential skb->frags overflow in RX path

2026-02-06T15:48:22+00:00

[ Upstream commit f0813bcd2d9d97fdbdf2efb9532ab03ae92e99e6 ] When receiving data in the DPMAIF RX path, the t7xx_dpmaif_set_frag_to_skb() function adds page fragments to an skb without checking if the number of fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and potentially causing kernel crashes or other undefined behavior. This issue was identified through static code analysis by comparing with a similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76: fix array overflow on receiving too many fragments for a packet"). The vulnerability could be triggered if the modem firmware sends packets with excessive fragments. While under normal protocol conditions (MTU 3080 bytes, BAT buffer 3584 bytes), a single packet should not require additional fragments, the kernel should not blindly trust firmware behavior. Malicious, buggy, or compromised firmware could potentially craft packets with more fragments than the kernel expects. Fix this by adding a bounds check before calling skb_add_rx_frag() to ensure nr_frags does not exceed MAX_SKB_FRAGS. The check must be performed before unmapping to avoid a page leak and double DMA unmap during device teardown. Fixes: d642b012df70a ("net: wwan: t7xx: Add data path interface") Signed-off-by: Kery Qi Link: https://patch.msgid.link/20260122170401.1986-2-qikeyu2017@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: iosm: Fix memory leak in ipc_mux_deinit()

2026-01-17T15:29:58+00:00

[ Upstream commit 92e6e0a87f6860a4710f9494f8c704d498ae60f8 ] Commit 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") allocated memory for pp_qlt in ipc_mux_init() but did not free it in ipc_mux_deinit(). This results in a memory leak when the driver is unloaded. Free the allocated memory in ipc_mux_deinit() to fix the leak. Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Co-developed-by: Jianhao Xu Signed-off-by: Jianhao Xu Signed-off-by: Zilin Guan Reviewed-by: Loic Poulain Link: https://patch.msgid.link/20251230071853.1062223-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: t7xx: Fix napi rx poll issue

2025-06-19T13:28:33+00:00

[ Upstream commit 905fe0845bb27e4eed2ca27ea06e6c4847f1b2b1 ] When driver handles the napi rx polling requests, the netdev might have been released by the dellink logic triggered by the disconnect operation on user plane. However, in the logic of processing skb in polling, an invalid netdev is still being used, which causes a panic. BUG: kernel NULL pointer dereference, address: 00000000000000f1 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:dev_gro_receive+0x3a/0x620 [...] Call Trace: ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x4f/0xa0 ? asm_exc_page_fault+0x22/0x30 ? __pfx_t7xx_ccmni_recv_skb+0x10/0x10 [mtk_t7xx (HASH:1400 7)] ? dev_gro_receive+0x3a/0x620 napi_gro_receive+0xad/0x170 t7xx_ccmni_recv_skb+0x48/0x70 [mtk_t7xx (HASH:1400 7)] t7xx_dpmaif_napi_rx_poll+0x590/0x800 [mtk_t7xx (HASH:1400 7)] net_rx_action+0x103/0x470 irq_exit_rcu+0x13a/0x310 sysvec_apic_timer_interrupt+0x56/0x90 Fixes: 5545b7b9f294 ("net: wwan: t7xx: Add NAPI support") Signed-off-by: Jinjian Song Link: https://patch.msgid.link/20250530031648.5592-1-jinjian.song@fibocom.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: wwan: mhi_wwan_mbim: Silence sequence number glitch errors

2025-03-22T19:50:43+00:00

[ Upstream commit 0d1fac6d26aff5df21bb4ec980d9b7a11c410b96 ] When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is constantly being filled with errors related to a "sequence number glitch", e.g.: [ 1903.284538] sequence number glitch prev=16 curr=0 [ 1913.812205] sequence number glitch prev=50 curr=0 [ 1923.698219] sequence number glitch prev=142 curr=0 [ 2029.248276] sequence number glitch prev=1555 curr=0 [ 2046.333059] sequence number glitch prev=70 curr=0 [ 2076.520067] sequence number glitch prev=272 curr=0 [ 2158.704202] sequence number glitch prev=2655 curr=0 [ 2218.530776] sequence number glitch prev=2349 curr=0 [ 2225.579092] sequence number glitch prev=6 curr=0 Internet connectivity is working fine, so this error seems harmless. It looks like modem does not preserve the sequence number when entering low power state; the amount of errors depends on how actively the modem is being used. A similar issue has also been seen on USB-based MBIM modems [1]. However, in cdc_ncm.c the "sequence number glitch" message is a debug message instead of an error. Apply the same to the mhi_wwan_mbim.c driver to silence these errors when using the modem. [1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.html Signed-off-by: Stephan Gerhold Reviewed-by: Loic Poulain Acked-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-503735977cbd@linaro.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: iosm: Fix hibernation by re-binding the driver around it

2025-02-17T08:40:08+00:00

[ Upstream commit 0b6f6593aa8c3a05f155c12fd0e7ad33a5149c31 ] Currently, the driver is seriously broken with respect to the hibernation (S4): after image restore the device is back into IPC_MEM_EXEC_STAGE_BOOT (which AFAIK means bootloader stage) and needs full re-launch of the rest of its firmware, but the driver restore handler treats the device as merely sleeping and just sends it a wake-up command. This wake-up command times out but device nodes (/dev/wwan*) remain accessible. However attempting to use them causes the bootloader to crash and enter IPC_MEM_EXEC_STAGE_CD_READY stage (which apparently means "a crash dump is ready"). It seems that the device cannot be re-initialized from this crashed stage without toggling some reset pin (on my test platform that's apparently what the device _RST ACPI method does). While it would theoretically be possible to rewrite the driver to tear down the whole MUX / IPC layers on hibernation (so the bootloader does not crash from improper access) and then re-launch the device on restore this would require significant refactoring of the driver (believe me, I've tried), since there are quite a few assumptions hard-coded in the driver about the device never being partially de-initialized (like channels other than devlink cannot be closed, for example). Probably this would also need some programming guide for this hardware. Considering that the driver seems orphaned [1] and other people are hitting this issue too [2] fix it by simply unbinding the PCI driver before hibernation and re-binding it after restore, much like USB_QUIRK_RESET_RESUME does for USB devices that exhibit a similar problem. Tested on XMM7360 in HP EliteBook 855 G7 both with s2idle (which uses the existing suspend / resume handlers) and S4 (which uses the new code). [1]: https://lore.kernel.org/all/c248f0b4-2114-4c61-905f-466a786bdebb@leemhuis.info/ [2]: https://github.com/xmm7360/xmm7360-pci/issues/211#issuecomment-1804139413 Reviewed-by: Sergey Ryazanov Signed-off-by: Maciej S. Szmigiero Link: https://patch.msgid.link/e60287ebdb0ab54c4075071b72568a40a75d0205.1736372610.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: iosm: Properly check for valid exec stage in ipc_mmio_init()

2025-01-09T12:32:02+00:00

[ Upstream commit a7af435df0e04cfb4a4004136d597c42639a2ae7 ] ipc_mmio_init() used the post-decrement operator in its loop continuing condition of "retries" counter being "> 0", which meant that when this condition caused loop exit "retries" counter reached -1. But the later valid exec stage failure check only tests for "retries" counter being exactly zero, so it didn't trigger in this case (but would wrongly trigger if the code reaches a valid exec stage in the very last loop iteration). Fix this by using the pre-decrement operator instead, so the loop counter is exactly zero on valid exec stage failure. Fixes: dc0514f5d828 ("net: iosm: mmio scratchpad") Signed-off-by: Maciej S. Szmigiero Link: https://patch.msgid.link/8b19125a825f9dcdd81c667c1e5c48ba28d505a6.1735490770.git.mail@maciej.szmigiero.name Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: t7xx: Fix FSM command timeout issue

2025-01-09T12:32:01+00:00

[ Upstream commit 4f619d518db9cd1a933c3a095a5f95d0c1584ae8 ] When driver processes the internal state change command, it use an asynchronous thread to process the command operation. If the main thread detects that the task has timed out, the asynchronous thread will panic when executing the completion notification because the main thread completion object has been released. BUG: unable to handle page fault for address: fffffffffffffff8 PGD 1f283a067 P4D 1f283a067 PUD 1f283c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP NOPTI RIP: 0010:complete_all+0x3e/0xa0 [...] Call Trace: ? __die_body+0x68/0xb0 ? page_fault_oops+0x379/0x3e0 ? exc_page_fault+0x69/0xa0 ? asm_exc_page_fault+0x22/0x30 ? complete_all+0x3e/0xa0 fsm_main_thread+0xa3/0x9c0 [mtk_t7xx (HASH:1400 5)] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xd8/0x110 ? __pfx_fsm_main_thread+0x10/0x10 [mtk_t7xx (HASH:1400 5)] ? __pfx_kthread+0x10/0x10 ret_from_fork+0x38/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 [...] CR2: fffffffffffffff8 ---[ end trace 0000000000000000 ]--- Use the reference counter to ensure safe release as Sergey suggests: https://lore.kernel.org/all/da90f64c-260a-4329-87bf-1f9ff20a5951@gmail.com/ Fixes: 13e920d93e37 ("net: wwan: t7xx: Add core components") Signed-off-by: Jinjian Song Acked-by: Sergey Ryazanov Link: https://patch.msgid.link/20241224041552.8711-1-jinjian.song@fibocom.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

net: wwan: t7xx: Fix off-by-one error in t7xx_dpmaif_rx_buf_alloc()

2024-11-14T12:19:37+00:00

commit 3b557be89fc688dbd9ccf704a70f7600a094f13a upstream. The error path in t7xx_dpmaif_rx_buf_alloc(), free and unmap the already allocated and mapped skb in a loop, but the loop condition terminates when the index reaches zero, which fails to free the first allocated skb at index zero. Check with i-- so that skb at index 0 is freed as well. Cc: stable@vger.kernel.org Fixes: d642b012df70 ("net: wwan: t7xx: Add data path interface") Acked-by: Sergey Ryazanov Signed-off-by: Jinjie Ruan Reviewed-by: Ilpo Järvinen Link: https://patch.msgid.link/20241101025316.3234023-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: wwan: fix global oob in wwan_rtnl_policy

2024-11-01T00:58:29+00:00

[ Upstream commit 47dd5447cab8ce30a847a0337d5341ae4c7476a7 ] The variable wwan_rtnl_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. Exactly same bug cause as the oob fixed in commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"). ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:388 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 Read of size 1 at addr ffffffff8b09cb60 by task syz.1.66276/323862 CPU: 0 PID: 323862 Comm: syz.1.66276 Not tainted 6.1.70 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x177/0x231 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x14f/0x750 mm/kasan/report.c:395 kasan_report+0x139/0x170 mm/kasan/report.c:495 validate_nla lib/nlattr.c:388 [inline] __nla_validate_parse+0x19d7/0x29a0 lib/nlattr.c:603 __nla_parse+0x3c/0x50 lib/nlattr.c:700 nla_parse_nested_deprecated include/net/netlink.h:1269 [inline] __rtnl_newlink net/core/rtnetlink.c:3514 [inline] rtnl_newlink+0x7bc/0x1fd0 net/core/rtnetlink.c:3623 rtnetlink_rcv_msg+0x794/0xef0 net/core/rtnetlink.c:6122 netlink_rcv_skb+0x1de/0x420 net/netlink/af_netlink.c:2508 netlink_unicast_kernel net/netlink/af_netlink.c:1326 [inline] netlink_unicast+0x74b/0x8c0 net/netlink/af_netlink.c:1352 netlink_sendmsg+0x882/0xb90 net/netlink/af_netlink.c:1874 sock_sendmsg_nosec net/socket.c:716 [inline] __sock_sendmsg net/socket.c:728 [inline] ____sys_sendmsg+0x5cc/0x8f0 net/socket.c:2499 ___sys_sendmsg+0x21c/0x290 net/socket.c:2553 __sys_sendmsg net/socket.c:2582 [inline] __do_sys_sendmsg net/socket.c:2591 [inline] __se_sys_sendmsg+0x19e/0x270 net/socket.c:2589 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f67b19a24ad RSP: 002b:00007f67b17febb8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f67b1b45f80 RCX: 00007f67b19a24ad RDX: 0000000000000000 RSI: 0000000020005e40 RDI: 0000000000000004 RBP: 00007f67b1a1e01d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd2513764f R14: 00007ffd251376e0 R15: 00007f67b17fed40 The buggy address belongs to the variable: wwan_rtnl_policy+0x20/0x40 The buggy address belongs to the physical page: page:ffffea00002c2700 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xb09c flags: 0xfff00000001000(reserved|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000001000 ffffea00002c2708 ffffea00002c2708 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner info is not present (never set?) Memory state around the buggy address: ffffffff8b09ca00: 05 f9 f9 f9 05 f9 f9 f9 00 01 f9 f9 00 01 f9 f9 ffffffff8b09ca80: 00 00 00 05 f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 >ffffffff8b09cb00: 00 00 00 00 05 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 ^ ffffffff8b09cb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== According to the comment of `nla_parse_nested_deprecated`, use correct size `IFLA_WWAN_MAX` here to fix this issue. Fixes: 88b710532e53 ("wwan: add interface creation support") Signed-off-by: Lin Ma Reviewed-by: Loic Poulain Reviewed-by: Simon Horman Link: https://patch.msgid.link/20241015131621.47503-1-linma@zju.edu.cn Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin

net: wwan: qcom_bam_dmux: Fix missing pm_runtime_disable()

2024-10-10T09:57:15+00:00

[ Upstream commit d505d3593b52b6c43507f119572409087416ba28 ] It's important to undo pm_runtime_use_autosuspend() with pm_runtime_dont_use_autosuspend() at driver exit time. But the pm_runtime_disable() and pm_runtime_dont_use_autosuspend() is missing in the error path for bam_dmux_probe(). So add it. Found by code review. Compile-tested only. Fixes: 21a0ffd9b38c ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver") Suggested-by: Stephan Gerhold Signed-off-by: Jinjie Ruan Reviewed-by: Stephan Gerhold Reviewed-by: Sergey Ryazanov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin