kernel/linux.git/drivers/net/wireless, branch v6.12.92

wifi: ath11k: fix peer resolution on rx path when peer_id=0

2026-06-01T15:46:30+00:00

[ Upstream commit 2a2451a34afdf563b3102d36a4b6cf335cf813e2 ] It has been observed that on certain chipsets a peer can be assigned peer_id=0. For reception of non-aggregated MPDUs this is fine as ath11k_dp_rx_h_find_peer() has a fallback case where it locates the peer based upon the source MAC address. On an aggregated link, the mpdu_start header is only populated by hardware on the first sub-MSDU. This causes the peer resolution to be skipped for the subsequent MSDUs and the encryption type of these frames to be set to an incorrect value, resulting in these MSDUs being dropped by ieee80211. ath11k_pci 0000:03:00.0: data rx skb 000000002f4b704d len 1534 peer xx:xx:xx:xx:xx:xx 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 1 last_msdu 0 ath11k_pci 0000:03:00.0: data rx skb 0000000038acd580 len 1534 peer (null) 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d00 fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 0 last_msdu 1 Remove the null peer_id checks in ath11k_dp_rx_h_find_peer() and ath11k_hal_rx_parse_mon_status_tlv(), allowing peers with an assigned ID of 0 to be resolved. Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9 Fixes: 2167fa606c0f ("ath11k: Add support for RX decapsulation offload") Reviewed-by: Baochen Qiang Signed-off-by: Matthew Leach Reviewed-by: P Praneesh Link: https://patch.msgid.link/20260424-ath11k-null-peerid-workaround-v4-1-252b224d3cf6@collabora.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath10k: skip WMI and beacon transmission when device is wedged

2026-06-01T15:46:28+00:00

[ Upstream commit 54a5b38e4396530e5b2f12b54d3844e860ab6784 ] In ath10k_wmi_cmd_send(), the current code detects ATH10K_STATE_WEDGED and sets ret to -ESHUTDOWN, but still proceeds to transmit pending beacons and calls ath10k_wmi_cmd_send_nowait(). This can lead to incorrect behavior, as WMI commands and beacons are still sent after the device has been marked as wedged, and the original -ESHUTDOWN return value may be overwritten by the result of the send path. The wedged state indicates the hardware is already unreliable, and no further interaction with firmware is expected or meaningful in this state. Fix this by skipping beacon transmission and the WMI send path entirely once ATH10K_STATE_WEDGED is detected, ensuring consistent return values and avoiding unnecessary firmware interaction. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Fixes: c256a94d1b1b ("wifi: ath10k: shutdown driver when hardware is unreliable") Signed-off-by: Kang Yang Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260428061737.37-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: fix error path leak in ath11k_tm_cmd_wmi_ftm()

2026-06-01T15:46:28+00:00

[ Upstream commit 7320d6eb861e9913193a7801834c661381756a79 ] This is similar to what was fixed by previous patches. We have a call to ath11k_wmi_cmd_send() which does check the return value, but forgot to free the related skb on error. Fixes: b43310e44edc ("wifi: ath11k: factory test mode support") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-4-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: fix error path leaks in some WMI WOW calls

2026-06-01T15:46:28+00:00

[ Upstream commit 55dda532bbc261aef495e403c8900c5e2ab5fa34 ] Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. Fixes: 79802b13a492 ("ath11k: implement WoW enable and wakeup commands") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: clear shared SRNG pointer state on restart

2026-06-01T15:46:19+00:00

commit f51e4b3b5574ad8cb5b16b11f8a1452147ece87a upstream. LMAC rings reuse the shared rdp/wrp pointer buffers without going through the normal SRNG hw-init path that zeros non-LMAC ring pointers. After restart, ath11k_hal_srng_clear() can therefore hand stale hp/tp state from the previous firmware instance back to the new one. Clear the shared pointer buffers while keeping the allocations in place so restart still avoids reallocating SRNG DMA memory, but starts with fresh ring-pointer state. Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman

wifi: ath10k: fix station lookup failure during disconnect

2026-05-23T11:04:23+00:00

[ Upstream commit 9a34a59c6086ae731a06b3e61b0951feef758648 ] Recent commit [1] moved station statistics collection to an earlier stage of the disconnect flow. With this change in place, ath10k fails to resolve the station entry when handling a peer stats event triggered during disconnect, resulting in log messages such as: wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING) ath10k_pci 0000:3a:00.0: not found station for peer stats ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22 The failure occurs because ath10k relies on ieee80211_find_sta_by_ifaddr() for station lookup. That function uses local->sta_hash, but by the time the peer stats request is triggered during disconnect, mac80211 has already removed the station from that hash table, leading to lookup failure. Before commit [1], this issue was not visible because the transition from IEEE80211_STA_NONE to IEEE80211_STA_NOTEXIST prevented ath10k from sending a peer stats request at all: ath10k_mac_sta_get_peer_stats_info() would fail early to find the peer and skip requesting statistics. Fix this by switching the lookup path to ath10k_peer_find(), which queries ath10k's internal peer table. At the point where the firmware emits the peer stats event, the peer entry is still present in the driver's list, ensuring lookup succeeds. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1 Fixes: a203dbeeca15 ("wifi: mac80211: collect station statistics earlier when disconnect") # [1] Reported-by: Paul Menzel Closes: https://lore.kernel.org/ath10k/57671b89-ec9f-4e6c-992c-45eb8e75929c@molgen.mpg.de Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Reviewed-by: Paul Menzel Tested-by: Paul Menzel Link: https://patch.msgid.link/20260325-ath10k-station-lookup-failure-v1-1-2e0c970f25d5@oss.qualcomm.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: brcmfmac: Fix error pointer dereference

2026-05-23T11:04:23+00:00

[ Upstream commit dd8592fc6007a451c3e4b9025de365e39de8178a ] The function brcmf_chip_add_core() can return an error pointer and is not checked. Add checks for error pointer. Detected by Smatch: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() Fixes: cb7cf7be9eba7 ("brcmfmac: make chip related functions host interface independent") Signed-off-by: Ethan Tidmore Acked-by: Arend van Spriel Link: https://patch.msgid.link/20260217023043.73631-1-ethantidmore06@gmail.com [add missing wifi: prefix] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: rtw89: phy: fix uninitialized variable access in rtw89_phy_cfo_set_crystal_cap()

2026-05-23T11:04:22+00:00

[ Upstream commit 047cddf88c611e616d49a00311d4722e46286234 ] In the rtw89_phy_cfo_set_crystal_cap() function, for chips other than RTL8852A/RTL8851B, the values read by rtw89_mac_read_xtal_si() are stored into the local variables sc_xi_val and sc_xo_val. If either read fails, these variables remain uninitialized, they are later used to update cfo->crystal_cap and in debug print statements. This can lead to undefined behavior. Fix the issue by initializing sc_xi_val and sc_xo_val to zero, like is implemented in vendor driver. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8379fa611536 ("rtw89: 8852c: add write/read crystal function in CFO tracking") Signed-off-by: Alexey Velichayshiy Acked-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20260323140613.1615574-1-a.velichayshiy@ispras.ru Signed-off-by: Sasha Levin

wifi: mt76: mt7921: fix 6GHz regulatory update on connection

2026-05-23T11:04:22+00:00

[ Upstream commit 3dc0c40d7806c72cfe88cf4e1e2650c1673f9db4 ] Call mt7921_regd_update() instead of mt7921_mcu_set_clc() when setting the 6GHz power type after connection, so that regulatory limits and SAR power are also applied. Fixes: 51ba0e3a15eb ("wifi: mt76: mt7921: add 6GHz power type support for clc") Signed-off-by: Michael Lo Link: https://patch.msgid.link/20260211095025.2415624-1-leon.yen@mediatek.com Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work()

2026-05-23T11:04:22+00:00

[ Upstream commit c8f62f73bbced3a79894655bdb0b625462d956fc ] When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work. Fixes: 878161d5d4a4 ("wifi: mt76: mt7996: enable coredump support") Signed-off-by: Duoming Zhou Link: https://patch.msgid.link/20260131024731.18741-1-duoming@zju.edu.cn Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin