kernel/linux.git/drivers/net/wireless, branch v5.15.209

wifi: ath11k: fix error path leaks in some WMI WOW calls

2026-06-01T15:35:50+00:00

[ Upstream commit 55dda532bbc261aef495e403c8900c5e2ab5fa34 ] Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. Fixes: 79802b13a492 ("ath11k: implement WoW enable and wakeup commands") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: clear shared SRNG pointer state on restart

2026-06-01T15:35:47+00:00

commit f51e4b3b5574ad8cb5b16b11f8a1452147ece87a upstream. LMAC rings reuse the shared rdp/wrp pointer buffers without going through the normal SRNG hw-init path that zeros non-LMAC ring pointers. After restart, ath11k_hal_srng_clear() can therefore hand stale hp/tp state from the previous firmware instance back to the new one. Clear the shared pointer buffers while keeping the allocations in place so restart still avoids reallocating SRNG DMA memory, but starts with fresh ring-pointer state. Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman

wifi: brcmfmac: Fix error pointer dereference

2026-06-01T15:35:28+00:00

[ Upstream commit dd8592fc6007a451c3e4b9025de365e39de8178a ] The function brcmf_chip_add_core() can return an error pointer and is not checked. Add checks for error pointer. Detected by Smatch: drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error: 'core' dereferencing possible ERR_PTR() Fixes: cb7cf7be9eba7 ("brcmfmac: make chip related functions host interface independent") Signed-off-by: Ethan Tidmore Acked-by: Arend van Spriel Link: https://patch.msgid.link/20260217023043.73631-1-ethantidmore06@gmail.com [add missing wifi: prefix] Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: rtlwifi: pci: fix possible use-after-free caused by unfinished irq_prepare_bcn_tasklet

2026-06-01T15:35:27+00:00

[ Upstream commit 039cd522dc70151da13329a5e3ae19b1736f468a ] The irq_prepare_bcn_tasklet is initialized in rtl_pci_init() and scheduled when RTL_IMR_BCNINT interrupt is triggered by hardware. But it is never killed in rtl_pci_deinit(). When the rtlwifi card probe fails or is being detached, the ieee80211_hw is deallocated. However, irq_prepare_bcn_tasklet may still be running or pending, leading to use-after-free when the freed ieee80211_hw is accessed in _rtl_pci_prepare_bcn_tasklet(). Similar to irq_tasklet, add tasklet_kill() in rtl_pci_deinit() to ensure that irq_prepare_bcn_tasklet is properly terminated before the ieee80211_hw is released. The issue was identified through static analysis. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Duoming Zhou Acked-by: Ping-Ke Shih Signed-off-by: Ping-Ke Shih Link: https://patch.msgid.link/20260223045522.48377-1-duoming@zju.edu.cn Signed-off-by: Sasha Levin

wifi: mwifiex: Fix memory leak in mwifiex_11n_aggregate_pkt()

2026-06-01T15:35:27+00:00

[ Upstream commit 990a73dec3fdc145fef6c827c29205437d533ece ] In mwifiex_11n_aggregate_pkt(), skb_aggr is allocated via mwifiex_alloc_dma_align_buf(). If mwifiex_is_ralist_valid() returns false, the function currently returns -1 immediately without freeing the previously allocated skb_aggr, causing a memory leak. Since skb_aggr has not yet been queued via skb_queue_tail(), no other references to this memory exist. Therefore, it has to be freed locally before returning the error. Fix this by calling mwifiex_write_data_complete() to free skb_aggr before returning the error status. Compile tested only. Issue found using a prototype static analysis tool and code review. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Zilin Guan Reviewed-by: Jeff Chen Link: https://patch.msgid.link/20260119092625.1349934-1-zilin@seu.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: b43: enforce bounds check on firmware key index in b43_rx()

2026-06-01T15:35:20+00:00

commit 1f4f78bf8549e6ac4f04fba4176854f3a6e0c332 upstream. The firmware-controlled key index in b43_rx() can exceed the dev->key[] array size (58 entries). The existing B43_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read. Make the B43_WARN_ON check enforcing by dropping the frame when the firmware returns an invalid key index. Suggested-by: Jonas Gorski Acked-by: Michael Büsch Fixes: e4d6b7951812 ("[B43]: add mac80211-based driver for modern BCM43xx devices") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Link: https://patch.msgid.link/20260417111145.2694196-1-tristmd@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: ath5k: do not access array OOB

2026-06-01T15:35:20+00:00

commit d748603f12baff112caa3ab7d39f50100f010dbd upstream. Vincent reports: > The ath5k driver seems to do an array-index-out-of-bounds access as > shown by the UBSAN kernel message: > UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20 > index 4 is out of range for type 'ieee80211_tx_rate [4]' > ... > Call Trace: > > dump_stack_lvl+0x5d/0x80 > ubsan_epilogue+0x5/0x2b > __ubsan_handle_out_of_bounds.cold+0x46/0x4b > ath5k_tasklet_tx+0x4e0/0x560 [ath5k] > tasklet_action_common+0xb5/0x1c0 It is real. 'ts->ts_final_idx' can be 3 on 5212, so: info->status.rates[ts->ts_final_idx + 1].idx = -1; with the array defined as: struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; while the size is: #define IEEE80211_TX_MAX_RATES 4 is indeed bogus. Set this 'idx = -1' sentinel only if the array index is less than the array size. As mac80211 will not look at rates beyond the size (IEEE80211_TX_MAX_RATES). Note: The effect of the OOB write is negligible. It just overwrites the next member of info->status, i.e. ack_signal. Signed-off-by: Jiri Slaby (SUSE) Reported-by: Vincent Danjean Link: https://lore.kernel.org/all/aQYUkIaT87ccDCin@eldamar.lan Closes: https://bugs.debian.org/1119093 Fixes: 6d7b97b23e11 ("ath5k: fix tx status reporting issues") Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20251209100459.2253198-1-jirislaby@kernel.org Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman

wifi: rsi: fix kthread lifetime race between self-exit and external-stop

2026-06-01T15:35:20+00:00

commit db57a1aa54ff68669781976e4edb045e09e2b65b upstream. RSI driver use both self-exit(kthread_complete_and_exit) and external-stop (kthread_stop) when killing a kthread. Generally, kthread_stop() is called first, and in this case, no particular issues occur. However, in rare instances where kthread_complete_and_exit() is called first and then kthread_stop() is called, a UAF occurs because the kthread object, which has already exited and been freed, is accessed again. Therefore, to prevent this with minimal modification, you must remove kthread_stop() and change the code to wait until the self-exit operation is completed. Cc: Reported-by: syzbot+5de83f57cd8531f55596@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/69e5d03b.a00a0220.1bd0ca.0064.GAE@google.com/ Fixes: 4c62764d0fc2 ("rsi: improve kernel thread handling to fix kernel panic") Signed-off-by: Jeongjun Park Link: https://patch.msgid.link/20260422173846.37640-1-aha310510@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: b43legacy: enforce bounds check on firmware key index in RX path

2026-06-01T15:35:20+00:00

commit a035766f970bde2d4298346a31a80685be5c0205 upstream. Same fix as b43: the firmware-controlled key index in b43legacy_rx() can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is non-enforcing in production builds, allowing an out-of-bounds read of dev->key[]. Make the check enforcing by dropping the frame for invalid indices. Fixes: 75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices") Cc: stable@vger.kernel.org Signed-off-by: Tristan Madani Link: https://patch.msgid.link/20260417111145.2694196-2-tristmd@gmail.com Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: iwlwifi: read txq->read_ptr under lock

2026-06-01T15:35:09+00:00

commit c2ace6300600c634553657785dfe5ea0ed688ac2 upstream. If we read txq->read_ptr without lock, we can read the same value twice, then obtain the lock, and reclaim from there to two different places, but crucially reclaim the same entry twice, resulting in the WARN_ONCE() a little later. Fix that by reading txq->read_ptr under lock. Signed-off-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://msgid.link/20240319100755.bf4c62196504.I978a7ca56c6bd6f1bf42c15aa923ba03366a840b@changeid Signed-off-by: Johannes Berg [ Change read_ptr definition according to commit 413be839bfca9("wifi: iwlwifi: add a validity check of queue_id in iwl_txq_reclaim"). ] Signed-off-by: Robert Garcia Signed-off-by: Greg Kroah-Hartman