kernel/linux.git/drivers/net/wireless, branch v4.4.235

Revert "ath10k: fix DMA related firmware crashes on multiple devices"

2020-09-03T09:19:25+00:00

[ Upstream commit a1769bb68a850508a492e3674ab1e5e479b11254 ] This reverts commit 76d164f582150fd0259ec0fcbc485470bcd8033e. PCIe hung issue was observed on multiple platforms. The issue was reproduced when DUT was configured as AP and associated with 50+ STAs. For QCA9984/QCA9888, the DMA_BURST_SIZE register controls the AXI burst size of the RD/WR access to the HOST MEM. 0 - No split , RAW read/write transfer size from MAC is put out on bus as burst length 1 - Split at 256 byte boundary 2,3 - Reserved With PCIe protocol analyzer, we can see DMA Read crossing 4KB boundary when issue happened. It broke PCIe spec and caused PCIe stuck. So revert the default value from 0 to 1. Tested: IPQ8064 + QCA9984 with firmware 10.4-3.10-00047 QCS404 + QCA9984 with firmware 10.4-3.9.0.2--00044 Synaptics AS370 + QCA9888 with firmware 10.4-3.9.0.2--00040 Signed-off-by: Zhi Chen Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

rtlwifi: rtl8192cu: Prevent leaking urb

2020-09-03T09:19:24+00:00

[ Upstream commit 03128643eb5453a798db5770952c73dc64fcaf00 ] If usb_submit_urb fails the allocated urb should be unanchored and released. Signed-off-by: Reto Schneider Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200622132113.14508-3-code@reto-schneider.ch Signed-off-by: Sasha Levin

wl1251: fix always return 0 error

2020-08-21T08:53:02+00:00

[ Upstream commit 20e6421344b5bc2f97b8e2db47b6994368417904 ] wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot Signed-off-by: Wang Hai Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com Signed-off-by: Sasha Levin

mwifiex: Prevent memory corruption handling keys

2020-08-21T08:53:01+00:00

[ Upstream commit e18696786548244914f36ec3c46ac99c53df99c3 ] The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Dan Carpenter Acked-by: Ganapathi Bhat Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda Signed-off-by: Sasha Levin

iwlegacy: Check the return value of pcie_capability_read_*()

2020-08-21T08:52:59+00:00

[ Upstream commit 9018fd7f2a73e9b290f48a56b421558fa31e8b75 ] On failure pcie_capability_read_dword() sets it's last parameter, val to 0. However, with Patch 14/14, it is possible that val is set to ~0 on failure. This would introduce a bug because (x & x) == (~0 & x). This bug can be avoided without changing the function's behaviour if the return value of pcie_capability_read_dword is checked to confirm success. Check the return value of pcie_capability_read_dword() to ensure success. Suggested-by: Bjorn Helgaas Signed-off-by: Bolarinwa Olayemi Saheed Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200713175529.29715-3-refactormyself@gmail.com Signed-off-by: Sasha Levin

brcmfmac: To fix Bss Info flag definition Bug

2020-08-21T08:52:59+00:00

[ Upstream commit fa3266541b13f390eb35bdbc38ff4a03368be004 ] Bss info flag definition need to be fixed from 0x2 to 0x4 This flag is for rssi info received on channel. All Firmware branches defined as 0x4 and this is bug in brcmfmac. Signed-off-by: Prasanna Kerekoppa Signed-off-by: Chi-hsien Lin Signed-off-by: Wright Feng Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200604071835.3842-6-wright.feng@cypress.com Signed-off-by: Sasha Levin

ath9k: release allocated buffer if timed out

2020-08-21T08:52:52+00:00

[ Upstream commit 728c1e2a05e4b5fc52fab3421dce772a806612a2 ] In ath9k_wmi_cmd, the allocated network buffer needs to be released if timeout happens. Otherwise memory will be leaked. Signed-off-by: Navid Emamdoost Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k_htc: release allocated buffer if timed out

2020-08-21T08:52:52+00:00

[ Upstream commit 853acf7caf10b828102d92d05b5c101666a6142b ] In htc_config_pipe_credits, htc_setup_complete, and htc_connect_service if time out happens, the allocated buffer needs to be released. Otherwise there will be memory leak. Signed-off-by: Navid Emamdoost Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k: Fix regression with Atheros 9271

2020-07-31T14:43:15+00:00

commit 92f53e2fda8bb9a559ad61d57bfb397ce67ed0ab upstream. This fix allows ath9k_htc modules to connect to WLAN once again. Fixes: 2bbcaaee1fcb ("ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208251 Signed-off-by: Mark O'Donovan Reported-by: Roman Mamedov Tested-by: Viktor Jägersküpper Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200711043324.8079-1-shiftee@posteo.net Signed-off-by: Greg Kroah-Hartman

ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb

2020-07-31T14:43:15+00:00

commit 2bbcaaee1fcbd83272e29f31e2bb7e70d8c49e05 upstream. In ath9k_hif_usb_rx_cb interface number is assumed to be 0. usb_ifnum_to_if(urb->dev, 0) But it isn't always true. The case reported by syzbot: https://lore.kernel.org/linux-usb/000000000000666c9c05a1c05d12@google.com usb 2-1: new high-speed USB device number 2 using dummy_hcd usb 2-1: config 1 has an invalid interface number: 2 but max is 0 usb 2-1: config 1 has no interface number 0 usb 2-1: New USB device found, idVendor=0cf3, idProduct=9271, bcdDevice= 1.08 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.0-rc5-syzkaller #0 Call Trace __usb_hcd_giveback_urb+0x29a/0x550 drivers/usb/core/hcd.c:1650 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1716 dummy_timer+0x1258/0x32ae drivers/usb/gadget/udc/dummy_hcd.c:1966 call_timer_fn+0x195/0x6f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0x5f9/0x1500 kernel/time/timer.c:1786 __do_softirq+0x21e/0x950 kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0x178/0x1a0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:546 [inline] smp_apic_timer_interrupt+0x141/0x540 arch/x86/kernel/apic/apic.c:1146 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:829 Reported-and-tested-by: syzbot+40d5d2e8a4680952f042@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200404041838.10426-6-hqjagain@gmail.com Cc: Viktor Jägersküpper Signed-off-by: Greg Kroah-Hartman