kernel/linux.git/drivers/net/wireless/ti, branch v5.6.17

wlcore: remove stray plus sign

2020-03-12T16:48:14+00:00

The commit mentioned below added a stray plus sign, likely due to some conflict resolution (i.e. as a leftover from a unified diff), which was harmless since it was just used as an integer constant modifier. Remove it anyway, now that I stumbled across it. Fixes: cf33a7728bf2 ("wlcore: mesh: Add support for RX Broadcast Key") Signed-off-by: Johannes Berg Signed-off-by: Kalle Valo

wlcore: mesh: Add support for RX Broadcast Key

2020-01-26T15:33:40+00:00

In order to support authentication of equals peers, need to save RX Broadcast key per peer (on top of 1 TX broadcast key and unicast key per peer). Signed-off-by: Maital Hahn Acked-by: Guy Mishol Signed-off-by: Hari Nagalla Signed-off-by: Kalle Valo

Merge tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2019-11-27T18:03:52+00:00

Pull MMC updates from Ulf Hansson: "These are the updates for MMC and MEMSTICK for v5.5. Note that this also contains quite some additional changes reaching beyond both the MMC and MEMSTICK subsystems. This is primarily because of fixing an old regression for a WiFi driver based on the SDIO interface on an OMAP openpandora board MMC core: - Add CMD13 polling for MMC IOCTLS with R1B response. - Add common DT properties for clk-phase-delays for various speed modes. - Fix size overflow for mmc gp-partitions. - Re-work HW reset for SDIO cards, which also includes a re-work for Marvell's WiFi mwifiex SDIO func driver. MMC host: - jz4740: Add support for X1000 and JZ4760. - jz4740: Add support for 8-bit bus and for low power mode. - mmci: Add support for HW busy timeout for the stm32_sdmmc variant. - owl-mmc: Add driver for Actions Semi Owl SoCs SD/MMC controller. - renesas_sdhi: Add support for r8a774b1. - sdhci_am654: Add support for Command Queuing Engine for J721E. - sdhci-milbeaut: Add driver for the Milbeaut SD controller. - sdhci-of-arasan: Add support for ZynqMP tap-delays. - sdhci-of-arasan: Add support for clk-phase-delays for SD cards. - sdhci-of-arasan: Add support for Intel LGM SDXC. - sdhci-of-aspeed: Allow inversion of the internal card detect signal. - sdhci-of-esdhc: Fixup workaround for erratum A-008171 for tunings. - sdhci-of-at91: Improve support for calibration. - sdhci-pci: Add support for Intel JSL. - sdhci-pci: Add quirk for AMD SDHC Device 0x7906. - tmio: Enable support for erase/discard/trim requests. MMC/OMAP/pandora/wl1251: The TI wl1251 WiFi driver for SDIO on the OMAP openpandora board has been broken since v4.7. To fix the problems, changes have been made cross subsystems, but also to OMAP2 machine code and to openpandora DTS files, as summarized below. Relevant changes have been tagged for stable. - mmc/wl1251: Re-introduce lost SDIO quirks and vendor-id for wl1251 - omap/omap_hsmmc: Remove redundant platform config for openpandora - omap_hsmmc: Initialize non-std SDIO card for wl1251 for pandora - omap/dts/pandora: Specify wl1251 through a child node of mmc3 - wl1251: Add devicetree support for TI wl1251 SDIO" * tag 'mmc-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (73 commits) dt-bindings: mmc: Correct the type of the clk phase properties Revert "mmc: tmio: remove workaround for NON_REMOVABLE" memstick: Fix Kconfig indentation mmc: sdhci-of-arasan: Add support for ZynqMP Platform Tap Delays Setup dt-bindings: mmc: arasan: Document 'xlnx,zynqmp-8.9a' controller firmware: xilinx: Add SDIO Tap Delay nodes mmc: sdhci-of-arasan: Add support to set clock phase delays for SD dt-bindings: mmc: Add optional generic properties for mmc mmc: sdhci-of-arasan: Add sampling clock for a phy to use dt-bindings: mmc: arasan: Update Documentation for the input clock mmc: sdhci-of-arasan: Separate out clk related data to another structure mmc: sdhci: Fix grammar in warning message mmc: sdhci-of-aspeed: add inversion signal presence mmc: sdhci-of-aspeed: enable CONFIG_MMC_SDHCI_IO_ACCESSORS mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E mmc: core: Fix size overflow for mmc partitions mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition mmc: core: fix wl1251 sdio quirks ...

drivers: net: Fix Kconfig indentation, continued

2019-11-21T19:54:09+00:00

Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc). Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller

net: wireless: ti: remove local VENDOR_ID and DEVICE_ID definitions

2019-11-15T08:59:19+00:00

They are already included from mmc/sdio_ids.h and do not need a local definition. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller Acked-by: Kalle Valo Cc: # v4.11+ Signed-off-by: Ulf Hansson

net: wireless: ti: wl1251 use new SDIO_VENDOR_ID_TI_WL1251 definition

2019-11-15T08:59:19+00:00

SDIO_VENDOR_ID_TI_WL1251 is now defined in mmc/sdio_ids.h separately from SDIO_VENDOR_ID_TI for wl1271. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller Acked-by: Kalle Valo Cc: # v4.11+ Signed-off-by: Ulf Hansson

net: wireless: ti: wl1251 add device tree support

2019-11-15T09:01:43+00:00

We will have the wl1251 defined as a child node of the mmc interface and can read setup for gpios, interrupts and the ti,use-eeprom property from there instead of pdata to be provided by pdata-quirks. Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel") Signed-off-by: H. Nikolaus Schaller Acked-by: Kalle Valo Cc: # v4.7+ [Ulf: Fixed up some complaints from checkpatch] Signed-off-by: Ulf Hansson

Merge tag 'wireless-drivers-next-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

2019-11-06T02:36:35+00:00

Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller

net: Fix misspellings of "configure" and "configuration"

2019-10-28T20:41:01+00:00

Fix various misspellings of "configuration" and "configure". Signed-off-by: Geert Uytterhoeven Acked-by: Kalle Valo Signed-off-by: David S. Miller

wlcore: clean-up clearing of WL1271_FLAG_IRQ_RUNNING

2019-10-11T08:55:40+00:00

We set WL1271_FLAG_IRQ_RUNNING in the beginning of wlcore_irq(), but clear it before interrupt handling is done in wlcore_irq_locked(). Let's move the clearing to the end of wlcore_irq() where it gets set, and remove the old comments about hardirq. That's no longer the case as we're using request_threaded_irq(). Note that the WL1271_FLAG_IRQ_RUNNING should never race between the interrupt handler and wlcore_runtime_resume() as because of autosuspend timeout we cannot enter idle between wlcore_irq_locked() and the end of wlcore_irq(). Cc: Anders Roxell Cc: Eyal Reizer Cc: Guy Mishol Cc: John Stultz Cc: Ulf Hansson Signed-off-by: Tony Lindgren Signed-off-by: Kalle Valo