kernel/linux.git/drivers/net/wireless/ti, branch linux-4.20.y

wlcore: sdio: Fixup power on/off sequence

2019-03-13T21:04:10+00:00

[ Upstream commit 13e62626c578d9889ebbda7c521be5adff9bef8e ] During "wlan-up", we are programming the FW into the WiFi-chip. However, re-programming the FW doesn't work, unless a power cycle of the WiFi-chip is made in-between the programmings. To conform to this requirement and to fix the regression in a simple way, let's start by allowing that the SDIO card (WiFi-chip) may stay powered on (runtime resumed) when wl12xx_sdio_power_off() returns. The intent with the current code is to treat this scenario as an error, but unfortunate this doesn't work as expected, so let's fix this. The other part is to guarantee that a power cycle of the SDIO card has been completed when wl12xx_sdio_power_on() returns, as to allow the FW programming to succeed. However, relying solely on runtime PM to deal with this isn't sufficient. For example, userspace may prevent runtime suspend via sysfs for the device that represents the SDIO card, leading to that the mmc core also keeps it powered on. For this reason, let's instead do a brute force power cycle in wl12xx_sdio_power_on(). Fixes: 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling") Signed-off-by: Ulf Hansson Tested-by: Tony Lindgren Tested-by: Anders Roxell Signed-off-by: Ulf Hansson Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

wlcore: Fixup "Add support for optional wakeirq"

2018-11-06T16:44:36+00:00

After commit 3c83dd577c7f ("wlcore: Add support for optional wakeirq") landed upstream, I started seeing the following oops on my HiKey board: [ 1.870279] Unable to handle kernel read from unreadable memory at virtual address 0000000000000010 [ 1.870283] Mem abort info: [ 1.870287] ESR = 0x96000005 [ 1.870292] Exception class = DABT (current EL), IL = 32 bits [ 1.870296] SET = 0, FnV = 0 [ 1.870299] EA = 0, S1PTW = 0 [ 1.870302] Data abort info: [ 1.870306] ISV = 0, ISS = 0x00000005 [ 1.870309] CM = 0, WnR = 0 [ 1.870312] [0000000000000010] user address but active_mm is swapper [ 1.870318] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.870327] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 4.19.0-05129-gb3d1e8e #48 [ 1.870331] Hardware name: HiKey Development Board (DT) [ 1.870350] Workqueue: events_freezable mmc_rescan [ 1.870358] pstate: 60400005 (nZCv daif +PAN -UAO) [ 1.870366] pc : wl1271_probe+0x210/0x350 [ 1.870371] lr : wl1271_probe+0x210/0x350 [ 1.870374] sp : ffffff80080739b0 [ 1.870377] x29: ffffff80080739b0 x28: 0000000000000000 [ 1.870384] x27: 0000000000000000 x26: 0000000000000000 [ 1.870391] x25: 0000000000000036 x24: ffffffc074ecb598 [ 1.870398] x23: ffffffc07ffdce78 x22: ffffffc0744ed808 [ 1.870404] x21: ffffffc074ecbb98 x20: ffffff8008ff9000 [ 1.870411] x19: ffffffc0744ed800 x18: ffffff8008ff9a48 [ 1.870418] x17: 0000000000000000 x16: 0000000000000000 [ 1.870425] x15: ffffffc074ecb503 x14: ffffffffffffffff [ 1.870431] x13: ffffffc074ecb502 x12: 0000000000000030 [ 1.870438] x11: 0101010101010101 x10: 0000000000000040 [ 1.870444] x9 : ffffffc075400248 x8 : ffffffc075400270 [ 1.870451] x7 : 0000000000000000 x6 : 0000000000000000 [ 1.870457] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.870463] x3 : 0000000000000000 x2 : 0000000000000000 [ 1.870469] x1 : 0000000000000028 x0 : 0000000000000000 [ 1.870477] Process kworker/0:0 (pid: 5, stack limit = 0x(____ptrval____)) [ 1.870480] Call trace: [ 1.870485] wl1271_probe+0x210/0x350 [ 1.870491] sdio_bus_probe+0x100/0x128 [ 1.870500] really_probe+0x1a8/0x2b8 [ 1.870506] driver_probe_device+0x58/0x100 [ 1.870511] __device_attach_driver+0x94/0xd8 [ 1.870517] bus_for_each_drv+0x70/0xc8 [ 1.870522] __device_attach+0xe0/0x140 [ 1.870527] device_initial_probe+0x10/0x18 [ 1.870532] bus_probe_device+0x94/0xa0 [ 1.870537] device_add+0x374/0x5b8 [ 1.870542] sdio_add_func+0x60/0x88 [ 1.870546] mmc_attach_sdio+0x1b0/0x358 [ 1.870551] mmc_rescan+0x2cc/0x390 [ 1.870558] process_one_work+0x12c/0x320 [ 1.870563] worker_thread+0x48/0x458 [ 1.870569] kthread+0xf8/0x128 [ 1.870575] ret_from_fork+0x10/0x18 [ 1.870583] Code: 92400c21 b2760021 a90687a2 97e95bf9 (f9400803) [ 1.870587] ---[ end trace 1e15f81d3c139ca9 ]--- It seems since we don't have a wakeirq value in the dts, the wakeirq value in wl1271_probe() is zero, which then causes trouble in irqd_get_trigger_type(irq_get_irq_data(wakeirq)). This patch tries to address this by checking if wakeirq is zero, and not trying to add it to the resources if that is the case. Fixes: 3c83dd577c7f ("wlcore: Add support for optional wakeirq") Cc: Tony Lindgren Cc: Kalle Valo Cc: Eyal Reizer Cc: Anders Roxell Cc: linux-wireless@vger.kernel.org Acked-by: Tony Lindgren Signed-off-by: John Stultz Tested-by: Anders Roxell Signed-off-by: Kalle Valo

wlcore: Add support for optional wakeirq

2018-10-05T08:33:31+00:00

Now with wlcore using PM runtime, we can also add support for Linux generic wakeirq handling for it if configured in the dts file. The wakeirq can be configured as the second interrupt in the dts file with interrupts-extended property where it is the padconf irq of the OOB GPIO pin used for wlcore interrupt. Note that eventually we should also allow configuring wlcore to use the SDIO dat1 IRQ for wake-up, and in that case the the wakeirq should be configured to be the padconf interrupt of the dat1 pin and not the padconf interrupt of the OOB GPIO pin. Cc: Eyal Reizer Signed-off-by: Tony Lindgren Signed-off-by: Kalle Valo

wlcore: Fix BUG with clear completion on timeout

2018-10-05T08:33:04+00:00

We do not currently clear wl->elp_compl on ELP timeout and we have bogus lingering pointer that wlcore_irq then will try to access after recovery is done: BUG: spinlock bad magic on CPU#1, irq/255-wl12xx/580 ... (spin_dump) from [] (do_raw_spin_lock+0xc8/0x124) (do_raw_spin_lock) from [] (_raw_spin_lock_irqsave+0x68/0x74) (_raw_spin_lock_irqsave) from [] (complete+0x24/0x58) (complete) from [] (wlcore_irq+0x48/0x17c [wlcore]) (wlcore_irq [wlcore]) from [] (irq_thread_fn+0x2c/0x64) (irq_thread_fn) from [] (irq_thread+0x148/0x290) (irq_thread) from [] (kthread+0x160/0x17c) (kthread) from [] (ret_from_fork+0x14/0x20) ... After that the system will hang. Let's fix this by adding a flag for recovery and moving the recovery work call to to the error handling section. And we want to set WL1271_FLAG_INTENDED_FW_RECOVERY and actually clear it too in wl1271_recovery_work() and just downgrade the error to a warning to prevent overly verbose output. Cc: Eyal Reizer Signed-off-by: Tony Lindgren Signed-off-by: Kalle Valo

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2018-08-18T18:04:51+00:00

Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...

wlcore: Set rx_status boottime_ns field on rx

2018-07-31T07:24:10+00:00

When receiving a beacon or probe response, we should update the boottime_ns field which is the timestamp the frame was received at. (cf mac80211.h) This fixes a scanning issue with Android since it relies on this timestamp to determine when the AP has been seen for the last time (via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter). Signed-off-by: Loic Poulain Signed-off-by: Kalle Valo

wlcore: remove duplicate \n for some warnings

2018-07-31T07:23:18+00:00

wl1271_warning() already appends a \n to the format, so adding one to the warning string gives empty lines in the log. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Kalle Valo

headers: separate linux/mod_devicetable.h from linux/platform_device.h

2018-07-07T15:52:26+00:00

At over 4000 #includes, is the 9th most #included header file in the Linux kernel. It does not need , so drop that header and explicitly add to source files that need it. 4146 #include After this patch, there are 225 files that use , for a reduction of around 3900 times that does not have to be read & parsed. 225 #include This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap Reported-by: kbuild test robot # drivers/media/platform/vimc/ Reported-by: kbuild test robot # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman

wlcore: Fix memory leak in wlcore_cmd_wait_for_event_or_timeout

2018-07-04T15:14:09+00:00

In case memory resources for *events_vector* were allocated, release them before return. Addresses-Coverity-ID: 1470194 ("Resource leak") Fixes: 4ec7cece87b3 ("wlcore: Add missing PM call for wlcore_cmd_wait_for_event_or_timeout()") Signed-off-by: Gustavo A. R. Silva Acked-by: Tony Lindgren Signed-off-by: Kalle Valo

wireless-drivers: use BIT_ULL for NL80211_STA_INFO_ attribute types

2018-06-27T16:07:39+00:00

The BIT macro uses unsigned long which some architectures handle as 32 bit and therefore might cause macro's shift to overflow when used on a value equals or larger than 32 (NL80211_STA_INFO_RX_DURATION and afterwards). Since 'filled' member in station_info changed to u64, BIT_ULL macro should be used with all NL80211_STA_INFO_* attribute types instead of BIT to prevent future possible bugs when one will use BIT macro for higher attributes by mistake. This commit cleans up all usages of BIT macro with the above field in wireless-drivers by changing it to BIT_ULL instead. In addition, there are some places which don't use BIT nor BIT_ULL macros so align those as well. Signed-off-by: Omer Efrat Signed-off-by: Kalle Valo