kernel/linux.git/drivers/net/wireless/silabs, branch v6.6.132

wifi: wfx: Fix error handling in wfx_core_init()

2024-12-09T09:32:07+00:00

[ Upstream commit 3b88a9876779b55478a4dde867e73f7a100ffa23 ] The wfx_core_init() returns without checking the retval from sdio_register_driver(). If the sdio_register_driver() failed, the module failed to install, leaving the wfx_spi_driver not unregistered. Fixes: a7a91ca5a23d ("staging: wfx: add infrastructure for new driver") Signed-off-by: Yuan Can Reviewed-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20241022090453.84679-1-yuancan@huawei.com Signed-off-by: Sasha Levin

wifi: wfx: repair open network AP mode

2024-09-04T11:28:19+00:00

commit 6d30bb88f623526197c0e18a366e68a4254a2c83 upstream. RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: stable@vger.kernel.org Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin Reviewed-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com Signed-off-by: Greg Kroah-Hartman

wifi: wfx: fix memory leak when starting AP

2024-03-26T22:19:27+00:00

[ Upstream commit b8cfb7c819dd39965136a66fe3a7fde688d976fc ] Kmemleak reported this error: unreferenced object 0xd73d1180 (size 184): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................ backtrace: [<5ca11420>] kmem_cache_alloc+0x20c/0x5ac [<127bdd74>] __alloc_skb+0x144/0x170 [] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [] netlink_sendmsg+0x1e8/0x428 [] ____sys_sendmsg+0x1e0/0x274 [] ___sys_sendmsg+0x80/0xb4 [<69954f45>] __sys_sendmsg+0x64/0xa8 unreferenced object 0xce087000 (size 1024): comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<9a993714>] __kmalloc_track_caller+0x230/0x600 [] kmalloc_reserve.constprop.0+0x30/0x74 [] __alloc_skb+0xa0/0x170 [] __netdev_alloc_skb+0x50/0x180 [<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211] [<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211] [<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx] [<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211] [] nl80211_start_ap+0x76c/0x9e0 [cfg80211] [<47bd8b68>] genl_rcv_msg+0x198/0x378 [<453ef796>] netlink_rcv_skb+0xd0/0x130 [<6b7c977a>] genl_rcv+0x34/0x44 [<66b2d04d>] netlink_unicast+0x1b4/0x258 [] netlink_sendmsg+0x1e8/0x428 [] ____sys_sendmsg+0x1e0/0x274 [] ___sys_sendmsg+0x80/0xb4 However, since the kernel is build optimized, it seems the stack is not accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue is obvious in this function: memory allocated by ieee80211_beacon_get() is never released. Fixing this leak makes kmemleak happy. Reported-by: Ulrich Mohr Co-developed-by: Ulrich Mohr Signed-off-by: Ulrich Mohr Fixes: 268bceec1684 ("staging: wfx: fix BA when device is AP and MFP is enabled") Signed-off-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://msgid.link/20240202164213.1606145-1-jerome.pouiller@silabs.com Signed-off-by: Sasha Levin

wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()

2024-02-05T20:14:22+00:00

[ Upstream commit fe0a7776d4d19e613bb8dd80fe2d78ae49e8b49d ] Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()' should check the return value before examining skb data. So convert the latter to return an appropriate error code and propagate it to return from 'wfx_start_ap()' as well. Compile tested only. Signed-off-by: Dmitry Antipov Tested-by: Jérôme Pouiller Acked-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231204171130.141394-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin

wifi: wfx: fix case where rates are out of order

2023-11-20T10:59:00+00:00

[ Upstream commit ea2274ab0b18549dbf0e755e41d8c5e8b5232dc3 ] When frames are sent over the air, the device always applies the data rates in descending order. The driver assumed Minstrel also provided rate in descending order. However, in some cases, Minstrel can a choose a fallback rate greater than the primary rate. In this case, the two rates was inverted, the device try highest rate first and we get many retries. Since the device always applies rates in descending order, the workaround is to drop the rate when it higher than its predecessor in the rate list. Thus [ 4, 5, 3 ] becomes [ 4, 3 ]. This patch has been tested in isolated room with a series of attenuators. Here are the Minstrel statistics with 80dBm of attenuation: Without the fix: best ____________rate__________ ____statistics___ _____last____ ______sum-of________ mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts] HT20 LGI 1 S MCS0 0 1477 5.6 5.2 82.7 3 0 0 3 4 HT20 LGI 1 MCS1 1 738 10.6 0.0 0.0 0 0 0 0 1 HT20 LGI 1 D MCS2 2 492 14.9 13.5 81.5 5 0 0 5 9 HT20 LGI 1 C MCS3 3 369 18.8 17.6 84.3 5 0 0 76 96 HT20 LGI 1 A P MCS4 4 246 25.4 22.4 79.5 5 0 0 11268 14026 HT20 LGI 1 B S MCS5 5 185 30.7 19.7 57.7 5 8 9 3918 9793 HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 5 0 0 6 102 HT20 LGI 1 MCS7 7 148 35.1 0.0 0.0 0 0 0 0 44 With the fix: best ____________rate__________ ____statistics___ _____last____ ______sum-of________ mode guard # rate [name idx airtime max_tp] [avg(tp) avg(prob)] [retry|suc|att] [#success | #attempts] HT20 LGI 1 S MCS0 0 1477 5.6 1.8 28.6 1 0 0 1 5 HT20 LGI 1 DP MCS1 1 738 10.6 9.7 82.6 4 0 0 14 34 HT20 LGI 1 MCS2 2 492 14.9 9.2 55.4 5 0 0 52 77 HT20 LGI 1 B S MCS3 3 369 18.8 15.6 74.9 5 1 1 417 554 HT20 LGI 1 A MCS4 4 246 25.4 16.7 59.2 5 1 1 13812 17951 HT20 LGI 1 C S MCS5 5 185 30.7 14.0 41.0 5 1 5 57 640 HT20 LGI 1 MCS6 6 164 33.0 0.0 0.0 0 0 1 0 48 HT20 LGI 1 S MCS7 7 148 35.1 0.0 0.0 0 0 0 0 36 We can notice the device try now to send with lower rates (and high success rates). At the end, we measured 20-25% better throughput with this patch. Fixes: 9bca45f3d692 ("staging: wfx: allow to send 802.11 frames") Tested-by: Olivier Souloumiac Tested-by: Alexandr Suslenko Reported-by: Alexandr Suslenko Co-developed-by: Jérôme Pouiller Signed-off-by: Jérôme Pouiller Signed-off-by: Felipe Negrelli Wolter Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231004123039.157112-1-jerome.pouiller@silabs.com Signed-off-by: Sasha Levin

wifi: wfx: Use devm_kmemdup to replace devm_kmalloc + memcpy

2023-08-23T11:09:23+00:00

Use the helper function devm_kmemdup() rather than duplicating its implementation, which helps to enhance code readability. Signed-off-by: Li Zetao Reviewed-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230810114939.2104013-1-lizetao1@huawei.com

wifi: drivers: Explicitly include correct DT includes

2023-08-01T14:48:38+00:00

The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230724211914.805876-1-robh@kernel.org

Merge tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2023-04-27T18:02:26+00:00

Pull spi updates from Mark Brown: "A fairly standard release for SPI with the exception of a change to the API for specifying chip selects done in preparation for supporting devices with more than one chip select, this required some mechanical changes throughout the tree which have been cooking in -next happily for a while. There's also a new API to allow us to support TPM chips on half duplex controllers. Summary: - Refactoring in preparation for supporting multiple chip selects for a single device, needed by some flash devices, which required a change in the SPI device API visible throughout the tree - Support for hardware assisted interaction with SPI TPMs on half duplex controllers, implemented on nVidia Tedra210 QuadSPI - Optimisation for large transfers on fsl-cpm devices - Cleanups around device property use which fix some sisues with fwnode - Use of both void remove() and devm_platform_.*ioremap_resource() - Support for AMD Pensando Elba, Amlogic A1, Cadence device mode, Intel MetorLake-S and StarFive J7110 QuadSPI" * tag 'spi-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (185 commits) spi: bcm63xx: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: tegra210-quad: Enable TPM wait polling spi: Add TPM HW flow flag spi: bcm63xx: remove PM_SLEEP based conditional compilation spi: cadence-quadspi: use macro DEFINE_SIMPLE_DEV_PM_OPS spi: spi-cadence: Add support for Slave mode spi: spi-cadence: Switch to spi_controller structure spi: cadence-quadspi: fix suspend-resume implementations spi: dw: Add support for AMD Pensando Elba SoC spi: dw: Add AMD Pensando Elba SoC SPI Controller spi: cadence-quadspi: Disable the SPI before reconfiguring spi: cadence-quadspi: Update the read timeout based on the length spi: spi-loopback-test: Add module param for iteration length spi: add support for Amlogic A1 SPI Flash Controller dt-bindings: spi: add Amlogic A1 SPI controller spi: fsl-spi: No need to check transfer length versus word size spi: fsl-spi: Change mspi_apply_cpu_mode_quirks() to void spi: fsl-cpm: Use 16 bit mode for large transfers with even size spi: fsl-spi: Re-organise transfer bits_per_word adaptation spi: fsl-spi: Fix CPM/QE mode Litte Endian ...

net: Replace all spi->chip_select and spi->cs_gpiod references with function call

2023-03-11T12:34:02+00:00

Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod members of struct spi_device to be an array. But changing the type of these members to array would break the spi driver functionality. To make the transition smoother introduced four new APIs to get/set the spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and spi->cs_gpiod references with get or set API calls. While adding multi-cs support in further patches the chip_select & cs_gpiod members of the spi_device structure would be converted to arrays & the "idx" parameter of the APIs would be used as array index i.e., spi->chip_select[idx] & spi->cs_gpiod[idx] respectively. Signed-off-by: Amit Kumar Mahapatra Reviewed-by: Michal Simek Link: https://lore.kernel.org/r/20230310173217.3429788-3-amit.kumar-mahapatra@amd.com Signed-off-by: Mark Brown

wifi: wfx: Remove some dead code

2023-02-22T12:28:27+00:00

wait_for_completion_timeout() can not return a <0 value. So simplify the logic and remove dead code. -ERESTARTSYS can not be returned by do_wait_for_common() for tasks with TASK_UNINTERRUPTIBLE, which is the case for wait_for_completion_timeout() Signed-off-by: Christophe JAILLET Reviewed-by: Jérôme Pouiller Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/809c4a645c8d1306c0d256345515865c40ec731c.1676464422.git.christophe.jaillet@wanadoo.fr