kernel/linux.git/drivers/net/wireless/rt2x00, branch v3.4.52

rt2x00: rt2x00pci_regbusy_read() - only print register access failure once

2013-04-12T16:38:47+00:00

commit 83589b30f1e1dc9898986293c9336b8ce1705dec upstream. BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Signed-off-by: Tim Gardner Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: "John W. Linville" Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2x00: error in configurations with mesh support disabled

2013-03-28T19:12:28+00:00

commit 6ef9e2f6d12ce9e2120916804d2ddd46b954a70b upstream. If CONFIG_MAC80211_MESH is not set, cfg80211 will now allow advertising interface combinations with NL80211_IFTYPE_MESH_POINT present. Add appropriate ifdefs to avoid running into errors. [Backported for 3.8-stable. Removed code of simultaneous AP and mesh mode added in 4a5fc6d 3.9-rc1.] Signed-off-by: Felix Fietkau Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville Signed-off-by: Lingzhu Xiang Reviewed-by: CAI Qian Signed-off-by: Greg Kroah-Hartman

rt2800: validate step value for temperature compensation

2012-11-17T21:15:55+00:00

commit bf7e1abe434ba9e22e8dc04a4cba4ab504b788b8 upstream. Some hardware has correct (!= 0xff) value of tssi_bounds[4] in the EEPROM, but step is equal to 0xff. This results on ridiculous delta calculations and completely broke TX power settings. Reported-and-tested-by: Pavel Lucik Signed-off-by: Stanislaw Gruszka Acked-by: Ivo van Doorn Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2800usb: Added rx packet length validity check

2012-10-02T17:30:20+00:00

commit efd5d6b03bd9c9e0df646c56fb5f4f3e25e5c1ac upstream. On our system (ARM Cortex-M3 SOC running linux-2.6.33) frequent crashes were observed in the rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone() so that the bad packet condition would be noticed. The fix was tested on the latest compat-wireless-3.5.1-1-snpc. Signed-off-by: Sergei Poselenov Acked-by: Ivo van Doorn Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2x00: Fix rfkill polling prior to interface start.

2012-10-02T17:30:12+00:00

commit a396e10019eaf3809b0219c966865aaafec12630 upstream. We need to program the rfkill switch GPIO pin direction to input at device initialization time, not only when the interface is brought up. Doing this only when the interface is brought up could lead to rfkill detecting the switch is turned on erroneously and inability to create the interface and bringing it up. Reported-and-tested-by: Andreas Messer Signed-off-by: Gertjan van Wingerde Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2x00: Fix word size of rt2500usb MAC_CSR19 register.

2012-10-02T17:30:10+00:00

commit 6ced58a5dbb94dbfbea1b33ca3c56d1e929cd548 upstream. The register is 16 bits wide, not 32. Signed-off-by: Gertjan van Wingerde Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2x00: Identify ASUS USB-N53 device.

2012-10-02T17:30:10+00:00

commit 177ef8360fabdc49ff08d2598c06e7f7a36b53e3 upstream. This is an RT3572 based device. Signed-off-by: Maximilian Engelhardt Signed-off-by: Gertjan van Wingerde Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2x00: Add support for BUFFALO WLI-UC-GNM2 to rt2800usb.

2012-08-26T22:00:45+00:00

commit a769f9577232afe2c754606a83aad85127e7052a upstream. This is a RT3070 based device. Signed-off-by: Jeongdo Son Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt61pci: fix NULL pointer dereference in config_lna_gain

2012-08-15T15:10:34+00:00

commit deee0214def5d8a32b8112f11d9c2b1696e9c0cb upstream. We can not pass NULL libconf->conf->channel to rt61pci_config() as it is dereferenced unconditionally in rt61pci_config_lna_gain() subroutine. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=44361 Reported-and-tested-by: Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman

rt2800usb: 2001:3c17 is an RT3370 device

2012-08-09T15:31:28+00:00

commit 8fd9d059af12786341dec5a688e607bcdb372238 upstream. D-Link DWA-123 rev A1 Signed-off-by: Albert Pool Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman