kernel/linux.git/drivers/net/wireless/ralink, branch v5.10.264

wifi: rt2x00: avoid full teardown before work setup in probe

2026-07-24T13:49:16+00:00

commit 536fb3d739d75a03cb318c0c6fe799425cfea501 upstream. rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized. Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure. This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed. A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack. Fixes: 1ebbc48520a0 ("rt2x00: Introduce concept of driver data in struct rt2x00_dev.") Fixes: 0439f5367c8d ("rt2x00: Move TX/RX work into dedicated workqueue") Cc: stable@vger.kernel.org Signed-off-by: Runyu Xiao Link: https://patch.msgid.link/20260619073104.1809161-1-runyu.xiao@seu.edu.cn Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: rt2x00usb: fix devres lifetime

2026-04-18T08:31:13+00:00

commit 25369b22223d1c56e42a0cd4ac9137349d5a898e upstream. USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind. Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") Cc: stable@vger.kernel.org # 4.7 Cc: Vishal Thanki Signed-off-by: Johan Hovold Acked-by: Stanislaw Gruszka Reviewed-by: Greg Kroah-Hartman Link: https://patch.msgid.link/20260327113219.1313748-1-johan@kernel.org Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: rt2x00: use explicitly signed or unsigned types

2025-10-29T13:01:17+00:00

commit 66063033f77e10b985258126a97573f84bb8d3b4 upstream. On some platforms, `char` is unsigned, but this driver, for the most part, assumed it was signed. In other places, it uses `char` to mean an unsigned number, but only in cases when the values are small. And in still other places, `char` is used as a boolean. Put an end to this confusion by declaring explicit types, depending on the context. Cc: Andrew Morton Cc: Andy Shevchenko Cc: Stanislaw Gruszka Cc: Helmut Schaa Cc: Kalle Valo Signed-off-by: Jason A. Donenfeld Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221019155541.3410813-1-Jason@zx2c4.com Signed-off-by: Eliav Farber Signed-off-by: Greg Kroah-Hartman

wifi: rt2x00: restart beacon queue when hardware reset

2024-02-23T07:42:05+00:00

[ Upstream commit a11d965a218f0cd95b13fe44d0bcd8a20ce134a8 ] When a hardware reset is triggered, all registers are reset, so all queues are forced to stop in hardware interface. However, mac80211 will not automatically stop the queue. If we don't manually stop the beacon queue, the queue will be deadlocked and unable to start again. This patch fixes the issue where Apple devices cannot connect to the AP after calling ieee80211_restart_hw(). Signed-off-by: Shiji Yang Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Sasha Levin

wifi: rt2x00: correctly set BBP register 86 for MT7620

2022-10-26T11:25:47+00:00

[ Upstream commit c9aada64fe6493461127f1522d7e2f01792d2424 ] Instead of 0 set the correct value for BBP register 86 for MT7620. Reported-by: Serge Vasilugin Signed-off-by: Daniel Golle Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/257267247ee4fa7ebc6a5d0c4948b3f8119c0d77.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin

wifi: rt2x00: set SoC wmac clock register

2022-10-26T11:25:47+00:00

[ Upstream commit cbde6ed406a51092d9e8a2df058f5f8490f27443 ] Instead of using the default value 33 (pci), set US_CYC_CNT init based on Programming guide: If available, set chipset bus clock with fallback to cpu clock/3. Reported-by: Serge Vasilugin Signed-off-by: Daniel Golle Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/3e275d259f476f597dab91a9c395015ef3fe3284.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin

wifi: rt2x00: set VGC gain for both chains of MT7620

2022-10-26T11:25:47+00:00

[ Upstream commit 0e09768c085709e10ece3b68f6ac921d3f6a9caa ] Set bbp66 for all chains of the MT7620. Reported-by: Serge Vasilugin Signed-off-by: Daniel Golle Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/29e161397e5c9d9399da0fe87d44458aa2b90a78.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin

wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620

2022-10-26T11:25:47+00:00

[ Upstream commit eeb50acf15762b61921f9df18663f839f387c054 ] Set correct TX_SW_CFG1 MAC register as it is done also in v3 of the vendor driver[1]. [1]: https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 Reported-by: Serge Vasilugin Signed-off-by: Daniel Golle Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/4be38975ce600a34249e12d09a3cb758c6e71071.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin

wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620

2022-10-26T11:25:47+00:00

[ Upstream commit d3aad83d05aec0cfd7670cf0028f2ad4b81de92e ] The function rt2800_iq_calibrate is intended for Rt5592 only. Don't call it for MT7620 which has it's own calibration functions. Reported-by: Serge Vasilugin Signed-off-by: Daniel Golle Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/31a1c34ddbd296b82f38c18c9ae7339059215fdc.1663445157.git.daniel@makrotopia.org Signed-off-by: Sasha Levin

rt2x00: do not mark device gone on EPROTO errors during start

2021-12-08T08:03:20+00:00

commit ed53ae75693096f1c10b4561edd31a07b631bd72 upstream. As reported by Exuvo is possible that we have lot's of EPROTO errors during device start i.e. firmware load. But after that device works correctly. Hence marking device gone by few EPROTO errors done by commit e383c70474db ("rt2x00: check number of EPROTO errors") caused regression - Exuvo device stop working after kernel update. To fix disable the check during device start. Link: https://lore.kernel.org/linux-wireless/bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se/ Reported-and-tested-by: Exuvo Fixes: e383c70474db ("rt2x00: check number of EPROTO errors") Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20211111141003.GA134627@wp.pl Signed-off-by: Greg Kroah-Hartman