kernel/linux.git/drivers/net/wireless/microchip, branch v6.1.87

wifi: wilc1000: revert reset line logic flip

2024-03-26T22:20:37+00:00

[ Upstream commit f3ec643947634bed41b97bd56b248f7c78498eab ] This reverts commit fcf690b0b47494df51d214db5c5a714a400b0257. When using a wilc1000 chip over a spi bus, users can optionally define a reset gpio and a chip enable gpio. The reset line of wilc1000 is active low, so to hold the chip in reset, a low (physical) value must be applied. The corresponding device tree binding documentation was introduced by commit f31ee3c0a555 ("wilc1000: Document enable-gpios and reset-gpios properties") and correctly indicates that the reset line is an active-low signal. The corresponding driver part, brought by commit ec031ac4792c ("wilc1000: Add reset/enable GPIO support to SPI driver") was applying the correct logic. But commit fcf690b0b474 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down") eventually flipped this logic and started misusing the gpiod APIs, applying an inverted logic when powering up/down the chip (for example, setting the reset line to a logic "1" during power up, which in fact asserts the reset line when device tree describes the reset line as GPIO_ACTIVE_LOW). As a consequence, any platform currently using the driver in SPI mode must use a faulty reset line description in device tree, or else chip will be maintained in reset and will not even allow to bring up the chip. Fix reset line usage by inverting back the gpiod APIs usage, setting the reset line to the logic value "0" when powering the chip, and the logic value "1" when powering off the chip. Fixes: fcf690b0b474 ("wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down") Signed-off-by: Alexis Lothoré Acked-by: Conor Dooley Acked-by: Ajay Singh Signed-off-by: Kalle Valo Link: https://msgid.link/20240217-wilc_1000_reset_line-v2-1-b216f433d7d5@bootlin.com Signed-off-by: Sasha Levin

wifi: wilc1000: prevent use-after-free on vif when cleaning up all interfaces

2024-03-26T22:20:35+00:00

[ Upstream commit cb5942b77c05d54310a0420cac12935e9b6aa21c ] wilc_netdev_cleanup currently triggers a KASAN warning, which can be observed on interface registration error path, or simply by removing the module/unbinding device from driver: echo spi0.1 > /sys/bus/spi/drivers/wilc1000_spi/unbind ================================================================== BUG: KASAN: slab-use-after-free in wilc_netdev_cleanup+0x508/0x5cc Read of size 4 at addr c54d1ce8 by task sh/86 CPU: 0 PID: 86 Comm: sh Not tainted 6.8.0-rc1+ #117 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x58 dump_stack_lvl from print_report+0x154/0x500 print_report from kasan_report+0xac/0xd8 kasan_report from wilc_netdev_cleanup+0x508/0x5cc wilc_netdev_cleanup from wilc_bus_remove+0xc8/0xec wilc_bus_remove from spi_remove+0x8c/0xac spi_remove from device_release_driver_internal+0x434/0x5f8 device_release_driver_internal from unbind_store+0xbc/0x108 unbind_store from kernfs_fop_write_iter+0x398/0x584 kernfs_fop_write_iter from vfs_write+0x728/0xf88 vfs_write from ksys_write+0x110/0x1e4 ksys_write from ret_fast_syscall+0x0/0x1c [...] Allocated by task 1: kasan_save_track+0x30/0x5c __kasan_kmalloc+0x8c/0x94 __kmalloc_node+0x1cc/0x3e4 kvmalloc_node+0x48/0x180 alloc_netdev_mqs+0x68/0x11dc alloc_etherdev_mqs+0x28/0x34 wilc_netdev_ifc_init+0x34/0x8ec wilc_cfg80211_init+0x690/0x910 wilc_bus_probe+0xe0/0x4a0 spi_probe+0x158/0x1b0 really_probe+0x270/0xdf4 __driver_probe_device+0x1dc/0x580 driver_probe_device+0x60/0x140 __driver_attach+0x228/0x5d4 bus_for_each_dev+0x13c/0x1a8 bus_add_driver+0x2a0/0x608 driver_register+0x24c/0x578 do_one_initcall+0x180/0x310 kernel_init_freeable+0x424/0x484 kernel_init+0x20/0x148 ret_from_fork+0x14/0x28 Freed by task 86: kasan_save_track+0x30/0x5c kasan_save_free_info+0x38/0x58 __kasan_slab_free+0xe4/0x140 kfree+0xb0/0x238 device_release+0xc0/0x2a8 kobject_put+0x1d4/0x46c netdev_run_todo+0x8fc/0x11d0 wilc_netdev_cleanup+0x1e4/0x5cc wilc_bus_remove+0xc8/0xec spi_remove+0x8c/0xac device_release_driver_internal+0x434/0x5f8 unbind_store+0xbc/0x108 kernfs_fop_write_iter+0x398/0x584 vfs_write+0x728/0xf88 ksys_write+0x110/0x1e4 ret_fast_syscall+0x0/0x1c [...] David Mosberger-Tan initial investigation [1] showed that this use-after-free is due to netdevice unregistration during vif list traversal. When unregistering a net device, since the needs_free_netdev has been set to true during registration, the netdevice object is also freed, and as a consequence, the corresponding vif object too, since it is attached to it as private netdevice data. The next occurrence of the loop then tries to access freed vif pointer to the list to move forward in the list. Fix this use-after-free thanks to two mechanisms: - navigate in the list with list_for_each_entry_safe, which allows to safely modify the list as we go through each element. For each element, remove it from the list with list_del_rcu - make sure to wait for RCU grace period end after each vif removal to make sure it is safe to free the corresponding vif too (through unregister_netdev) Since we are in a RCU "modifier" path (not a "reader" path), and because such path is expected not to be concurrent to any other modifier (we are using the vif_mutex lock), we do not need to use RCU list API, that's why we can benefit from list_for_each_entry_safe. [1] https://lore.kernel.org/linux-wireless/ab077dbe58b1ea5de0a3b2ca21f275a07af967d2.camel@egauge.net/ Fixes: 8399918f3056 ("staging: wilc1000: use RCU list to maintain vif interfaces list") Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240212-wilc_rework_deinit-v1-1-9203ae56c27f@bootlin.com Signed-off-by: Sasha Levin

wifi: wilc1000: fix multi-vif management when deleting a vif

2024-03-26T22:20:30+00:00

[ Upstream commit 12cfc9c8d3faf887a202c89bc312202445fca7e8 ] Adding then removing a second vif currently makes the first vif not working anymore. This is visible for example when we have a first interface connected to some access point: - create a wpa_supplicant.conf with some AP credentials - wpa_supplicant -Dnl80211 -c /etc/wpa_supplicant.conf -i wlan0 - dhclient wlan0 - iw phy phy0 interface add wlan1 type managed - iw dev wlan1 del wlan0 does not manage properly traffic anymore (eg: ping not working) This is due to vif mode being incorrectly reconfigured with some default values in del_virtual_intf, affecting by default first vif. Prevent first vif from being affected on second vif removal by removing vif mode change command in del_virtual_intf Fixes: 9bc061e88054 ("staging: wilc1000: added support to dynamically add/remove interfaces") Signed-off-by: Ajay Singh Co-developed-by: Alexis Lothoré Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240115-wilc_1000_fixes-v1-5-54d29463a738@bootlin.com Signed-off-by: Sasha Levin

wifi: wilc1000: do not realloc workqueue everytime an interface is added

2024-03-26T22:20:30+00:00

[ Upstream commit 328efda22af81130c2ad981c110518cb29ff2f1d ] Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue with a new one. This can be observed with the following commands: for i in $(seq 0 10) do iw phy phy0 interface add wlan1 type managed iw dev wlan1 del done ps -eo pid,comm|grep wlan 39 kworker/R-wlan0 98 kworker/R-wlan1 102 kworker/R-wlan1 105 kworker/R-wlan1 108 kworker/R-wlan1 111 kworker/R-wlan1 114 kworker/R-wlan1 117 kworker/R-wlan1 120 kworker/R-wlan1 123 kworker/R-wlan1 126 kworker/R-wlan1 129 kworker/R-wlan1 Fix this leakage by putting back hif_workqueue allocation in wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to set it lowercase, however it is not attached to a specific netdev, so enforcing netdev name in the name is not so relevant. Still, enrich the name with the wiphy name to make it clear which phy is using the workqueue. Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") Signed-off-by: Ajay Singh Co-developed-by: Alexis Lothoré Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240115-wilc_1000_fixes-v1-3-54d29463a738@bootlin.com Signed-off-by: Sasha Levin

wifi: wilc1000: fix RCU usage in connect path

2024-03-26T22:20:30+00:00

[ Upstream commit 205c50306acf58a335eb19fa84e40140f4fe814f ] With lockdep enabled, calls to the connect function from cfg802.11 layer lead to the following warning: ============================= WARNING: suspicious RCU usage 6.7.0-rc1-wt+ #333 Not tainted ----------------------------- drivers/net/wireless/microchip/wilc1000/hif.c:386 suspicious rcu_dereference_check() usage! [...] stack backtrace: CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333 Hardware name: Atmel SAMA5 unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x34/0x48 dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4 wilc_parse_join_bss_param from connect+0x2c4/0x648 connect from cfg80211_connect+0x30c/0xb74 cfg80211_connect from nl80211_connect+0x860/0xa94 nl80211_connect from genl_rcv_msg+0x3fc/0x59c genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8 netlink_rcv_skb from genl_rcv+0x2c/0x3c genl_rcv from netlink_unicast+0x3b0/0x550 netlink_unicast from netlink_sendmsg+0x368/0x688 netlink_sendmsg from ____sys_sendmsg+0x190/0x430 ____sys_sendmsg from ___sys_sendmsg+0x110/0x158 ___sys_sendmsg from sys_sendmsg+0xe8/0x150 sys_sendmsg from ret_fast_syscall+0x0/0x1c This warning is emitted because in the connect path, when trying to parse target BSS parameters, we dereference a RCU pointer whithout being in RCU critical section. Fix RCU dereference usage by moving it to a RCU read critical section. To avoid wrapping the whole wilc_parse_join_bss_param under the critical section, just use the critical section to copy ies data Fixes: c460495ee072 ("staging: wilc1000: fix incorrent type in initializer") Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com Signed-off-by: Sasha Levin

wifi: wilc1000: fix declarations ordering

2024-03-26T22:20:30+00:00

[ Upstream commit 535733e90e5d8912ebeccebb05b354a2d06ff459 ] Reorder parameters declaration in wilc_parse_join_bss_param to enforce reverse christmas tree Signed-off-by: Alexis Lothoré Signed-off-by: Kalle Valo Link: https://msgid.link/20240105075733.36331-2-alexis.lothore@bootlin.com Stable-dep-of: 205c50306acf ("wifi: wilc1000: fix RCU usage in connect path") Signed-off-by: Sasha Levin

wifi: wilc1000: use vmm_table as array in wilc struct

2023-11-28T17:07:11+00:00

commit 05ac1a198a63ad66bf5ae8b7321407c102d40ef3 upstream. Enabling KASAN and running some iperf tests raises some memory issues with vmm_table: BUG: KASAN: slab-out-of-bounds in wilc_wlan_handle_txq+0x6ac/0xdb4 Write of size 4 at addr c3a61540 by task wlan0-tx/95 KASAN detects that we are writing data beyond range allocated to vmm_table. There is indeed a mismatch between the size passed to allocator in wilc_wlan_init, and the range of possible indexes used later: allocation size is missing a multiplication by sizeof(u32) Fixes: 40b717bfcefa ("wifi: wilc1000: fix DMA on stack objects") Cc: stable@vger.kernel.org Signed-off-by: Ajay Singh Signed-off-by: Alexis Lothoré Reviewed-by: Michael Walle Reviewed-by: Jeff Johnson Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231017-wilc1000_tx_oops-v3-1-b2155f1f7bee@bootlin.com Signed-off-by: Greg Kroah-Hartman

wifi: wilc1000: fix for absent RSN capabilities WFA testcase

2023-07-19T14:21:04+00:00

[ Upstream commit 9ce4bb09123e9754996e358bd808d39f5d112899 ] Mandatory WFA testcase CT_Security_WPA2Personal_STA_RSNEBoundsVerification-AbsentRSNCap, performs bounds verfication on Beacon and/or Probe response frames. It failed and observed the reason to be absence of cipher suite and AKM suite in RSN information. To fix this, enable the RSN flag before extracting RSN capabilities. Fixes: cd21d99e595e ("wifi: wilc1000: validate pairwise and authentication suite offsets") Signed-off-by: Amisha Patel Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230421181005.4865-1-amisha.patel@microchip.com Signed-off-by: Sasha Levin

wifi: wilc1000: add missing unregister_netdev() in wilc_netdev_ifc_init()

2023-03-10T08:32:50+00:00

[ Upstream commit 2b88974ecb358990e1c33fabcd0b9e142bab7f21 ] Fault injection test reports this issue: kernel BUG at net/core/dev.c:10731! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Call Trace: wilc_netdev_ifc_init+0x19f/0x220 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_cfg80211_init+0x30c/0x380 [wilc1000 884bf126e9e98af6a708f266a8dffd53f99e4bf5] wilc_bus_probe+0xad/0x2b0 [wilc1000_spi 1520a7539b6589cc6cde2ae826a523a33f8bacff] spi_probe+0xe4/0x140 really_probe+0x17e/0x3f0 __driver_probe_device+0xe3/0x170 driver_probe_device+0x49/0x120 The root case here is alloc_ordered_workqueue() fails, but cfg80211_unregister_netdevice() or unregister_netdev() not be called in error handling path. To fix add unregister_netdev goto lable to add the unregister operation in error handling path. Fixes: 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") Signed-off-by: Wang Yufen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1669289902-23639-1-git-send-email-wangyufen@huawei.com Signed-off-by: Sasha Levin

wifi: wilc1000: fix potential memory leak in wilc_mac_xmit()

2023-03-10T08:32:49+00:00

[ Upstream commit deb962ec9e1c9a81babd3d37542ad4bd6ac3396e ] The wilc_mac_xmit() returns NETDEV_TX_OK without freeing skb, add dev_kfree_skb() to fix it. Compile tested only. Fixes: c5c77ba18ea6 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by: Zhang Changzhong Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/1668684964-48622-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Sasha Levin