kernel/linux.git/drivers/net/wireless/mediatek, branch v5.10.257

wifi: mt76: fix potential memory leak in mt76_wmac_probe()

2025-10-29T13:01:06+00:00

[ Upstream commit 42754b7de2b1a2cf116c5e3f1e8e78392f4ed700 ] In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory is allocated for both struct ieee80211_hw and a workqueue. However, on the error path, the workqueue is not freed. Fix that by calling mt76_free_device() on the error path. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Abdun Nihaal Reviewed-by: Jiri Slaby Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt76x2: Add support for LiteOn WN4516R,WN4519R

2025-06-27T10:04:17+00:00

[ Upstream commit 3c0e4f606d8693795a2c965d6f4987b1bfc31097 ] Adds support for: - LiteOn WN4516R - LiteOn WN4519R Both use: - A nonstandard USB connector - Mediatek chipset MT7600U - ASIC revision: 76320044 Disabled VHT support on ASIC revision 76320044: This fixes the 5G connectibity issue on LiteOn WN4519R module see https://github.com/openwrt/mt76/issues/971 And may also fix the 5G issues on the XBox One Wireless Adapter see https://github.com/openwrt/mt76/issues/200 I have looked at the FCC info related to the MT7632U chip as mentioned in here: https://github.com/openwrt/mt76/issues/459 These confirm the chipset does not support 'ac' mode and hence VHT should be turned of. Signed-off-by: Henk Vergonet Acked-by: Lorenzo Bianconi Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: disable napi on driver removal

2025-06-04T12:36:57+00:00

commit 78ab4be549533432d97ea8989d2f00b508fa68d8 upstream. A warning on driver removal started occurring after commit 9dd05df8403b ("net: warn if NAPI instance wasn't shut down"). Disable tx napi before deleting it in mt76_dma_cleanup(). WARNING: CPU: 4 PID: 18828 at net/core/dev.c:7288 __netif_napi_del_locked+0xf0/0x100 CPU: 4 UID: 0 PID: 18828 Comm: modprobe Not tainted 6.15.0-rc4 #4 PREEMPT(lazy) Hardware name: ASUS System Product Name/PRIME X670E-PRO WIFI, BIOS 3035 09/05/2024 RIP: 0010:__netif_napi_del_locked+0xf0/0x100 Call Trace: mt76_dma_cleanup+0x54/0x2f0 [mt76] mt7921_pci_remove+0xd5/0x190 [mt7921e] pci_device_remove+0x47/0xc0 device_release_driver_internal+0x19e/0x200 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xb0 __do_sys_delete_module.isra.0+0x197/0x2e0 do_syscall_64+0x7b/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Tested with mt7921e but the same pattern can be actually applied to other mt76 drivers calling mt76_dma_cleanup() during removal. Tx napi is enabled in their *_dma_init() functions and only toggled off and on again inside their suspend/resume/reset paths. So it should be okay to disable tx napi in such a generic way. Found by Linux Verification Center (linuxtesting.org). Fixes: 2ac515a5d74f ("mt76: mt76x02: use napi polling for tx cleanup") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin Tested-by: Ming Yen Hsieh Link: https://patch.msgid.link/20250506115540.19045-1-pchelkin@ispras.ru Signed-off-by: Felix Fietkau Signed-off-by: Greg Kroah-Hartman

wifi: mt76: mt76x2u: add TP-Link TL-WDN6200 ID to device table

2025-05-02T05:40:49+00:00

[ Upstream commit 06cccc2ebbe6c8a20f714f3a0ff3ff489d3004bb ] The TP-Link TL-WDN6200 "Driverless" version cards use a MT7612U chipset. Add the USB ID to mt76x2u driver. Signed-off-by: Icenowy Zheng Link: https://patch.msgid.link/20250317102235.1421726-1-uwu@icenowy.me Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt76u_vendor_request: Do not print error messages when -EPROTO

2025-03-13T11:46:48+00:00

[ Upstream commit f1b1e133a770fcdbd89551651232b034d2f7a27a ] When initializing the network card, unplugging the device will trigger an -EPROTO error, resulting in a flood of error messages being printed frantically. The exception is printed as follows： mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 mt76x2u 2-2.4:1.0: vendor request req:47 off:9018 failed:-71 ... It will continue to print more than 2000 times for about 5 minutes, causing the usb device to be unable to be disconnected. During this period, the usb port cannot recognize the new device because the old device has not disconnected. There may be other operating methods that cause -EPROTO, but -EPROTO is a low-level hardware error. It is unwise to repeat vendor requests expecting to read correct data. It is a better choice to treat -EPROTO and -ENODEV the same way. Similar to commit 9b0f100c1970 ("mt76: usb: process URBs with status EPROTO properly") do no schedule rx_worker for urb marked with status set -EPROTO. I also reproduced this situation when plugging and unplugging the device, and this patch is effective. Just do not vendor request again for urb marked with status set -EPROTO. Link: https://lore.kernel.org/all/531681bd-30f5-4a70-a156-bf8754b8e072@intel.com/ Link: https://lore.kernel.org/all/D4B9CC1FFC0CBAC3+20250105040607.154706-1-wangyuli@uniontech.com/ Fixes: b40b15e1521f ("mt76: add usb support to mt76 layer") Co-developed-by: Xu Rao Signed-off-by: Xu Rao Signed-off-by: WangYuli Link: https://patch.msgid.link/9DD7DE7AAB497CB7+20250113070241.63590-1-wangyuli@uniontech.com Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt7915: fix rx filter setting for bfee functionality

2024-10-17T13:07:40+00:00

[ Upstream commit 6ac80fce713e875a316a58975b830720a3e27721 ] Fix rx filter setting to prevent dropping NDPA frames. Without this change, bfee functionality may behave abnormally. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by: Howard Hsu Link: https://patch.msgid.link/20240827093011.18621-21-nbd@nbd.name Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt7603: rework/fix rx pse hang check

2023-11-20T10:06:45+00:00

[ Upstream commit baa19b2e4b7bbb509a7ca7939c8785477dcd40ee ] It turns out that the code in mt7603_rx_pse_busy() does not detect actual hardware hangs, it only checks for busy conditions in PSE. A reset should only be performed if these conditions are true and if there is no rx activity as well. Reset the counter whenever a rx interrupt occurs. In order to also deal with a fully loaded CPU that leaves interrupts disabled with continuous NAPI polling, also check for pending rx interrupts in the function itself. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt76x02: fix MT76x0 external LNA gain handling

2023-10-10T19:53:37+00:00

[ Upstream commit 684e45e120b82deccaf8b85633905304a3bbf56d ] On MT76x0, LNA gain should be applied for both external and internal LNA. On MT76x2, LNA gain should be treated as 0 for external LNA. Move the LNA type based logic to mt76x2 in order to fix mt76x0. Fixes: 2daa67588f34 ("mt76x0: unify lna_gain parsing") Reported-by: Shiji Yang Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230919194747.31647-1-nbd@nbd.name Signed-off-by: Sasha Levin

wifi: mt76: testmode: add nla_policy for MT76_TM_ATTR_TX_LENGTH

2023-09-19T10:20:08+00:00

[ Upstream commit 74f12d511625e603fac8c0c2b6872e687e56dd61 ] It seems that the nla_policy in mt76_tm_policy is missed for attribute MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make sure the u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]); in function mt76_testmode_cmd() is safe and will not result in out-of-attribute read. Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

wifi: mt76: mt7615: do not advertise 5 GHz on first phy of MT7615D (DBDC)

2023-08-11T09:57:56+00:00

[ Upstream commit 421033deb91521aa6a9255e495cb106741a52275 ] On DBDC devices the first (internal) phy is only capable of using 2.4 GHz band, and the 5 GHz band is exposed via a separate phy object, so avoid the false advertising. Reported-by: Rani Hod Closes: https://github.com/openwrt/openwrt/pull/12361 Fixes: 7660a1bd0c22 ("mt76: mt7615: register ext_phy if DBDC is detected") Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser Reviewed-by: Simon Horman Acked-by: Felix Fietkau Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230605073408.8699-1-fercerpav@gmail.com Signed-off-by: Sasha Levin