kernel/linux.git/drivers/net/wireless/intel, branch v6.1.124

wifi: ipw2x00: libipw_rx_any(): fix bad alignment

2024-12-14T18:54:44+00:00

[ Upstream commit 4fa4f049dc0d9741b16c96bcbf0108c85368a2b9 ] This patch fixes incorrect code alignment. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882. ./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900. Reported-by: Abaci Robot Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381 Signed-off-by: Jiapeng Chong Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: avoid NULL pointer dereference

2024-12-14T18:53:55+00:00

commit 557a6cd847645e667f3b362560bd7e7c09aac284 upstream. iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta pointer is not NULL. It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is dereferencing the ieee80211_sta pointer. If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL pointer. Fix this by checking the sta pointer before retrieving the mvmsta from it. If sta is not NULL, then mvmsta isn't either. Signed-off-by: Miri Korenblit Reviewed-by: Johannes Berg Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Xiangyu Chen Signed-off-by: Greg Kroah-Hartman

wifi: iwlwifi: mvm: Use the sync timepoint API in suspend

2024-12-14T18:53:08+00:00

[ Upstream commit 9715246ca0bfc9feaec1b4ff5b3d38de65a7025d ] When starting the suspend flow, HOST_D3_START triggers an _async_ firmware dump collection for debugging purposes. The async worker may race with suspend flow and fail to get NIC access, resulting in the following warning: "Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)" Fix this by switching to the sync version to ensure the dump completes before proceeding with the suspend flow, avoiding potential race issues. Signed-off-by: Daniel Gabay Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: fix 6 GHz scan construction

2024-11-08T15:26:48+00:00

commit 7245012f0f496162dd95d888ed2ceb5a35170f1a upstream. If more than 255 colocated APs exist for the set of all APs found during 2.4/5 GHz scanning, then the 6 GHz scan construction will loop forever since the loop variable has type u8, which can never reach the number found when that's bigger than 255, and is stored in a u32 variable. Also move it into the loops to have a smaller scope. Using a u32 there is fine, we limit the number of APs in the scan list and each has a limit on the number of RNR entries due to the frame size. With a limit of 1000 scan results, a frame size upper bound of 4096 (really it's more like ~2300) and a TBTT entry size of at least 11, we get an upper bound for the number of ~372k, well in the bounds of a u32. Cc: stable@vger.kernel.org Fixes: eae94cf82d74 ("iwlwifi: mvm: add support for 6GHz") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375 Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

wifi: iwlegacy: Clear stale interrupts before resuming device

2024-11-08T15:26:45+00:00

commit 07c90acb071b9954e1fecb1e4f4f13d12c544b34 upstream. iwl4965 fails upon resume from hibernation on my laptop. The reason seems to be a stale interrupt which isn't being cleared out before interrupts are enabled. We end up with a race beween the resume trying to bring things back up, and the restart work (queued form the interrupt handler) trying to bring things down. Eventually the whole thing blows up. Fix the problem by clearing out any stale interrupts before interrupts get enabled during resume. Here's a debug log of the indicent: [ 12.042589] ieee80211 phy0: il_isr ISR inta 0x00000080, enabled 0xaa00008b, fh 0x00000000 [ 12.042625] ieee80211 phy0: il4965_irq_tasklet inta 0x00000080, enabled 0x00000000, fh 0x00000000 [ 12.042651] iwl4965 0000:10:00.0: RF_KILL bit toggled to enable radio. [ 12.042653] iwl4965 0000:10:00.0: On demand firmware reload [ 12.042690] ieee80211 phy0: il4965_irq_tasklet End inta 0x00000000, enabled 0xaa00008b, fh 0x00000000, flags 0x00000282 [ 12.052207] ieee80211 phy0: il4965_mac_start enter [ 12.052212] ieee80211 phy0: il_prep_station Add STA to driver ID 31: ff:ff:ff:ff:ff:ff [ 12.052244] ieee80211 phy0: il4965_set_hw_ready hardware ready [ 12.052324] ieee80211 phy0: il_apm_init Init card's basic functions [ 12.052348] ieee80211 phy0: il_apm_init L1 Enabled; Disabling L0S [ 12.055727] ieee80211 phy0: il4965_load_bsm Begin load bsm [ 12.056140] ieee80211 phy0: il4965_verify_bsm Begin verify bsm [ 12.058642] ieee80211 phy0: il4965_verify_bsm BSM bootstrap uCode image OK [ 12.058721] ieee80211 phy0: il4965_load_bsm BSM write complete, poll 1 iterations [ 12.058734] ieee80211 phy0: __il4965_up iwl4965 is coming up [ 12.058737] ieee80211 phy0: il4965_mac_start Start UP work done. [ 12.058757] ieee80211 phy0: __il4965_down iwl4965 is going down [ 12.058761] ieee80211 phy0: il_scan_cancel_timeout Scan cancel timeout [ 12.058762] ieee80211 phy0: il_do_scan_abort Not performing scan to abort [ 12.058765] ieee80211 phy0: il_clear_ucode_stations Clearing ucode stations in driver [ 12.058767] ieee80211 phy0: il_clear_ucode_stations No active stations found to be cleared [ 12.058819] ieee80211 phy0: _il_apm_stop Stop card, put in low power state [ 12.058827] ieee80211 phy0: _il_apm_stop_master stop master [ 12.058864] ieee80211 phy0: il4965_clear_free_frames 0 frames on pre-allocated heap on clear. [ 12.058869] ieee80211 phy0: Hardware restart was requested [ 16.132299] iwl4965 0000:10:00.0: START_ALIVE timeout after 4000ms. [ 16.132303] ------------[ cut here ]------------ [ 16.132304] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 16.132338] WARNING: CPU: 0 PID: 181 at net/mac80211/util.c:1826 ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132390] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.132456] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Not tainted 6.11.0-cl+ #143 [ 16.132460] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.132463] Workqueue: async async_run_entry_fn [ 16.132469] RIP: 0010:ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132501] Code: da 02 00 00 c6 83 ad 05 00 00 00 48 89 df e8 98 1b fc ff 85 c0 41 89 c7 0f 84 e9 02 00 00 48 c7 c7 a0 e6 48 a0 e8 d1 77 c4 e0 <0f> 0b eb 2d 84 c0 0f 85 8b 01 00 00 c6 87 ad 05 00 00 00 e8 69 1b [ 16.132504] RSP: 0018:ffffc9000029fcf0 EFLAGS: 00010282 [ 16.132507] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: 0000000000000001 [ 16.132509] RDX: ffffffff81f21a18 RSI: 0000000000000086 RDI: 0000000000000001 [ 16.132510] RBP: ffff8880072003c0 R08: 0000000000000000 R09: 0000000000000003 [ 16.132512] R10: 0000000000000000 R11: ffff88807e5b0000 R12: 0000000000000001 [ 16.132514] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000ffffff92 [ 16.132515] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.132517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.132519] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.132521] Call Trace: [ 16.132525] [ 16.132526] ? __warn+0x77/0x120 [ 16.132532] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132564] ? report_bug+0x15c/0x190 [ 16.132568] ? handle_bug+0x36/0x70 [ 16.132571] ? exc_invalid_op+0x13/0x60 [ 16.132573] ? asm_exc_invalid_op+0x16/0x20 [ 16.132579] ? ieee80211_reconfig+0x8f/0x14b0 [mac80211] [ 16.132611] ? snd_hdac_bus_init_cmd_io+0x24/0x200 [snd_hda_core] [ 16.132617] ? pick_eevdf+0x133/0x1c0 [ 16.132622] ? check_preempt_wakeup_fair+0x70/0x90 [ 16.132626] ? wakeup_preempt+0x4a/0x60 [ 16.132628] ? ttwu_do_activate.isra.0+0x5a/0x190 [ 16.132632] wiphy_resume+0x79/0x1a0 [cfg80211] [ 16.132675] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.132697] dpm_run_callback+0x75/0x1b0 [ 16.132703] device_resume+0x97/0x200 [ 16.132707] async_resume+0x14/0x20 [ 16.132711] async_run_entry_fn+0x1b/0xa0 [ 16.132714] process_one_work+0x13d/0x350 [ 16.132718] worker_thread+0x2be/0x3d0 [ 16.132722] ? cancel_delayed_work_sync+0x70/0x70 [ 16.132725] kthread+0xc0/0xf0 [ 16.132729] ? kthread_park+0x80/0x80 [ 16.132732] ret_from_fork+0x28/0x40 [ 16.132735] ? kthread_park+0x80/0x80 [ 16.132738] ret_from_fork_asm+0x11/0x20 [ 16.132741] [ 16.132742] ---[ end trace 0000000000000000 ]--- [ 16.132930] ------------[ cut here ]------------ [ 16.132932] WARNING: CPU: 0 PID: 181 at net/mac80211/driver-ops.c:41 drv_stop+0xe7/0xf0 [mac80211] [ 16.132957] Modules linked in: ctr ccm sch_fq_codel xt_tcpudp xt_multiport xt_state iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 ip_tables x_tables binfmt_misc joydev mousedev btusb btrtl btintel btbcm bluetooth ecdh_generic ecc iTCO_wdt i2c_dev iwl4965 iwlegacy coretemp snd_hda_codec_analog pcspkr psmouse mac80211 snd_hda_codec_generic libarc4 sdhci_pci cqhci sha256_generic sdhci libsha256 firewire_ohci snd_hda_intel snd_intel_dspcfg mmc_core snd_hda_codec snd_hwdep firewire_core led_class iosf_mbi snd_hda_core uhci_hcd lpc_ich crc_itu_t cfg80211 ehci_pci ehci_hcd snd_pcm usbcore mfd_core rfkill snd_timer snd usb_common soundcore video parport_pc parport intel_agp wmi intel_gtt backlight e1000e agpgart evdev [ 16.133014] CPU: 0 UID: 0 PID: 181 Comm: kworker/u8:6 Tainted: G W 6.11.0-cl+ #143 [ 16.133018] Tainted: [W]=WARN [ 16.133019] Hardware name: Hewlett-Packard HP Compaq 6910p/30BE, BIOS 68MCU Ver. F.19 07/06/2010 [ 16.133021] Workqueue: async async_run_entry_fn [ 16.133025] RIP: 0010:drv_stop+0xe7/0xf0 [mac80211] [ 16.133048] Code: 48 85 c0 74 0e 48 8b 78 08 89 ea 48 89 de e8 e0 87 04 00 65 ff 0d d1 de c4 5f 0f 85 42 ff ff ff e8 be 52 c2 e0 e9 38 ff ff ff <0f> 0b 5b 5d c3 0f 1f 40 00 41 54 49 89 fc 55 53 48 89 f3 2e 2e 2e [ 16.133050] RSP: 0018:ffffc9000029fc50 EFLAGS: 00010246 [ 16.133053] RAX: 0000000000000000 RBX: ffff8880072008e0 RCX: ffff88800377f6c0 [ 16.133054] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8880072008e0 [ 16.133056] RBP: 0000000000000000 R08: ffffffff81f238d8 R09: 0000000000000000 [ 16.133058] R10: ffff8880080520f0 R11: 0000000000000000 R12: ffff888008051c60 [ 16.133060] R13: ffff8880072008e0 R14: 0000000000000000 R15: ffff8880072011d8 [ 16.133061] FS: 0000000000000000(0000) GS:ffff88807c200000(0000) knlGS:0000000000000000 [ 16.133063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 16.133065] CR2: 000055dd43786c08 CR3: 000000000978f000 CR4: 00000000000006f0 [ 16.133067] Call Trace: [ 16.133069] [ 16.133070] ? __warn+0x77/0x120 [ 16.133075] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133098] ? report_bug+0x15c/0x190 [ 16.133100] ? handle_bug+0x36/0x70 [ 16.133103] ? exc_invalid_op+0x13/0x60 [ 16.133105] ? asm_exc_invalid_op+0x16/0x20 [ 16.133109] ? drv_stop+0xe7/0xf0 [mac80211] [ 16.133132] ieee80211_do_stop+0x55a/0x810 [mac80211] [ 16.133161] ? fq_codel_reset+0xa5/0xc0 [sch_fq_codel] [ 16.133164] ieee80211_stop+0x4f/0x180 [mac80211] [ 16.133192] __dev_close_many+0xa2/0x120 [ 16.133195] dev_close_many+0x90/0x150 [ 16.133198] dev_close+0x5d/0x80 [ 16.133200] cfg80211_shutdown_all_interfaces+0x40/0xe0 [cfg80211] [ 16.133223] wiphy_resume+0xb2/0x1a0 [cfg80211] [ 16.133247] ? wiphy_suspend+0x2a0/0x2a0 [cfg80211] [ 16.133269] dpm_run_callback+0x75/0x1b0 [ 16.133273] device_resume+0x97/0x200 [ 16.133277] async_resume+0x14/0x20 [ 16.133280] async_run_entry_fn+0x1b/0xa0 [ 16.133283] process_one_work+0x13d/0x350 [ 16.133287] worker_thread+0x2be/0x3d0 [ 16.133290] ? cancel_delayed_work_sync+0x70/0x70 [ 16.133294] kthread+0xc0/0xf0 [ 16.133296] ? kthread_park+0x80/0x80 [ 16.133299] ret_from_fork+0x28/0x40 [ 16.133302] ? kthread_park+0x80/0x80 [ 16.133304] ret_from_fork_asm+0x11/0x20 [ 16.133307] [ 16.133308] ---[ end trace 0000000000000000 ]--- [ 16.133335] ieee80211 phy0: PM: dpm_run_callback(): wiphy_resume [cfg80211] returns -110 [ 16.133360] ieee80211 phy0: PM: failed to restore async: error -110 Cc: stable@vger.kernel.org Cc: Stanislaw Gruszka Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Signed-off-by: Ville Syrjälä Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://patch.msgid.link/20241001200745.8276-1-ville.syrjala@linux.intel.com Signed-off-by: Greg Kroah-Hartman

wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()

2024-11-08T15:26:41+00:00

[ Upstream commit 07a6e3b78a65f4b2796a8d0d4adb1a15a81edead ] 1. The size of the response packet is not validated. 2. The response buffer is not freed. Resolve these issues by switching to iwl_mvm_send_cmd_status(), which handles both size validation and frees the buffer. Fixes: f130bb75d881 ("iwlwifi: add FW recovery flow") Signed-off-by: Daniel Gabay Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: disconnect station vifs if recovery failed

2024-11-08T15:26:41+00:00

[ Upstream commit e50a88e5cb8792cc416866496288c5f4d1eb4b1f ] This will allow to reconnect immediately instead of leaving the connection in a limbo state. Signed-off-by: Emmanuel Grumbach Reviewed-by: Gregory Greenman Signed-off-by: Miri Korenblit Link: https://msgid.link/20240128084842.e90531cd3a36.Iebdc9483983c0d8497f9dcf9d79ec37332a5fdcc@changeid Signed-off-by: Johannes Berg Stable-dep-of: 07a6e3b78a65 ("wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()") Signed-off-by: Sasha Levin

wifi: iwlegacy: Fix "field-spanning write" warning in il_enqueue_hcmd()

2024-11-08T15:26:40+00:00

[ Upstream commit d4cdc46ca16a5c78b36c5b9b6ad8cac09d6130a0 ] iwlegacy uses command buffers with a payload size of 320 bytes (default) or 4092 bytes (huge). The struct il_device_cmd type describes the default buffers and there is no separate type describing the huge buffers. The il_enqueue_hcmd() function works with both default and huge buffers, and has a memcpy() to the buffer payload. The size of this copy may exceed 320 bytes when using a huge buffer, which now results in a run-time warning: memcpy: detected field-spanning write (size 1014) of single field "&out_cmd->cmd.payload" at drivers/net/wireless/intel/iwlegacy/common.c:3170 (size 320) To fix this: - Define a new struct type for huge buffers, with a correctly sized payload field - When using a huge buffer in il_enqueue_hcmd(), cast the command buffer pointer to that type when looking up the payload field Reported-by: Martin-Éric Racine References: https://bugs.debian.org/1062421 References: https://bugzilla.kernel.org/show_bug.cgi?id=219124 Signed-off-by: Ben Hutchings Fixes: 54d9469bc515 ("fortify: Add run-time WARN for cross-field memcpy()") Tested-by: Martin-Éric Racine Tested-by: Brandon Nielsen Acked-by: Stanislaw Gruszka Signed-off-by: Kalle Valo Link: https://patch.msgid.link/ZuIhQRi/791vlUhE@decadent.org.uk Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: Fix a race in scan abort flow

2024-10-17T13:21:35+00:00

[ Upstream commit 87c1c28a9aa149489e1667f5754fc24f4973d2d0 ] When the upper layer requests to cancel an ongoing scan, a race is possible in which by the time the driver starts to handle the upper layers scan cancel flow, the FW already completed handling the scan request and the driver received the scan complete notification but still did not handle the notification. In such a case the FW will simply ignore the scan abort request coming from the driver, no notification would arrive from the FW and the entire abort flow would be considered a failure. To better handle this, check the status code returned by the FW for the scan abort command. In case the status indicates that no scan was aborted, complete the scan abort flow with success, i.e., the scan was aborted, as the flow is expected to consume the scan complete notification. Signed-off-by: Ilan Peer Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin

wifi: iwlwifi: mvm: increase the time between ranging measurements

2024-10-17T13:20:38+00:00

[ Upstream commit 3a7ee94559dfd640604d0265739e86dec73b64e8 ] The algo running in fw may take a little longer than 5 milliseconds, (e.g. measurement on 80MHz while associated). Increase the minimum time between measurements to 7 milliseconds. Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13") Signed-off-by: Avraham Stern Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin