kernel/linux.git/drivers/net/wireless/intel, branch v4.19.16

iwlwifi: add new cards for 9560, 9462, 9461 and killer series

2018-12-29T12:37:58+00:00

commit f108703cb5f199d0fc98517ac29a997c4c646c94 upstream. add few PCI ID'S for 9560, 9462, 9461 and killer series. Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares

2018-12-29T12:37:58+00:00

commit eca1e56ceedd9cc185eb18baf307d3ff2e4af376 upstream. Old firmware versions don't support this command. Sending it to any firmware before -41.ucode will crash the firmware. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975 Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE") CC: #4.19+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: don't use SAR Geo if basic SAR is not used

2018-12-01T08:37:26+00:00

commit 5d041c46ccb9b48acc110e214beff5e2789311df upstream. We can't use SAR Geo if basic SAR is not enabled, since the SAR Geo tables define offsets in relation to the basic SAR table in use. To fix this, make iwl_mvm_sar_init() return one in case WRDS is not available, so we can skip reading WGDS entirely. Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix regulatory domain update when the firmware starts

2018-12-01T08:37:26+00:00

commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream. When the firmware starts, it doesn't have any regulatory information, hence it uses the world wide limitations. The driver can feed the firmware with previous knowledge that was kept in the driver, but the firmware may still not update its internal tables. This happens when we start a BSS interface, and then the firmware can change the regulatory tables based on our location and it'll use more lenient, location specific rules. Then, if the firmware is shut down (when the interface is brought down), and then an AP interface is created, the firmware will forget the country specific rules. The host will think that we are in a certain country that may allow channels and will try to teach the firmware about our location, but the firmware may still not allow to drop the world wide limitations and apply country specific rules because it was just re-started. In this case, the firmware will reply with MCC_RESP_ILLEGAL to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let the upper layers (cfg80211 / hostapd) know that the channel list they know about has been updated. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: support sta_statistics() even on older firmware

2018-12-01T08:37:26+00:00

commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream. The oldest firmware supported by iwlmvm do support getting the average beacon RSSI. Enable the sta_statistics() call from mac80211 even on older firmware versions. Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client") Cc: stable@vger.kernel.org # 4.2+ Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE

2018-12-01T08:37:26+00:00

commit 66e839030fd698586734e017fd55c4f2a89dba0b upstream. From coreboot/BIOS: Name ("WGDS", Package() { Revision, Package() { DomainType, // 0x7:WiFi ==> We miss this one. WgdsWiFiSarDeltaGroup1PowerMax1, // Group 1 FCC 2400 Max WgdsWiFiSarDeltaGroup1PowerChainA1, // Group 1 FCC 2400 A Offset WgdsWiFiSarDeltaGroup1PowerChainB1, // Group 1 FCC 2400 B Offset WgdsWiFiSarDeltaGroup1PowerMax2, // Group 1 FCC 5200 Max WgdsWiFiSarDeltaGroup1PowerChainA2, // Group 1 FCC 5200 A Offset WgdsWiFiSarDeltaGroup1PowerChainB2, // Group 1 FCC 5200 B Offset WgdsWiFiSarDeltaGroup2PowerMax1, // Group 2 EC Jap 2400 Max WgdsWiFiSarDeltaGroup2PowerChainA1, // Group 2 EC Jap 2400 A Offset WgdsWiFiSarDeltaGroup2PowerChainB1, // Group 2 EC Jap 2400 B Offset WgdsWiFiSarDeltaGroup2PowerMax2, // Group 2 EC Jap 5200 Max WgdsWiFiSarDeltaGroup2PowerChainA2, // Group 2 EC Jap 5200 A Offset WgdsWiFiSarDeltaGroup2PowerChainB2, // Group 2 EC Jap 5200 B Offset WgdsWiFiSarDeltaGroup3PowerMax1, // Group 3 ROW 2400 Max WgdsWiFiSarDeltaGroup3PowerChainA1, // Group 3 ROW 2400 A Offset WgdsWiFiSarDeltaGroup3PowerChainB1, // Group 3 ROW 2400 B Offset WgdsWiFiSarDeltaGroup3PowerMax2, // Group 3 ROW 5200 Max WgdsWiFiSarDeltaGroup3PowerChainA2, // Group 3 ROW 5200 A Offset WgdsWiFiSarDeltaGroup3PowerChainB2, // Group 3 ROW 5200 B Offset } }) When read the ACPI data to find out the WGDS, the DATA_SIZE is never matched. From the above format, it gives 19 numbers, but our driver is hardcode as 18. Fix it to pass then can parse the data into our wgds table. Then we will see: iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init Sending GEO_TX_POWER_LIMIT iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[0]: chain A = 68 chain B = 69 max_tx_power = 54 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[0] Band[1]: chain A = 48 chain B = 49 max_tx_power = 70 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[0]: chain A = 51 chain B = 67 max_tx_power = 50 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[1] Band[1]: chain A = 69 chain B = 70 max_tx_power = 68 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[0]: chain A = 49 chain B = 50 max_tx_power = 48 iwlwifi 0000:01:00.0: U iwl_mvm_sar_geo_init SAR geographic profile[2] Band[1]: chain A = 52 chain B = 53 max_tx_power = 51 Cc: stable@vger.kernel.org # 4.12+ Fixes: a6bff3cb19b7 ("iwlwifi: mvm: add GEO_TX_POWER_LIMIT cmd for geographic tx power table") Signed-off-by: Matt Chen Signed-off-by: Luca Coelho Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: check return value of rs_rate_from_ucode_rate()

2018-11-13T19:08:41+00:00

commit 3d71c3f1f50cf309bd20659422af549bc784bfff upstream. The rs_rate_from_ucode_rate() function may return -EINVAL if the rate is invalid, but none of the callsites check for the error, potentially making us access arrays with index IWL_RATE_INVALID, which is larger than the arrays, causing an out-of-bounds access. This will trigger KASAN warnings, such as the one reported in the bugzilla issue mentioned below. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=200659 Cc: stable@vger.kernel.org Signed-off-by: Luca Coelho Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: fix BAR seq ctrl reporting

2018-11-13T19:08:30+00:00

[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ] There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: check for n_profiles validity in EWRD ACPI

2018-11-13T19:08:23+00:00

[ Upstream commit 2e1976bb75263fbad918e82184b16a23bd721546 ] When reading the profiles from the EWRD table in ACPI, we loop over the data and set it into our internal table. We use the number of profiles specified in ACPI without checking its validity, so if the ACPI table is corrupted and the number is larger than our array size, we will try to make an out-of-bounds access. Fix this by making sure the value specified in the ACPI table is valid. Fixes: 6996490501ed ("iwlwifi: mvm: add support for EWRD (Dynamic SAR) ACPI table") Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iwlwifi: mvm: clear HW_RESTART_REQUESTED when stopping the interface

2018-11-13T19:08:23+00:00

[ Upstream commit 155f7e0441cd121b1e673d465a35e99f4b9b2f0b ] Fix a bug that happens in the following scenario: 1) suspend without WoWLAN 2) mac80211 calls drv_stop because of the suspend 3) __iwl_mvm_mac_stop deallocates the aux station 4) during drv_stop the firmware crashes 5) iwlmvm: * sets IWL_MVM_STATUS_HW_RESTART_REQUESTED * asks mac80211 to kick the restart flow 6) mac80211 puts the restart worker into a freezable queue which means that the worker will not run for now since the workqueue is already frozen 7) ... 8) resume 9) mac80211 runs ieee80211_reconfig as part of the resume 10) mac80211 detects that a restart flow has been requested and that we are now resuming from suspend and cancels the restart worker 11) mac80211 calls drv_start() 12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls iwl_mvm_restart_cleanup() 13) iwl_fw_error_dump gets called and accesses the device to get debug data 14) iwl_mvm_up adds the aux station 15) iwl_mvm_add_aux_sta() allocates an internal station for the aux station 16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART and doesn't really allocate a station ID for the aux station 17) a new queue is added for the aux station Note that steps from 5 to 9 aren't really part of the problem but were described for the sake of completeness. Once the iwl_mvm_mac_stop() is called, the device is not accessible, meaning that step 12) can't succeed and we'll see the following: drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]() Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8) Call Trace: [] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi] [] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi] [] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi] [] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm] [] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm] [] drv_start+0xa1/0xc5 [iwl7000_mac80211] [] ieee80211_reconfig+0x145/0xf50 [mac80211] [] ieee80211_resume+0x62/0x66 [mac80211] [] wiphy_resume+0xa9/0xc6 [cfg80211] The station id of the aux station is set to 0xff in step 3 and because we don't really allocate a new station id for the auxliary station (as explained in 16), we end up sending a command to the firmware asking to connect the queue to station id 0xff. This makes the firmware crash with the following information: 0x00002093 | ADVANCED_SYSASSERT 0x000002F0 | trm_hw_status0 0x00000000 | trm_hw_status1 0x00000B38 | branchlink2 0x0001978C | interruptlink1 0x00000000 | interruptlink2 0xFF080501 | data1 0xDEADBEEF | data2 0xDEADBEEF | data3 Firmware error during reconfiguration - reprobe! FW error in SYNC CMD SCD_QUEUE_CFG Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED in iwl_mvm_mac_stop(). We won't be able to collect debug data anyway and when we will brought up again, we will have a clean state from the firmware perspective. Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in step 12) we won't get to the 2093 ASSERT either. Fixes: bf8b286f86fc ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART") Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman