kernel/linux.git/drivers/net/wireless/cisco, branch v5.10.257

wifi: airo: avoid uninitialized warning in airo_get_rate()

2023-07-27T06:44:24+00:00

[ Upstream commit 9373771aaed17f5c2c38485f785568abe3a9f8c1 ] Quieten a gcc (11.3.0) build error or warning by checking the function call status and returning -EBUSY if the function call failed. This is similar to what several other wireless drivers do for the SIOCGIWRATE ioctl call when there is a locking problem. drivers/net/wireless/cisco/airo.c: error: 'status_rid.currentXmitRate' is used uninitialized [-Werror=uninitialized] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap Reported-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/39abf2c7-24a-f167-91da-ed4c5435d1c4@linux-m68k.org Link: https://lore.kernel.org/r/20230709133154.26206-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

wifi: airo: do not assign -1 to unsigned char

2022-12-02T16:39:57+00:00

[ Upstream commit e6cb8769452e8236b52134e5cb4a18b8f5986932 ] With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, we get a warning when assigning the unchecked output of hex_to_bin() to that unsigned char. Mark `key` as a `u8`, which matches the struct's type, and then check each call to hex_to_bin() before casting. Cc: Kalle Valo Cc: linux-wireless@vger.kernel.org Signed-off-by: Jason A. Donenfeld Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221024162843.535921-1-Jason@zx2c4.com Signed-off-by: Sasha Levin

airo: work around stack usage warning

2021-05-22T09:40:51+00:00

commit 7909a590eba6d021f104958857cbc4f0089daceb upstream. gcc-11 with KASAN on 32-bit arm produces a warning about a function that needs a lot of stack space: drivers/net/wireless/cisco/airo.c: In function 'setup_card.constprop': drivers/net/wireless/cisco/airo.c:3960:1: error: the frame size of 1512 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] Most of this is from a single large structure that could be dynamically allocated or moved into the per-device structure. However, as the callers all seem to have a fairly well bounded call chain, the easiest change is to pull out the part of the function that needs the large variables into a separate function and mark that as noinline_for_stack. This does not reduce the total stack usage, but it gets rid of the warning and requires minimal changes otherwise. Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210323131634.2669455-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman

airo: switch from 'pci_' to 'dma_' API

2020-09-16T05:56:43+00:00

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'mpi_map_card()' GFP_KERNEL can be used because this function is called from a probe or a module_init() function and no spinlock is taken in the between. The call chains are: airo_init_module module_init function in 'airo.c' or airo_probe .probe function in 'airo_cs.c' --> airo_config followed in both cases by: --> init_airo_card --> _init_airo_card --> mpi_map_card @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200907201942.321568-1-christophe.jaillet@wanadoo.fr

airo: Fix a myriad of coding style issues

2020-08-27T12:15:26+00:00

- Ensure spaces appear after {for, if, while, etc} - Ensure spaces to not appear after '(' - Ensure spaces to not appear before ')' - Ensure spaces appear between ')' and '{' - Ensure spaces appear after ',' - Ensure spaces do not appear before ',' - Ensure spaces appear either side of '=' - Ensure '{'s which open functions are on a new line - Remove trailing whitespace There are still a whole host of issues with this file, but this patch certainly breaks the back of them. Cc: Kalle Valo Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Benjamin Reed Cc: Javier Achirica Cc: Jean Tourrilhes Cc: Fabrice Bellet Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200814113933.1903438-13-lee.jones@linaro.org

airo: Place brackets around empty statement

2020-08-27T12:15:24+00:00

Fixes the following W=1 kernel build warning(s): drivers/net/wireless/cisco/airo.c: In function ‘airo_init_module’: drivers/net/wireless/cisco/airo.c:5663:21: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Cc: Kalle Valo Cc: "David S. Miller" Cc: Jakub Kicinski Cc: Benjamin Reed Cc: Javier Achirica Cc: Jean Tourrilhes Cc: Fabrice Bellet Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200814113933.1903438-12-lee.jones@linaro.org

airo: use generic power management

2020-08-02T15:24:37+00:00

Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200728114128.1218310-1-vaibhavgupta40@gmail.com

wireless: Fix trivial spelling

2020-07-15T16:48:14+00:00

The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200715124839.252822-5-kieran.bingham+renesas@ideasonboard.com

airo: use set_current_state macro

2020-07-15T10:40:21+00:00

Use set_current_state macro instead of current->state = TASK_RUNNING. Signed-off-by: Xu Wang Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200702015701.8606-1-vulab@iscas.ac.cn

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada