kernel/linux.git/drivers/net/wireless/broadcom/brcm80211/include, branch linux-4.16.y

brcmfmac: Add support for CYW4373 SDIO/USB chipset

2017-08-08T11:51:12+00:00

Add support for CYW4373 SDIO/USB chipset. CYW4373 is a 1x1 dual-band 11ac chipset with 20/40/80Mhz channel support. It's a WiFi/BT combo device. Signed-off-by: Chi-Hsien Lin Reviewed-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: add support for 43341 chip

2016-11-29T15:29:25+00:00

This chip was already supported, but seems a device came up giving a different chip identifier. So adding that effectively mapping to the same firmware file as for 43340 chip. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: Add USB ID for Cisco Linksys AE1200

2016-09-03T17:01:03+00:00

The AE1200 comes with different revisions of the BCM43235 chipset, but all have the same USB ID. Only revision 3 can be supported. Signed-off-by: Ismael Luceno Signed-off-by: Kalle Valo

brcmfmac: add support for the PCIE devices 43525 and 43465

2016-06-16T15:20:05+00:00

This patch adds support for the new PCIE devices 43525 and 43465. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmutil: add field storing control channel to the struct brcmu_chan

2016-06-14T14:27:42+00:00

Our d11 code supports encoding/decoding channel info into/from chanspec format used by firmware. Current implementation is quite misleading because of the way "chnum" field is used. When encoding channel info, "chnum" has to be filled by a caller with *center* channel number. However when decoding chanspec the same field is filled with a *control* channel number. 1) This can be confusing. It's expected for information to be the same after encoding and decoding. 2) It doesn't allow accessing all info when decoding. Some functions may need to know both channel numbers, e.g. cfg80211 callback getting current channel. Solve this by adding a separated field for control channel. Signed-off-by: Rafał Miłecki Reviewed-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: add 802.11w management frame protection support

2016-03-07T12:15:59+00:00

Add full support for both AP and STA for management frame protection. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: add 43242 device id for LG dongle

2015-12-11T11:52:05+00:00

Got a hint on IRC that a 43242 dongle for LG smart TV's works with brcmfmac: > Hello - I recently got a LG AN-WF500 wireless dongle for LG's SmartTVs. > From the information I gathered it uses a Broadcom chipset BCM43242. > The device should have been supported by brcmfmac kernel driver if it used > USB IDs 0a5c:bd1f. > My device however identifies itself as "ID 043e:3101 LG Electronics USA, Inc.". > I then tried adding the USB ID to the driver with > "echo "043e 3101" > /sys/bus/usb/drivers/brcmfmac/new_id" and it just works. > The kernel provides the following information. > [15958.851291] usb 3-1.1.3: new high-speed USB device number 53 using ehci-pci > [15958.946723] usb 3-1.1.3: New USB device found, idVendor=043e, idProduct=3101 > [15958.946728] usb 3-1.1.3: New USB device strings: Mfr=1, Product=4, SerialNumber=3 > [15958.946731] usb 3-1.1.3: Product: Composite Wireless Adapter > [15958.946733] usb 3-1.1.3: Manufacturer: Broadcom > [15958.946735] usb 3-1.1.3: SerialNumber: 28458 Reported-by: Johannes Berg Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: Cleanup pmksa cache handling code

2015-12-11T11:51:23+00:00

Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcmfmac: Add support for the BCM4359 11ac RSDB PCIE device.

2015-11-26T11:52:56+00:00

Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

brcm80211: move under broadcom vendor directory

2015-11-18T09:24:22+00:00

Part of reorganising wireless drivers directory and Kconfig. Note that I had to edit Makefiles from subdirectories to use the new location. Signed-off-by: Kalle Valo