kernel/linux.git/drivers/net/wireless/ath, branch v6.6.134

wifi: ath11k: Pass the correct value of each TID during a stop AMPDU session

2026-04-11T12:19:18+00:00

[ Upstream commit e225b36f83d7926c1f2035923bb0359d851fdb73 ] During ongoing traffic, a request to stop an AMPDU session for one TID could incorrectly affect other active sessions. This can happen because an incorrect TID reference would be passed when updating the BA session state, causing the wrong session to be stopped. As a result, the affected session would be reduced to a minimal BA size, leading to a noticeable throughput degradation. Fix this issue by passing the correct argument from ath11k_dp_rx_ampdu_stop() to ath11k_peer_rx_tid_reo_update() during a stop AMPDU session. Instead of passing peer->tx_tid, which is the base address of the array, corresponding to TID 0; pass the value of &peer->rx_tid[params->tid], where the different TID numbers are accounted for. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.9.0.1-02146-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f2895 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Reshma Immaculate Rajkumar Reviewed-by: Baochen Qiang Reviewed-by: Vasanthakumar Thiagarajan Link: https://patch.msgid.link/20260319065608.2408179-1-reshma.rajkumar@oss.qualcomm.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: Use dma_alloc_noncoherent for rx_tid buffer allocation

2026-04-11T12:19:18+00:00

[ Upstream commit eeadc6baf8b3dcd32787cc84f0473dc2a2850370 ] Currently, the driver allocates cacheable DMA buffers for the rx_tid structure using kzalloc() and dma_map_single(). These buffers are long-lived and can persist for the lifetime of the peer, which is not advisable. Instead of using kzalloc() and dma_map_single() for allocating cacheable DMA buffers, utilize the dma_alloc_noncoherent() helper for the allocation of long-lived cacheable DMA buffers, such as the peer's rx_tid. Since dma_alloc_noncoherent() returns unaligned physical and virtual addresses, align them internally before use within the driver. This ensures proper allocation of non-coherent memory through the kernel helper. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: P Praneesh Tested-by: Tim Harvey Link: https://patch.msgid.link/20250119164219.647059-3-quic_ppranees@quicinc.com Signed-off-by: Jeff Johnson Stable-dep-of: e225b36f83d7 ("wifi: ath11k: Pass the correct value of each TID during a stop AMPDU session") Signed-off-by: Sasha Levin

wifi: ath11k: skip status ring entry processing

2026-04-11T12:19:18+00:00

[ Upstream commit 4c2b796be3a12a11ab611917fafdabc9d3862a1d ] If STATUS_BUFFER_DONE is not set for a monitor status ring entry, we don't process the status ring until STATUS_BUFFER_DONE set for that status ring entry. During LMAC reset it may happen that hardware will not write STATUS_BUFFER_DONE tlv in status buffer, in that case we end up waiting for STATUS_BUFFER_DONE leading to backpressure on monitor status ring. To fix the issue, when HP (Head Pointer) + 1 entry is peeked and if DMA is not done and if HP + 2 entry's DMA done is set, replenish HP + 1 entry and start processing in next interrupt. If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA done to be set. Also, during monitor attach HP points to the end of the ring and TP (Tail Pointer) points to the start of the ring. Using ath11k_hal_srng_src_peek() may result in processing invalid buffer for the very first interrupt. Since, HW starts writing buffer from TP. To avoid this issue call ath11k_hal_srng_src_next_peek() instead of calling ath11k_hal_srng_src_peek(). Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1 Signed-off-by: Venkateswara Naralasetty Co-developed-by: Tamizh Chelvam Raja Signed-off-by: Tamizh Chelvam Raja Signed-off-by: Kalle Valo Link: https://msgid.link/20240429073624.736147-1-quic_tamizhr@quicinc.com Stable-dep-of: e225b36f83d7 ("wifi: ath11k: Pass the correct value of each TID during a stop AMPDU session") Signed-off-by: Sasha Levin

wifi: ath10k: fix lock protection in ath10k_wmi_event_peer_sta_ps_state_chg()

2026-03-04T12:20:49+00:00

[ Upstream commit 820ba7dd6859ef8b1eaf6014897e7aa4756fc65d ] ath10k_wmi_event_peer_sta_ps_state_chg() uses lockdep_assert_held() to assert that ar->data_lock should be held by the caller, but neither ath10k_wmi_10_2_op_rx() nor ath10k_wmi_10_4_op_rx() acquire this lock before calling this function. The field arsta->peer_ps_state is documented as protected by ar->data_lock in core.h, and other accessors (ath10k_peer_ps_state_disable, ath10k_dbg_sta_read_peer_ps_state) properly acquire this lock. Add spin_lock_bh()/spin_unlock_bh() around the peer_ps_state update, and remove the lockdep_assert_held() to be aligned with new locking, following the pattern used by other WMI event handlers in the driver. Signed-off-by: Ziyi Guo Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260123175611.767731-1-n7l8m4@u.northwestern.edu [removed excess blank line] Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath12k: fix preferred hardware mode calculation

2026-03-04T12:20:45+00:00

[ Upstream commit 7f852de0003219c431a6f2ffd951fd82a4673660 ] For single pdev device like WCN7850/QCC2072, preferred_hw_mode is initialized to WMI_HOST_HW_MODE_SINGLE. Later when firmware sends supported modes to host, each mode is compared with the initial one and if the priority of the new mode is higher, update the parameter and store mode capability. For WCN7850, this does not result in issue, as one of the supported mode indeed has a higher priority. However the only available mode of QCC2072 at this stage is WMI_HOST_HW_MODE_SINGLE, which fails the comparison, hence mode capability is not stored. Subsequently driver initialization fails. Fix it by accepting a mode with the same priority. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Signed-off-by: Baochen Qiang Reviewed-by: Vasanthakumar Thiagarajan Link: https://patch.msgid.link/20260112-ath12k-support-qcc2072-v2-4-fc8ce1e43969@oss.qualcomm.com Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: add pm quirk for Thinkpad Z13/Z16 Gen1

2026-03-04T12:20:45+00:00

[ Upstream commit 4015b1972763d7d513172276e51439f37e622a92 ] Z16 Gen1 has the wakeup-from-suspend issues from [1] but was never added to the appropriate quirk list. I've tested this patch on top of 6.18.2, it fixes the issue for me on 21D4 Mark Pearson provided the other product IDs covering the second Z16 Gen1 and both Z13 Gen1 identifiers. They share the same firmware, and folks in the bugzilla report do indeed see the problem on Z13. [1] - https://bugzilla.kernel.org/show_bug.cgi?id=219196 Signed-off-by: Ross Vandegrift Reviewed-by: Baochen Qiang Tested-by: Mark Pearson Reviewed-by: Mark Pearson Link: https://patch.msgid.link/wj7o2kmb7g54stdjvxp2hjqrnutnq3jbf4s2uh4ctvmlxdq7tf@nbkj2ebakhrd Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath10k: sdio: add missing lock protection in ath10k_sdio_fw_crashed_dump()

2026-03-04T12:19:47+00:00

[ Upstream commit e55ac348089e579fc224569c7bd90340bf2439f9 ] ath10k_sdio_fw_crashed_dump() calls ath10k_coredump_new() which requires ar->dump_mutex to be held, as indicated by lockdep_assert_held() in that function. However, the SDIO implementation does not acquire this lock, unlike the PCI and SNOC implementations which properly hold the mutex. Additionally, ar->stats.fw_crash_counter is documented as protected by ar->data_lock in core.h, but the SDIO implementation modifies it without holding this spinlock. Add the missing mutex_lock()/mutex_unlock() around the coredump operations, and add spin_lock_bh()/spin_unlock_bh() around the fw_crash_counter increment, following the pattern used in ath10k_pci_fw_dump_work() and ath10k_snoc_fw_crashed_dump(). Fixes: 3c45f21af84e ("ath10k: sdio: add firmware coredump support") Signed-off-by: Ziyi Guo Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260123045822.2221549-1-n7l8m4@u.northwestern.edu Signed-off-by: Jeff Johnson Signed-off-by: Sasha Levin

wifi: ath11k: add srng->lock for ath11k_hal_srng_* in monitor mode

2026-02-06T15:48:27+00:00

[ Upstream commit 63b7af49496d0e32f7a748b6af3361ec138b1bd3 ] ath11k_hal_srng_* should be used with srng->lock to protect srng data. For ath11k_dp_rx_mon_dest_process() and ath11k_dp_full_mon_process_rx(), they use ath11k_hal_srng_* for many times but never call srng->lock. So when running (full) monitor mode, warning will occur: RIP: 0010:ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] Call Trace: ? ath11k_hal_srng_dst_peek+0x18/0x30 [ath11k] ath11k_dp_rx_process_mon_status+0xc45/0x1190 [ath11k] ? idr_alloc_u32+0x97/0xd0 ath11k_dp_rx_process_mon_rings+0x32a/0x550 [ath11k] ath11k_dp_service_srng+0x289/0x5a0 [ath11k] ath11k_pcic_ext_grp_napi_poll+0x30/0xd0 [ath11k] __napi_poll+0x30/0x1f0 net_rx_action+0x198/0x320 __do_softirq+0xdd/0x319 So add srng->lock for them to avoid such warnings. Inorder to fetch the srng->lock, should change srng's definition from 'void' to 'struct hal_srng'. And initialize them elsewhere to prevent one line of code from being too long. This is consistent with other ring process functions, such as ath11k_dp_process_rx(). Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Kang Yang Acked-by: Jeff Johnson Link: https://patch.msgid.link/20241219110531.2096-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman

wifi: ath11k: fix RCU stall while reaping monitor destination ring

2026-01-30T09:27:43+00:00

[ Upstream commit 16c6c35c03ea73054a1f6d3302a4ce4a331b427d ] While processing the monitor destination ring, MSDUs are reaped from the link descriptor based on the corresponding buf_id. However, sometimes the driver cannot obtain a valid buffer corresponding to the buf_id received from the hardware. This causes an infinite loop in the destination processing, resulting in a kernel crash. kernel log: ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309 ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed Fix this by skipping the problematic buf_id and reaping the next entry, replacing the break with the next MSDU processing. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: P Praneesh Signed-off-by: Kang Yang Acked-by: Kalle Valo Acked-by: Jeff Johnson Link: https://patch.msgid.link/20241219110531.2096-2-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson Signed-off-by: Li hongliang <1468888505@139.com> Signed-off-by: Greg Kroah-Hartman

wifi: ath12k: fix dma_free_coherent() pointer

2026-01-30T09:27:39+00:00

commit bb97131fbf9b708dd9616ac2bdc793ad102b5c48 upstream. dma_alloc_coherent() allocates a DMA mapped buffer and stores the addresses in XXX_unaligned fields. Those should be reused when freeing the buffer rather than the aligned addresses. Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260106084905.18622-2-fourier.thomas@gmail.com Signed-off-by: Jeff Johnson Signed-off-by: Greg Kroah-Hartman