kernel/linux.git/drivers/net/wireless/ath, branch v5.6.17

ath9k: Handle txpower changes even when TPC is disabled

2020-04-17T14:13:31+00:00

commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream. When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by: Remi Pommarel Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2020-01-29T00:02:33+00:00

Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-01-28T17:44:15+00:00

Pull perf updates from Ingo Molnar: "Kernel side changes: - Ftrace is one of the last W^X violators (after this only KLP is left). These patches move it over to the generic text_poke() interface and thereby get rid of this oddity. This requires a surprising amount of surgery, by Peter Zijlstra. - x86/AMD PMUs: add support for 'Large Increment per Cycle Events' to count certain types of events that have a special, quirky hw ABI (by Kim Phillips) - kprobes fixes by Masami Hiramatsu Lots of tooling updates as well, the following subcommands were updated: annotate/report/top, c2c, clang, record, report/top TUI, sched timehist, tests; plus updates were done to the gtk ui, libperf, headers and the parser" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) perf/x86/amd: Add support for Large Increment per Cycle Events perf/x86/amd: Constrain Large Increment per Cycle events perf/x86/intel/rapl: Add Comet Lake support tracing: Initialize ret in syscall_enter_define_fields() perf header: Use last modification time for timestamp perf c2c: Fix return type for histogram sorting comparision functions perf beauty sockaddr: Fix augmented syscall format warning perf/ui/gtk: Fix gtk2 build perf ui gtk: Add missing zalloc object perf tools: Use %define api.pure full instead of %pure-parser libperf: Setup initial evlist::all_cpus value perf report: Fix no libunwind compiled warning break s390 issue perf tools: Support --prefix/--prefix-strip perf report: Clarify in help that --children is default tools build: Fix test-clang.cpp with Clang 8+ perf clang: Fix build with Clang 9 kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic tools lib: Fix builds when glibc contains strlcpy() perf report/top: Make 'e' visible in the help and make it toggle showing callchains perf report/top: Do not offer annotation for symbols without samples ...

wcn36xx: fix spelling mistake "to" -> "too"

2020-01-26T14:40:19+00:00

There is a spelling mistake in a wcn36xx_err message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo

ar5523: fix spelling mistake "to" -> "too"

2020-01-26T14:36:15+00:00

There is a spelling mistake in a ar5523_err message. Fix it. Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo

ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter

2020-01-26T14:35:14+00:00

Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g"). This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507. Signed-off-by: Mert Dirik Signed-off-by: Kalle Valo

ath10k: Use device_get_match_data() to simplify code

2020-01-26T14:30:20+00:00

Use device_get_match_data() here to simplify the code a bit. Signed-off-by: Stephen Boyd Signed-off-by: Kalle Valo

ath10k: Add newlines to printk messages

2020-01-26T14:29:25+00:00

Some printks in here don't have newlines at the end, meaning the log will be sort of hard to read. Add newlines. Signed-off-by: Stephen Boyd Signed-off-by: Kalle Valo

ath10k: Correct the DMA direction for management tx buffers

2020-01-26T14:28:20+00:00

The management packets, send to firmware via WMI, are mapped using the direction DMA_TO_DEVICE. Currently in case of wmi cleanup, these buffers are being unmapped using an incorrect DMA direction. This can cause unwanted behavior when the host driver is handling a restart of the wlan firmware. We might see a trace like below [] __dma_inv_area+0x28/0x58 [] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core] [] idr_for_each+0x78/0xe4 [] ath10k_wmi_detach+0x4c/0x7c [ath10k_core] [] ath10k_core_stop+0x58/0x68 [ath10k_core] [] ath10k_halt+0xec/0x13c [ath10k_core] [] ath10k_core_restart+0x11c/0x1a8 [ath10k_core] [] process_one_work+0x16c/0x31c Fix the incorrect DMA direction during the wmi management tx buffer cleanup. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event") Signed-off-by: Rakesh Pillai Signed-off-by: Kalle Valo

ath11k: fix up some error paths

2020-01-26T10:51:00+00:00

There are two error paths where "ret" wasn't set. Also one error path we set the error code to -EINVAL but we should just preserve the error code from ath11k_hal_srng_get_entrysize(). That function only returns -EINVAL so this doesn't change anything. I removed the "ret = 0;" initializers so that hopefully GCC will be able to detect these sorts of bugs in the future. Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Dan Carpenter Signed-off-by: Kalle Valo