kernel/linux.git/drivers/net/wireless/ath, branch v4.4.171

wil6210: missing length check in wmi_set_ie

2018-12-17T20:55:15+00:00

commit b5a8ffcae4103a9d823ea3aa3a761f65779fbe2a upstream. Add a length check in wmi_set_ie to detect unsigned integer overflow. Signed-off-by: Lior David Signed-off-by: Maya Erez Signed-off-by: Kalle Valo Signed-off-by: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

ath10k: fix kernel panic due to race in accessing arvif list

2018-12-01T08:46:36+00:00

commit ebaa4b1620bf69f2bc43cb45ea85fbafdaec23c3 upstream. arvifs list is traversed within data_lock spin_lock in tasklet context to fill channel information from the corresponding vif. This means any access to arvifs list for add/del operations should also be protected with the same spin_lock to avoid the race. Fix this by performing list add/del on arvfis within the data_lock. This could fix kernel panic something like the below. LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core] PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core] Internal error: Oops: 17 [#1] PREEMPT SMP ARM [] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core]) [] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core]) [] (tasklet_action+0x8c/0xec) [] (__do_softirq+0xdc/0x208) [] (irq_exit+0x84/0xe0) [] (__handle_domain_irq+0x80/0xa0) [] (gic_handle_irq+0x38/0x5c) [] (__irq_svc+0x40/0x74) (gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0) 0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769) 764 struct cfg80211_chan_def def; 765 766 lockdep_assert_held(&ar->data_lock); 767 768 list_for_each_entry(arvif, &ar->arvifs, list) { 769 if (arvif->vdev_id == vdev_id && 770 ath10k_mac_vif_chan(arvif->vif, &def) == 0) 771 return def.chan; 772 } 773 Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: Kalle Valo Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

ath10k: schedule hardware restart if WMI command times out

2018-11-21T08:27:32+00:00

[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ath10k: fix scan crash due to incorrect length calculation

2018-10-13T07:11:35+00:00

commit c8291988806407e02a01b4b15b4504eafbcc04e0 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by: Zhi Chen Signed-off-by: Kalle Valo Cc: Brian Norris Signed-off-by: Greg Kroah-Hartman

ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowait

2018-10-13T07:11:33+00:00

commit 9ef0f58ed7b4a55da4a64641d538e0d9e46579ac upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by: Carl Huang Tested-by: Brian Norris Reviewed-by: Brian Norris Signed-off-by: Kalle Valo Signed-off-by: Amit Pundir Signed-off-by: Greg Kroah-Hartman

ath10k: protect ath10k_htt_rx_ring_free with rx_ring.lock

2018-10-10T06:52:06+00:00

[ Upstream commit 168f75f11fe68455e0d058a818ebccfc329d8685 ] While debugging driver crashes related to a buggy firmware crashing under load, I noticed that ath10k_htt_rx_ring_free could be called without being under lock. I'm not sure if this is the root cause of the crash or not, but it seems prudent to protect it. Originally tested on 4.16+ kernel with ath10k-ct 10.4 firmware running on 9984 NIC. Signed-off-by: Ben Greear Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ath10k: disable bundle mgmt tx completion event support

2018-09-19T20:48:58+00:00

[ Upstream commit 673bc519c55843c68c3aecff71a4101e79d28d2b ] The tx completion of multiple mgmt frames can be bundled in a single event and sent by the firmware to host, if this capability is not disabled explicitly by the host. If the host cannot handle the bundled mgmt tx completion, this capability support needs to be disabled in the wmi init cmd, sent to the firmware. Add the host capability indication flag in the wmi ready command, to let firmware know the features supported by the host driver. This field is ignored if it is not supported by firmware. Set the host capability indication flag(i.e. host_capab) to zero, for disabling the support of bundle mgmt tx completion. This will indicate the firmware to send completion event for every mgmt tx completion, instead of bundling them together and sending in a single event. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Signed-off-by: Surabhi Vishnoi Signed-off-by: Rakesh Pillai Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ath10k: prevent active scans on potential unusable channels

2018-09-19T20:48:57+00:00

[ Upstream commit 3f259111583801013cb605bb4414aa529adccf1c ] The QCA4019 hw1.0 firmware 10.4-3.2.1-00050 and 10.4-3.5.3-00053 (and most likely all other) seem to ignore the WMI_CHAN_FLAG_DFS flag during the scan. This results in transmission (probe requests) on channels which are not "available" for transmissions. Since the firmware is closed source and nothing can be done from our side to fix the problem in it, the driver has to work around this problem. The WMI_CHAN_FLAG_PASSIVE seems to be interpreted by the firmware to not scan actively on a channel unless an AP was detected on it. Simple probe requests will then be transmitted by the STA on the channel. ath10k must therefore also use this flag when it queues a radar channel for scanning. This should reduce the chance of an active scan when the channel might be "unusable" for transmissions. Fixes: e8a50f8ba44b ("ath10k: introduce DFS implementation") Signed-off-by: Sven Eckelmann Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ath: Add regulatory mapping for Bahamas

2018-08-06T14:24:34+00:00

[ Upstream commit 699e2302c286a14afe7b7394151ce6c4e1790cc1 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by: Sven Eckelmann Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ath: Add regulatory mapping for Bermuda

2018-08-06T14:24:34+00:00

[ Upstream commit 9c790f2d234f65697e3b0948adbfdf36dbe63dd7 ] The country code is used by the ath to detect the ISO 3166-1 alpha-2 name and to select the correct conformance test limits (CTL) for a country. If the country isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this country are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by: Sven Eckelmann Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman