kernel/linux.git/drivers/net/wireless/ath, branch v4.19.112

ath10k: Correct the DMA direction for management tx buffers

2020-02-24T07:34:39+00:00

[ Upstream commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16 ] The management packets, send to firmware via WMI, are mapped using the direction DMA_TO_DEVICE. Currently in case of wmi cleanup, these buffers are being unmapped using an incorrect DMA direction. This can cause unwanted behavior when the host driver is handling a restart of the wlan firmware. We might see a trace like below [] __dma_inv_area+0x28/0x58 [] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core] [] idr_for_each+0x78/0xe4 [] ath10k_wmi_detach+0x4c/0x7c [ath10k_core] [] ath10k_core_stop+0x58/0x68 [ath10k_core] [] ath10k_halt+0xec/0x13c [ath10k_core] [] ath10k_core_restart+0x11c/0x1a8 [ath10k_core] [] process_one_work+0x16c/0x31c Fix the incorrect DMA direction during the wmi management tx buffer cleanup. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event") Signed-off-by: Rakesh Pillai Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: pci: Only dump ATH10K_MEM_REGION_TYPE_IOREG when safe

2020-02-14T21:33:23+00:00

commit d239380196c4e27a26fa4bea73d2bf994c14ec2d upstream. ath10k_pci_dump_memory_reg() will try to access memory of type ATH10K_MEM_REGION_TYPE_IOREG however, if a hardware restart is in progress this can crash a system. Individual ioread32() time has been observed to jump from 15-20 ticks to > 80k ticks followed by a secure-watchdog bite and a system reset. Work around this corner case by only issuing the read transaction when the driver state is ATH10K_STATE_ON. Tested-on: QCA9988 PCI 10.4-3.9.0.2-00044 Fixes: 219cc084c6706 ("ath10k: add memory dump support QCA9984") Signed-off-by: Bryan O'Donoghue Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath9k: fix storage endpoint lookup

2020-02-01T09:37:04+00:00

commit 0ef332951e856efa89507cdd13ba8f4fb8d4db12 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Cc: stable # 2.6.39 Signed-off-by: Johan Hovold Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

2020-01-27T13:51:13+00:00

[ Upstream commit b7139960832eb56fa15d390a4b5c8c5739bd0d1a ] When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len). Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet. The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data). Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00007-QCARMSWP-1. Fixes: 8530b4e7b22bc3b ("ath10k: sdio: set skb len for all rx packets") Signed-off-by: Nicolas Boichat Signed-off-by: Wen Gong Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

wcn36xx: use dynamic allocation for large variables

2020-01-27T13:51:10+00:00

[ Upstream commit 355cf31912014e6ff1bb1019ae4858cad12c68cf ] clang triggers a warning about oversized stack frames that gcc does not notice because of slightly different inlining decisions: ath/wcn36xx/smd.c:1409:5: error: stack frame size of 1040 bytes in function 'wcn36xx_smd_config_bss' [-Werror,-Wframe-larger-than=] ath/wcn36xx/smd.c:640:5: error: stack frame size of 1032 bytes in function 'wcn36xx_smd_start_hw_scan' [-Werror,-Wframe-larger-than=] Basically the wcn36xx_hal_start_scan_offload_req_msg, wcn36xx_hal_config_bss_req_msg_v1, and wcn36xx_hal_config_bss_req_msg structures are too large to be put on the kernel stack, but small enough that gcc does not warn about them. Use kzalloc() to allocate them all. There are similar structures in other parts of this driver, but they are all smaller, with the next largest stack frame at 480 bytes for wcn36xx_smd_send_beacon. Fixes: 8e84c2582169 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware") Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k: dynack: fix possible deadlock in ath_dynack_node_{de}init

2020-01-27T13:51:10+00:00

[ Upstream commit e1aa1a1db3b01c9890e82cf065cee99962ba1ed9 ] Fix following lockdep warning disabling bh in ath_dynack_node_init/ath_dynack_node_deinit [ 75.955878] -------------------------------- [ 75.955880] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 75.955884] swapper/0/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 75.955888] 00000000792a7ee0 (&(&da->qlock)->rlock){+.?.}, at: ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.955905] {SOFTIRQ-ON-W} state was registered at: [ 75.955912] lock_acquire+0x9a/0x160 [ 75.955917] _raw_spin_lock+0x2c/0x70 [ 75.955927] ath_dynack_node_init+0x2a/0x60 [ath9k_hw] [ 75.955934] ath9k_sta_state+0xec/0x160 [ath9k] [ 75.955976] drv_sta_state+0xb2/0x740 [mac80211] [ 75.956008] sta_info_insert_finish+0x21a/0x420 [mac80211] [ 75.956039] sta_info_insert_rcu+0x12b/0x2c0 [mac80211] [ 75.956069] sta_info_insert+0x7/0x70 [mac80211] [ 75.956093] ieee80211_prep_connection+0x42e/0x730 [mac80211] [ 75.956120] ieee80211_mgd_auth.cold+0xb9/0x15c [mac80211] [ 75.956152] cfg80211_mlme_auth+0x143/0x350 [cfg80211] [ 75.956169] nl80211_authenticate+0x25e/0x2b0 [cfg80211] [ 75.956172] genl_family_rcv_msg+0x198/0x400 [ 75.956174] genl_rcv_msg+0x42/0x90 [ 75.956176] netlink_rcv_skb+0x35/0xf0 [ 75.956178] genl_rcv+0x1f/0x30 [ 75.956180] netlink_unicast+0x154/0x200 [ 75.956182] netlink_sendmsg+0x1bf/0x3d0 [ 75.956186] ___sys_sendmsg+0x2c2/0x2f0 [ 75.956187] __sys_sendmsg+0x44/0x80 [ 75.956190] do_syscall_64+0x55/0x1a0 [ 75.956192] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 75.956194] irq event stamp: 2357092 [ 75.956196] hardirqs last enabled at (2357092): [] _raw_spin_unlock_irqrestore+0x3e/0x50 [ 75.956199] hardirqs last disabled at (2357091): [] _raw_spin_lock_irqsave+0x11/0x80 [ 75.956202] softirqs last enabled at (2357072): [] irq_enter+0x59/0x60 [ 75.956204] softirqs last disabled at (2357073): [] irq_exit+0xae/0xc0 [ 75.956206] other info that might help us debug this: [ 75.956207] Possible unsafe locking scenario: [ 75.956208] CPU0 [ 75.956209] ---- [ 75.956210] lock(&(&da->qlock)->rlock); [ 75.956213] [ 75.956214] lock(&(&da->qlock)->rlock); [ 75.956216] *** DEADLOCK *** [ 75.956217] 1 lock held by swapper/0/0: [ 75.956219] #0: 000000003bb5675c (&(&sc->sc_pcu_lock)->rlock){+.-.}, at: ath9k_tasklet+0x55/0x240 [ath9k] [ 75.956225] stack backtrace: [ 75.956228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc1-wdn+ #13 [ 75.956229] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009 [ 75.956231] Call Trace: [ 75.956233] [ 75.956236] dump_stack+0x67/0x90 [ 75.956239] mark_lock+0x4c1/0x640 [ 75.956242] ? check_usage_backwards+0x130/0x130 [ 75.956245] ? sched_clock_local+0x12/0x80 [ 75.956247] __lock_acquire+0x484/0x7a0 [ 75.956250] ? __lock_acquire+0x3b9/0x7a0 [ 75.956252] lock_acquire+0x9a/0x160 [ 75.956259] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956262] _raw_spin_lock_bh+0x34/0x80 [ 75.956268] ? ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956275] ath_dynack_sample_ack_ts+0x4d/0xa0 [ath9k_hw] [ 75.956280] ath_rx_tasklet+0xd09/0xe90 [ath9k] [ 75.956286] ath9k_tasklet+0x102/0x240 [ath9k] [ 75.956288] tasklet_action_common.isra.0+0x6d/0x170 [ 75.956291] __do_softirq+0xcc/0x425 [ 75.956294] irq_exit+0xae/0xc0 [ 75.956296] do_IRQ+0x8a/0x110 [ 75.956298] common_interrupt+0xf/0xf [ 75.956300] [ 75.956303] RIP: 0010:cpuidle_enter_state+0xb2/0x400 [ 75.956308] RSP: 0018:ffffffff82203e70 EFLAGS: 00000202 ORIG_RAX: ffffffffffffffd7 [ 75.956310] RAX: ffffffff82219800 RBX: ffffffff822bd0a0 RCX: 0000000000000000 [ 75.956312] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff82219800 [ 75.956314] RBP: ffff888155a01c00 R08: 00000011af51aabe R09: 0000000000000000 [ 75.956315] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 [ 75.956317] R13: 00000011af51aabe R14: 0000000000000003 R15: ffffffff82219800 [ 75.956321] cpuidle_enter+0x24/0x40 [ 75.956323] do_idle+0x1ac/0x220 [ 75.956326] cpu_startup_entry+0x14/0x20 [ 75.956329] start_kernel+0x482/0x489 [ 75.956332] secondary_startup_64+0xa4/0xb0 Fixes: c774d57fd47c ("ath9k: add dynamic ACK timeout estimation") Signed-off-by: Lorenzo Bianconi Tested-by: Koen Vandeputte Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: Fix encoding for protected management frames

2020-01-27T13:50:45+00:00

[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ] Currently the protected management frames are not appended with the MIC_LEN which results in the protected management frames being encoded incorrectly. Add the extra space at the end of the protected management frames to fix this encoding error for the protected management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi") Signed-off-by: Rakesh Pillai Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: Fix length of wmi tlv command for protected mgmt frames

2020-01-27T13:50:28+00:00

[ Upstream commit 761156ff573d1002983416e4fd1fe8d3489c4bd8 ] The length of wmi tlv command for management tx send is calculated incorrectly in case of protected management frames as there is addition of IEEE80211_CCMP_MIC_LEN twice. This leads to improper behaviour of firmware as the wmi tlv mgmt tx send command for protected mgmt frames is formed wrongly. Fix the length calculation of wmi tlv command for mgmt tx send in case of protected management frames by adding the IEEE80211_CCMP_MIC_LEN only once. Tested HW: WCN3990 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 Fixes: 1807da49733e "ath10k: wmi: add management tx by reference support over wmi" Signed-off-by: Surabhi Vishnoi Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: fix dma unmap direction for management frames

2020-01-27T13:50:20+00:00

[ Upstream commit 6e8a8991e2103dcb6a9cff28f460390e8e360848 ] The management frames transmitted are dma mapped with direction TO_DEVICE, but incorrectly mapped with direction FROM_DEVICE during tx complete and error cases. Fix the direction of dma during dma unmap of the transmitted management frames. Tested HW: WCN3990 Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1 Fixes: 38a1390e02b7 ("ath10k: dma unmap mgmt tx buffer if wmi cmd send fails") Signed-off-by: Rakesh Pillai Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: fix memory leak

2020-01-14T19:07:07+00:00

commit b8d17e7d93d2beb89e4f34c59996376b8b544792 upstream. In ath10k_usb_hif_tx_sg the allocated urb should be released if usb_submit_urb fails. Signed-off-by: Navid Emamdoost Signed-off-by: Kalle Valo Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman