kernel/linux.git/drivers/net/wireless/ath, branch v3.18.62

ath9k_htc: fix NULL-deref at probe

2017-05-25T12:17:57+00:00

commit ebeb36670ecac36c179b5fb5d5c88ff03ba191ec upstream. Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: 36bcce430657 ("ath9k_htc: Handle storage devices") Signed-off-by: Johan Hovold Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath9k: fix buffer overrun for ar9287

2016-07-12T12:47:38+00:00

[ Upstream commit 83d6f1f15f8cce844b0a131cbc63e444620e48b5 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by: Arnd Bergmann Fixes: 940cd2c12ebf ("ath9k_hw: merge the ar9287 version of ath9k_hw_get_gain_boundaries_pdadcs") Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.

2016-06-03T15:30:29+00:00

[ Upstream commit 0f9edcdd88a993914fa1d1dc369b35dc503979db ] The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: Cc: Cc: Cc: Signed-off-by: Vittorio Gambaletta Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath5k: Change led pin configuration for compaq c700 laptop

2016-06-01T20:23:30+00:00

[ Upstream commit 7b9bc799a445aea95f64f15e0083cb19b5789abe ] BugLink: http://bugs.launchpad.net/bugs/972604 Commit 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") added a pin configuration for the Compaq c700 laptop. However, the polarity of the led pin is reversed. It should be red for wifi off and blue for wifi on, but it is the opposite. This bug was reported in the following bug report: http://pad.lv/972604 Fixes: 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") Signed-off-by: Joseph Salisbury Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k: declare required extra tx headroom

2015-11-15T17:51:45+00:00

[ Upstream commit 029cd0370241641eb70235d205aa0b90c84dce44 ] ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath10k: fix dma_mapping_error() handling

2015-10-28T02:13:28+00:00

[ Upstream commit 5e55e3cbd1042cffa6249f22c10585e63f8a29bf ] The function returns 1 when DMA mapping fails. The driver would return bogus values and could possibly confuse itself if DMA failed. Fixes: 767d34fc67af ("ath10k: remove DMA mapping wrappers") Reported-by: Dan Carpenter Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k: fix DMA stop sequence for AR9003+

2015-07-04T03:02:24+00:00

[ Upstream commit 300f77c08ded96d33f492aaa02549103852f0c12 ] AR93xx and newer needs to stop rx before tx to avoid getting the DMA engine or MAC into a stuck state. This should reduce/fix the occurence of "Failed to stop Tx DMA" logspam. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath9k: fix tracking of enabled AP beacons

2015-04-24T21:13:54+00:00

[ Upstream commit 1cf48f22c98ae24a49a3f1b6900e4c9a9a0fcc62 ] sc->nbcnvifs tracks assigned beacon slots, not enabled beacons. Therefore, it cannot be used to decide if cur_conf->enable_beacon (bool) should be updated, or if beacons have been enabled already. With the current code (depending on the order of calls), beacons often do not get enabled in an AP+STA setup. To fix tracking of enabled beacons, convert cur_conf->enable_beacon to a bitmask of enabled beacon slots. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

ath5k: fix spontaneus AR5312 freezes

2015-03-24T01:02:53+00:00

commit 8bfae4f9938b6c1f033a5159febe97e441d6d526 upstream. Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby CC: Nick Kossifidis CC: Luis R. Rodriguez Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible") Reported-by: Christophe Prevotaux Tested-by: Christophe Prevotaux Tested-by: Eric Bree Signed-off-by: Sergey Ryazanov Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

ath5k: fix hardware queue index assignment

2015-01-16T14:59:45+00:00

commit 9e4982f6a51a2442f1bb588fee42521b44b4531c upstream. Like with ath9k, ath5k queues also need to be ordered by priority. queue_info->tqi_subtype already contains the correct index, so use it instead of relying on the order of ath5k_hw_setup_tx_queue calls. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville Signed-off-by: Greg Kroah-Hartman